Hacking DSI XL

I also hope we get an answer soon

If it ends up NOT working, i might just get a dsi instead (my ds lite broke T-T)
 
YayMii said:
You don't need the fix. If the Acekard shows up as Danny Phantom (which should only show in a DSi), then you shouldn't have any problems with the Acekard.

ok then since I see the acecard 2i logo it means I lack the 1.4 updated or so I hope. Also if you want a pic of my ds drop
me your email and illsend it now, or just wait till 5 e
EST and I'll try the 1.4 and pos a video if things remain to be borked
 
YayMii said:
You don't need the fix. If the Acekard shows up as Danny Phantom (which should only show in a DSi), then you shouldn't have any problems with the Acekard.

Thanks for the info..so since mine(When I ordered it) says on the site..

*Updated - Compatible with DSi Firmware 1.4

I dont have to do anything..I already own a DS Lite but I dont have to do the fix..just pop the card into the DSi XL and Im good to go..I wonder what happened with the other guy and why it was not working. I am ordering it from amazon.com so I dont want to buy it then find out it doesnt work..that is why I was kinda obsessed to find out if it had firmware 1.4 on it..it comes out tomorrow so someone here in the US must have gotten hold of it already
 
Ericthegreat said:
Oh ok maybe this will fix things, post back with results.


But of course it will work.............if you did some research is says right here what you need to do before trying an AK2i into a DSi ( or DSi XL since they are virtually the same ).
All this talking and alarming...........OMG IT DOESN'T WORK!!!!!
Have some common sense and just follow the tutorial, OK ? How much easier could it get ?

QUOTEYour acekard 2/i will not work on dsi 1.4u, e, j, or any other firmware without following step 5 in the new tutorial. Unless your acekard 2i was pre-updated by the seller to work on dsi firmware 1.4. If you didn't see anything about it being 1.4 compatible on the sellers website, then it probably isn't compatible with 1.4 firmware. So just follow step 5. Thanks.
wink.gif
 
Arm73 said:
Ericthegreat said:
Oh ok maybe this will fix things, post back with results.


But of course it will work.............if you did some research is says right here what you need to do before trying an AK2i into a DSi ( or DSi XL since they are virtually the same ).
All this talking and alarming...........OMG IT DOESN'T WORK!!!!!
Have some common sense and just follow the tutorial, OK ? How much easier could it get ?

QUOTEYour acekard 2/i will not work on dsi 1.4u, e, j, or any other firmware without following step 5 in the new tutorial. Unless your acekard 2i was pre-updated by the seller to work on dsi firmware 1.4. If you didn't see anything about it being 1.4 compatible on the sellers website, then it probably isn't compatible with 1.4 firmware. So just follow step 5. Thanks.
wink.gif

Thanks for the clarification..so since my AceKard 2i already says on the site where I bought it from says..

*Updated - Compatible with DSi Firmware 1.4

that means I dont have to do anything right..I pretty much take their word for it that they already put in the fix and its all good..I only have a DS Lite so I have never even tested my card on a DSi before so I have no clue so I just have to take their word for it
 
Lakerfanalways said:
Thanks for the clarification..so since my AceKard 2i already says on the site where I bought it from says..

*Updated - Compatible with DSi Firmware 1.4

that means I dont have to do anything right..I pretty much take their word for it that they already put in the fix and its all good..I only have a DS Lite so I have never even tested my card on a DSi before so I have no clue so I just have to take their word for it


It should workright out of the box, yes. And if it doesn't for some reason, you can use your DSL to flash your AK2i with the 1.4 fix. It's no big deal, just make sure your DSL is plugged in, run the flasher and wait a minute when it does its thing.
 
kaputnik said:
Lakerfanalways said:
Thanks for the clarification..so since my AceKard 2i already says on the site where I bought it from says..

*Updated - Compatible with DSi Firmware 1.4

that means I dont have to do anything right..I pretty much take their word for it that they already put in the fix and its all good..I only have a DS Lite so I have never even tested my card on a DSi before so I have no clue so I just have to take their word for it


It should workright out of the box, yes. And if it doesn't for some reason, you can use your DSL to flash your AK2i with the 1.4 fix. It's no big deal, just make sure your DSL is plugged in, run the flasher and wait a minute when it does its thing.

I have a DS Lite..not a DSi,,so I'm hoping my AceKard works..I was gonna buy a DSi but when I heard about the DSi XL I decided to wait..I just hope my AceKard ends up working with the DSi Xl..I have been waiting a long time for this release..mine is the real deal with AKAIO always works and I never have any issues, but I did read how some people have problems with the AceKard not fitting or its loose or something, that is something I would have no clue how to take care of
 
ok I got home and I used the firmware update posted on this thread and my DSi XL works. I just wanted to point out that when I bought the card it stated that it was 1.4 ready but that does not matter since it all ended well.

So everybody who was unsure wether to buy an XL or not go ahead the USA version is the same version as Japan and Europe.

happy.gif
Thanks for all the fast replies and all the help
 
oni222 said:
ok I got home and I used the firmware update posted on this thread and my DSi XL works. I just wanted to point out that when I bought the card it stated that it was 1.4 ready but that does not matter since it all ended well.

So everybody who was unsure wether to buy an XL or not go ahead the USA version is the same version as Japan and Europe.

happy.gif
Thanks for all the fast replies and all the help
 

Site & Scene News

Popular threads in this forum