1. JaymanUK

    JaymanUK Newbie
    Newcomer

    Joined:
    Oct 21, 2019
    Messages:
    5
    Country:
    United Kingdom
    Thanks I have checked eBay and ordered some should be here in a few days. I ordered the NTAG215 ones they sound kinda small but im sure they will work fine right? I don't think the size matters. Just need to get the phone now might pop out today and find one.
     
  2. Random11

    Random11 GBAtemp Fan
    Member

    Joined:
    Sep 16, 2008
    Messages:
    485
    Country:
    Canada
    You will want to print these at 100% scale. IE dont have your printer scale or stretch them. Also if you do a print preview and notice they look huge, try making sure the document is set to 300 dpi. I wrote a guide on how to layout the images and have your printer print them properly. It was written with my card sizes in mind though (with the extra bleed sections that are meant to be cut off) but you can try and use it for other cards as well)
     
  3. Acronix_SMO

    Acronix_SMO Newbie
    Newcomer

    Joined:
    Feb 15, 2019
    Messages:
    5
    Country:
    United States
    Are you considering making ones for Ken and the rest of the DLC? I love your designs.
     
  4. OhmBoy

    OhmBoy Newbie
    Newcomer

    Joined:
    Nov 4, 2017
    Messages:
    1
    Country:
    United States
    Wow. I typically lurk, but I feel the need to post to say that this is one of the most cogent, level-headed, articulate, and informatively assistive posts I have come across. Well thought out, non-emotional, and pleasantly stated. Nice.

    Ok... moving along now.
     
  5. Marc123

    Marc123 Newbie
    Newcomer

    Joined:
    Sep 13, 2019
    Messages:
    4
    Country:
    Spain
    Hi!
    I´m looking for some help, when the amiibo of link´s awakening was released I used this back image, but I lost all my hdd information and I recovered everything except this image, if someone have it or know where I can download, I will be thankful.
     

    Attached Files:

  6. EmanueleBGN

    EmanueleBGN GBAtemp Maniac
    Member

    Joined:
    Jul 22, 2015
    Messages:
    1,091
    Country:
    Italy
    Here
     
  7. Marc123

    Marc123 Newbie
    Newcomer

    Joined:
    Sep 13, 2019
    Messages:
    4
    Country:
    Spain
    Thanks you so much, but I don´t found the same picture, I´m looking for have like lines with a green logo with a palmtree like you see in the photo, if you have exactly this one, please tell me where it is, thanks!
     
  8. EmanueleBGN

    EmanueleBGN GBAtemp Maniac
    Member

    Joined:
    Jul 22, 2015
    Messages:
    1,091
    Country:
    Italy
    I had it, but I've updated the background adding the map instead.
    Edit: Now you can found them again ;)
     
    Last edited by EmanueleBGN, Dec 13, 2019
  9. Navie

    Navie Newbie
    Newcomer

    Joined:
    Apr 29, 2018
    Messages:
    6
    Country:
    Canada
    How did you guys print these on a PVC card and get a good card?
    I bought the TS8120 printer and printed some of these and the quality is 10/10 but the card is sticky and scratches super easily
    I don't get why its super sticky but its so annoying. Any time I try to tap the card to play BOTW, the cards stick to my hand

    Any help would be appreciated
     
    Last edited by Navie, Jan 13, 2020
  10. Random11

    Random11 GBAtemp Fan
    Member

    Joined:
    Sep 16, 2008
    Messages:
    485
    Country:
    Canada
    That seems to be the case for the ink jet cards. Pretty sure it’s sticky so the ink can absorb into the card. You could try spraying a light coat of satin finish onto it. I’d test it out on one card first though. And do it in light coats otherwise the ink might run. Just a suggestion.
     
    Navie likes this.
  11. Navie

    Navie Newbie
    Newcomer

    Joined:
    Apr 29, 2018
    Messages:
    6
    Country:
    Canada
    Thanks!
    I’ll try this and see what happens
     
  12. TerryG

    TerryG GBAtemp Regular
    Member

    Joined:
    Sep 14, 2009
    Messages:
    146
    Country:
    United States
    https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/112089561792

    I used those. Kind of tricky to install, but once you get the hang of it they look great.
     
    Navie likes this.
  13. Navie

    Navie Newbie
    Newcomer

    Joined:
    Apr 29, 2018
    Messages:
    6
    Country:
    Canada
    Which Thermal printer did you end up using?
    I see Series 1 and Series 3 but they're SO expensive

    If I want to make all 400some Animal Crossing cards, + BOTW + SSBU and then just sell the printer on Amazon at about a 20%-30% discount, that shouldn't cost TOO much and should still only cost me about a dollar per card on average if I order the PVC ones from AliExpress

    Found one called the Magicard Pronto ID Card Printer on Amazon for $1400 CAD which is a lot cheaper than the Zebra at $2000 CAD. Just don't know if it will work well
     
    Last edited by Navie, Jan 15, 2020
  14. Random11

    Random11 GBAtemp Fan
    Member

    Joined:
    Sep 16, 2008
    Messages:
    485
    Country:
    Canada
    Ya I gave up on the idea of buying one. It was just too expensive for a single use. And no one would rent me one.
     
  15. shanefromoz

    shanefromoz GBAtemp Advanced Maniac
    Member

    Joined:
    Jun 18, 2007
    Messages:
    1,665
    Country:
    Australia
    Does anyone please have the printable images for the entire set of Animal Crossing cards
     
  16. Pangatkd

    Pangatkd Newbie
    Newcomer

    Joined:
    Aug 1, 2019
    Messages:
    2
    Country:
    Brazil
    Good evening. Someone with images of Apollo and Pietro from Animal Crossing?
     
  17. Shintzuke

    Shintzuke Newbie
    Newcomer

    Joined:
    Jul 10, 2016
    Messages:
    4
    Country:
    Mexico
    Does anyone have a template for the animal crossing cards?
     
  18. Selo

    Selo Member
    Newcomer

    Joined:
    Jun 19, 2020
    Messages:
    10
    Country:
    Sweden
    Anyone have PVC card format for the cards not added here?
    66 and forward pretty much.
     
  19. Alorina

    Alorina Newbie
    Newcomer

    Joined:
    Dec 15, 2018
    Messages:
    8
    Country:
    Germany
    A few weeks ago Nintendo announced Joker (83) and Hero (84).
    Here are the cards I've made (english and german version of hero)
    Smash Bros 83 Joker.png Smash Bros 84 Held.png Smash Bros 84 Hero.png
     
    brrosasp and lordofthereef like this.
  20. brrosasp

    brrosasp Newbie
    Newcomer

    Joined:
    Sep 9, 2020
    Messages:
    1
    Country:
    Chile
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - CompCs, amiibo, Cards