edited:Check the screen connectors (top right corner) especially that for the backlight (has 2 lanes). Most likely it didn't connect properly.
if you still need one of these, i have a spare from my dead n3ds xl I an trade for cheaphttp://www.ebay.com/itm/111942507667?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
If you know guys where to get the bottom screen of 3ds xl 2015 let me know.
You mean you are getting the same blue error screen that happens when a SD reader is connected to NAND (or NAND is inaccessible somehow)?Guys, my 3ds is working again! but it works for a min then it turns off! Not only that I get blue screen if I enter wifi settings!
Please advise.
You mean you are getting the same blue error screen that happens when a SD reader is connected to NAND (or NAND is inaccessible somehow)?
I thought that error screen could only happen at boot time.
Anyway, it seems like something is still not connected properly. There are only a handful of things that can cause the 3DS to turn off by itself (dead battery, blown fuse, certain ribbon cables not connected properly, probably a couple things I'm forgetting) but all of these scenarios would normally cause the 3DS to turn off immediately when turned on. Since you get a blue screen when entering wifi settings, maybe the wifi antenna is not connected properly.
If you're careful, you should be able to remove and reattach the ribbon cables, just as long as you don't break the ribbon cables, or the zif sockets, which I hear are very easy to break as well.The problem is 3ds ribbons once removed never attach back properly. I dont want to remove a capacitor and try again, damn this 3ds is hard to fix.
I should note if I enter recovery mode, the shutdown thing doesnt happen