Hi everyone, this my first post on this great forum that helped me more than one time before ! Sorry for my English, I will try my best.
So yesterday I installed the SX Core in my mariko switch. Everything went fine I activated my sx os licence and all. I wanted then to make a nand dump and it was stuck at 44% for about 2 hours with a frozen screen. So I decided to force it to reboot because the console wasn't responding at all. And now when I boot the switch, the screen randomly freezes and I have to force reboot it. The freeze comes after around 10sec to 3min. I checked all my solder joints everything is ok, i didn't knock off any components of the motherboard. I even desoldered the sx core and the switch is still having the issue !
Oh and I had sometimes errors (each one once) : 2168-0002, 2011-0301 and an orange screen but that last one happened after I removed the sx core.
This morning I reinstalled the sx core back in the console and tried to dump the nand again and was only able to dump boot0 and boot1 because it was stuck on 0% of dumping raw nand. I also had the 2011-0301 sx os error this morning.
I noted that the fan never spins, it like it doesn't has time to spin that the switch freezes. I wander if it is a nand corruption or a hardware problem.
Also I do daily soldering repairs for a living, not on components that small but I am not a beginner. It is possible I damaged the board but I checked it and found nothing.
I don't know what I could do, so if anybody knows what I could do or try I am all ears.
Thanks
So yesterday I installed the SX Core in my mariko switch. Everything went fine I activated my sx os licence and all. I wanted then to make a nand dump and it was stuck at 44% for about 2 hours with a frozen screen. So I decided to force it to reboot because the console wasn't responding at all. And now when I boot the switch, the screen randomly freezes and I have to force reboot it. The freeze comes after around 10sec to 3min. I checked all my solder joints everything is ok, i didn't knock off any components of the motherboard. I even desoldered the sx core and the switch is still having the issue !
Oh and I had sometimes errors (each one once) : 2168-0002, 2011-0301 and an orange screen but that last one happened after I removed the sx core.
This morning I reinstalled the sx core back in the console and tried to dump the nand again and was only able to dump boot0 and boot1 because it was stuck on 0% of dumping raw nand. I also had the 2011-0301 sx os error this morning.
I noted that the fan never spins, it like it doesn't has time to spin that the switch freezes. I wander if it is a nand corruption or a hardware problem.
Also I do daily soldering repairs for a living, not on components that small but I am not a beginner. It is possible I damaged the board but I checked it and found nothing.
I don't know what I could do, so if anybody knows what I could do or try I am all ears.
Thanks