Hacking Sys-Clk module not running

MelvinSmiley · Jun 26, 2022

Seems that messages like this are being ignored here, there's already a thread from a user with the same problem that nobody answered. WTF is wrong with this module? I spent 6 hours trying to make it work, overclocking the switch was the only reason I event tried to mess with CFW so I kinda need this to work. First it didn't work, then it did, and now it just won't run no matter what I do. I'm on latest atmosphere 13.2 and FW 14.2, trying to install sys-clk 1.0.2. Uninstalled and reinstalled it countless times to no avail.

sys-clk does not seem to be running, please check that it is correctly installed and enabled

This module is the bane of my existence.

binkinator · Jun 26, 2022

MelvinSmiley said:
Seems that messages like this are being ignored here, there's already a thread from a user with the same problem that nobody answered. WTF is wrong with this module? I spent 6 hours trying to make it work, overclocking the switch was the only reason I event tried to mess with CFW so I kinda need this to work. First it didn't work, then it did, and now it just won't run no matter what I do. I'm on latest atmosphere 13.1 and FW 14.2, trying to install sys-clk 1.0.2. Uninstalled and reinstalled it countless times to no avail.

sys-clk does not seem to be running, please check that it is correctly installed and enabled
This module is the bane of my existence.

Yeah, not sure man. Just a data point and answer for you but no solutions I’m afraid.

I’m on 14.1.2 | AMS 1.3.2 | E and sync lock is running without issues.

Haven’t had enough issues with this module to be able to duplicate this issue.

e: did spot one difference…I’m still on 1.0.1-5 rather than 1.0.2

Going to upgrade and see if I can break it.

MelvinSmiley · Jun 26, 2022

I tried sys-clk-1.0.1 from their github page and have the same issue, seems this module is just incompatible with atmosphere 13.2, at least for me.

binkinator · Jun 26, 2022

MelvinSmiley said:
I tried sys-clk-1.0.1 from their github page and have the same issue, seems this module is just incompatible with atmosphere 13.2, at least for me.

Yeah…I think it’s something else with your setup. I’m on 1.3.2 as well. Latest and greatest everything. Perhaps you have a bad config in place that’s causing it to fail regardless of the version?

MelvinSmiley · Jun 26, 2022

binkinator said:
Yeah…I think it’s something else with your setup. I’m on 1.3.2 as well. Latest and greatest everything. Perhaps you have a bad config in place that’s causing it to fail regardless of the version?

My hekate.ini config is just the usual stuff they recommend in cfw guides, nothing extraordinary. It used to work with my system too, for about 5 minutes, and then after a reboot it wouldn't load anymore. Had no issues running other homebrew software, just this sys clk module. Well, I guess there's nothing I can do atm except wait for an update.

binkinator · Jun 26, 2022

MelvinSmiley said:
My hekate.ini config is just the usual stuff they recommend in cfw guides, nothing extraordinary. It used to work with my system too, for about 5 minutes, and then after a reboot it wouldn't load anymore. Had no issues running other homebrew software, just this sys clk module. Well, I guess there's nothing I can do atm except wait for an update.

How about your sys-clk config? Any kruft stored there perhaps?

MelvinSmiley · Jun 26, 2022

It's just the usual stuff in their config.ini.template, [values] temp_log_interval_ms=0 csv_write_interval_ms=0
and 2 overclocking examples that are formatted as comments so they don't work anyway. Tried changing the config.ini.template to config.ini, didn't do anything.

binkinator · Jun 26, 2022

MelvinSmiley said:
It's just the usual stuff in their config.ini.template, [values] temp_log_interval_ms=0 csv_write_interval_ms=0
and 2 overclocking examples that are formatted as comments so they don't work anyway. Tried changing the config.ini.template to config.ini, didn't do anything.

Is there anything in /config/sys-clk/log.txt?

e: looks like you need to have /config/sys-clk/log.flag set to get logs, but it might be worth a clue.

I see you opened a ticket on github. Good stuff.

I was thinking github or the official gbatemp thread for it: https://gbatemp.net/threads/sys-clk-under-overclocking-sysmodule.531372/page-58

MelvinSmiley · Jun 26, 2022

[2022-06-26 17:17:33.007] === sys-clk 1.0.1 ===
[2022-06-26 17:17:37.728] Ready
[2022-06-26 17:17:37.751] [mgr] sys-clk status: enabled
[2022-06-26 17:17:37.764] [mgr] TitleID change: 0100000000001000
[2022-06-26 17:17:37.776] [mgr] CPU clock change: 1020.0 Mhz
[2022-06-26 17:17:37.788] [mgr] GPU clock change: 307.2 Mhz
[2022-06-26 17:17:37.801] [mgr] Memory clock change: 1331.2 Mhz
[2022-06-26 17:17:37.822] [!] ASSERT_RESULT_OK: tsGetTemperatureMilliC
RC: [0xf601] 0001-0123
in /home/sam/workspace/switch/sys-clk/sysmodule/src/clocks.cpp:325
[2022-06-26 17:17:37.881] Exit
[2022-06-26 17:19:10.004] === sys-clk 1.0.1 ===
[2022-06-26 17:19:14.689] Ready
[2022-06-26 17:19:14.705] [mgr] sys-clk status: enabled
[2022-06-26 17:19:14.721] [mgr] TitleID change: 0100000000001000
[2022-06-26 17:19:14.733] [mgr] CPU clock change: 1020.0 Mhz
[2022-06-26 17:19:14.744] [mgr] GPU clock change: 307.2 Mhz
[2022-06-26 17:19:14.757] [mgr] Memory clock change: 1331.2 Mhz
[2022-06-26 17:19:14.770] [!] ASSERT_RESULT_OK: tsGetTemperatureMilliC
RC: [0xf601] 0001-0123
in /home/sam/workspace/switch/sys-clk/sysmodule/src/clocks.cpp:325
[2022-06-26 17:19:14.783] Exit

Hm, it looks like the module itself is working, it's just the overlay that is broken for some reason.

binkinator · Jun 26, 2022

MelvinSmiley said:
[2022-06-26 17:17:33.007] === sys-clk 1.0.1 ===
[2022-06-26 17:17:37.728] Ready
[2022-06-26 17:17:37.751] [mgr] sys-clk status: enabled
[2022-06-26 17:17:37.764] [mgr] TitleID change: 0100000000001000
[2022-06-26 17:17:37.776] [mgr] CPU clock change: 1020.0 Mhz
[2022-06-26 17:17:37.788] [mgr] GPU clock change: 307.2 Mhz
[2022-06-26 17:17:37.801] [mgr] Memory clock change: 1331.2 Mhz
[2022-06-26 17:17:37.822] [!] ASSERT_RESULT_OK: tsGetTemperatureMilliC
RC: [0xf601] 0001-0123
in /home/sam/workspace/switch/sys-clk/sysmodule/src/clocks.cpp:325
[2022-06-26 17:17:37.881] Exit
[2022-06-26 17:19:10.004] === sys-clk 1.0.1 ===
[2022-06-26 17:19:14.689] Ready
[2022-06-26 17:19:14.705] [mgr] sys-clk status: enabled
[2022-06-26 17:19:14.721] [mgr] TitleID change: 0100000000001000
[2022-06-26 17:19:14.733] [mgr] CPU clock change: 1020.0 Mhz
[2022-06-26 17:19:14.744] [mgr] GPU clock change: 307.2 Mhz
[2022-06-26 17:19:14.757] [mgr] Memory clock change: 1331.2 Mhz
[2022-06-26 17:19:14.770] [!] ASSERT_RESULT_OK: tsGetTemperatureMilliC
RC: [0xf601] 0001-0123
in /home/sam/workspace/switch/sys-clk/sysmodule/src/clocks.cpp:325
[2022-06-26 17:19:14.783] Exit

Hm, it looks like the module itself is working, it's just the overlay that is broken for some reason.

Yeah, that looks good.

side note: the version is still 1.0.1…I don’t think they bumped the revision For 1.0.2

E: attaching my working overlay in a zip file if you want to temporarily try it and see if that fixes things…

MelvinSmiley · Jun 26, 2022

binkinator said:
Yeah, that looks good.

side note: the version is still 1.0.1…I don’t think they bumped the revision For 1.0.2

E: attaching my working overlay in a zip file if you want to temporarily try it and see if that fixes things…

Thx, will try that.

StringIsNullOrEmpty · Jun 26, 2022

Have you tried rebooting the machine?
I had problems with sys-clk, too, even with a very bare-bones setup. I discovered that rebooting the machine was necessary.

MelvinSmiley · Jun 26, 2022

I tried the "uncapped gpu and other extras" sys clk fork and now the overlay works for some reason, hope it stays that way.

MelvinSmiley · Jun 26, 2022

StringIsNullOrEmpty said:
Have you tried rebooting the machine?
I had problems with sys-clk, too, even with a very bare-bones setup. I discovered that rebooting the machine was necessary.

Reboots did nothing for me unfortunately but the 10.2a "uncapped gpu and other extras" sys clk fork works for now.

binkinator · Jun 26, 2022

MelvinSmiley said:
I tried the "uncapped gpu and other extras" sys clk fork and now the overlay works for some reason, hope it stays that way.

Was just looking at that guy…it’s ahead of main. Why not? Glad you’re sorted!

…for those following along: https://github.com/jope82/sys-clk-uncapped-gpu-and-other-extras

MelvinSmiley · Jun 26, 2022

binkinator said:
Was just looking at that guy…it’s ahead of main. Why not? Glad you’re sorted!

…for those following along: https://github.com/jope82/sys-clk-uncapped-gpu-and-other-extras

I'm very happy too, will keep my system as it is now for the foreseeable time so it doesn't break again, lol.

Metoroid0 · Jan 23, 2023

How did you solved the issue, cause i have the same error?

binkinator · Jan 23, 2023

Metoroid0 said:
How did you solved the issue, cause i have the same error?

What issue are you seeing and what have you done thus far to try and fix it?

Metoroid0 · Jan 23, 2023

binkinator said:
What issue are you seeing and what have you done thus far to try and fix it?

"sys-clk does not seem to be running, please check that it is correctly installed and enabled"

In Tesla overlay and in app. I have a suspicion that app itself is broken. Im on latest update and atmosphere.

binkinator · Jan 23, 2023

Metoroid0 said:
sys-clk does not seem to be running, please check that it is correctly installed and enabled

Did you install sys-clk? how did you go about that?

did you enable sys-clk? Is it actually running?

Hacking Sys-Clk module not running

Member

sys-clk does not seem to be running, please check that it is correctly installed and enabled​

Garfield’s Fitness Coach

sys-clk does not seem to be running, please check that it is correctly installed and enabled​

Member

Garfield’s Fitness Coach

Member

Garfield’s Fitness Coach

Member

Garfield’s Fitness Coach

Member

Garfield’s Fitness Coach

Attachments

Member

Well-Known Member

Member

Member

Garfield’s Fitness Coach

Member

Samus Aran

Garfield’s Fitness Coach

Samus Aran

"sys-clk does not seem to be running, please check that it is correctly installed and enabled"​

In Tesla overlay and in app. I have a suspicion that app itself is broken. Im on latest update and atmosphere.​

Garfield’s Fitness Coach

sys-clk does not seem to be running, please check that it is correctly installed and enabled​

Similar threads

Popular threads in this forum

sys-clk does not seem to be running, please check that it is correctly installed and enabled

sys-clk does not seem to be running, please check that it is correctly installed and enabled

"sys-clk does not seem to be running, please check that it is correctly installed and enabled"

In Tesla overlay and in app. I have a suspicion that app itself is broken. Im on latest update and atmosphere.

sys-clk does not seem to be running, please check that it is correctly installed and enabled