Homebrew After Update 11.3 Luma Problems

[CrazyMaxx]

I have make Update 11.3 and Luma update to 6.6 and I use now the direct menuhax boot.3dsx or ctr boot.3dsx but every time the 3ds cant boot into luma the 3ds freeze on lighter black screen...

Normally 3ds are lighther screen after that dark and light but now always light...

What is the problem???

 

[Giodude]

I have make Update 11.3 and Luma update to 6.6 and I use now the direct menuhax boot.3dsx or ctr boot.3dsx but every time the 3ds cant boot into luma the 3ds freeze on lighter black screen...

Normally 3ds are lighther screen after that dark and light but now always light...

What is the problem???

what is your sysnand firmware?

 

[CrazyMaxx]

9.2E

 

[Giodude]

9.2E

I will tell you though that if you delete the firmware.bin file in your luma folder that will fix your issue, but i wouldn't recommend using menuhax. If you are really stubborn about it, i'll let you keep using menuhax, but i strongly recommend you install arm9loaderhax. Nowadays it's not only super easy to install but it has nearly zero chance of bricking.

 

[CrazyMaxx]

The problem is the sd from the 3ds is to big for Arm9loaderhax...
The sd has many probems... 128 GB

--------------------- MERGED ---------------------------

Big Thx, the 3ds from my friend works now, My hacked 3ds with arm9hax is window broken xD i must it repair

 

[NandoLawson]

Wait, what? How can a SD be to big for A9LH? You can use it as every other SD card.
I am using a 128GB with Arm9LoaderHax too btw.

 

[Giodude]

The problem is the sd from the 3ds is to big for Arm9loaderhax...
The sd has many probems... 128 GB

--------------------- MERGED ---------------------------

Big Thx, the 3ds from my friend works now, My hacked 3ds with arm9hax is window broken xD i must it repair

What i'd do:

1. uninstall menuhax

2. make an emunand backup

3. follow 3ds.guide and install arm9loaderhax, it's super easy.

4. when the guide says restore your sysnand, restore your emunand backup instead

then your sysnand will have all your data and games.

 

[CrazyMaxx]

Ok I try it later, for now I need a good Boot.3dsx my Luma work for now but my 3ds freeze now to often

 

[NandoLawson]

I think the 3dsx itself is not the problem. It is the menuhax payload. There was something called lesshax that was a bit better, but I don't know if it works anymore.

It won't take too much time to install A9LH. I'd recommend it to you.

 

[gnmmarechal]

I think the 3dsx itself is not the problem. It is the menuhax payload. There was something called lesshax that was a bit better, but I don't know if it works anymore.

It won't take too much time to install A9LH. I'd recommend it to you.

I am fairly sure it was not better, it literally just removed the colours iirc.

 

[CrazyMaxx]

Ok, I have start the A9LH and after I start Safehax I boot in Luma ???? WTF

 

[BL4Z3D247]

Ok, I have start the A9LH and after I start Safehax I boot in Luma ???? WTF

What section and step are you at on the guide?

Edit: Did you put "Decrypt9WIP.bin" on the root of your SD card and rename it to "safehaxpayload.bin"?

Decrypt9 should boot when you select safehax from the HBL. Also make sure you have a game cart in the game slot or Decrypt9 won't boot.

 

[goldensun87]

Ok, I have start the A9LH and after I start Safehax I boot in Luma ???? WTF

Safehax gets you into Decrypt9. With Decrypt9, you are supposed to downgrade to firmware 2.1, and in the process, back up your current NAND before flashing back. You are still far from booting Luma. And, did you make sure your 3DS' wireless is on before starting the process?

 

[CrazyMaxx]

Ok we dit it never Meunhax

 

[Blakinu]

I have the same problem, when I updated to 11.3 luma 3ds won't just launch, and there is no firmware.bin in my sd.
I rebuilt my emunand to 10.7 and it works now but as fast as I update to 11.3 it will stay in a light screen, any idea?

 

[CrazyMaxx]

I have installed A9LH... Is your best way to boot 100%

 

[Blakinu]

But I don't want to downgrade to 2.2, however, can you go online with a 2.2 11.3 sysnand?

 

[erman1337]

But I don't want to downgrade to 2.2, however, can you go online with a 2.2 11.3 sysnand?

The downgrade is temporary, in the end you'll be in the latest firmware

 

[Blakinu]

I guess so, but nothing guarantees me I wont get the same trouble so I prefer fixing this first

 

[Blakinu]

Just installed a9hl, is it possible to add custom 3ds themes without messing up the whole installation since there's no menuhax involved¿?