Try the paperclip method first.i have been having the same problem i should try use tinfoil or a wire
I'm having trouble injecting a payload. The site I got the software on my SD card from was listed as being updated to work with all versions up to 7.0.1 (which is what I have) and when I use TegraRCM to inject the payload, it freezes. Full not-responding. I know my Switch is in RCM mode because TegraRCM recognizes it. What can I do here? My switch isn't dead, because I can still get it to boot normally once I unplug it. I think I might have the wrong APX driver but I don't know how to check which one is active.
I restarted my laptop and it worked .-.As long as you installed the APX driver using TegraRCM, I don't think you would have an incorrect driver.
Which version of tegraRCM are you running?
Which payload are you trying to inject?
Are you sure you have a hackable, as in non-Ipatched, Switch? Just because you can put it in RCM and Tegra detects it, doesn't mean it is hackable.
You need modchip for v2just found out xkw70006088 is not hackable will i have to wait for this patch to be hackalable
But was that worth bumping this 2 year old thread for???just found out xkw70006088 is not hackable will i have to wait for this patch to be hackalable
Nvm it was just my jig I got it working nowI’m also having trouble with this. I recently updated to the newest firmware. I forgot to update the atmosphere so I thought that would solve my problem. I’ve been sitting here trying to load into RCM for the past 20 minutes and everytime it keeps booting up normally
i understand that but on my computer the rcm screen does not turn green there fore i cant inject payload. my switch does everything right. my pc does not recognize it 5 usb cords in different ports. my other switches do get recognized by my switchSo much misinformation here.
RCM:
-Pin 10 on the rail/joycon needs to be grounded.
- Hold volume + and power
If it boots into RCM nothing happens, no backlight nothing. If u just press power it will boot normal.
USB does not need to be connected, that is only for when you execute a payload.
Do you have any pics of your setup?