TX Presents SX OS v2.9.3 BETA - Fully Supports v9.1.0

altorn · Dec 11, 2019

jaysea said:
I would suggest getting sysnand to 9.1.0. Then create an emunand and downgrade that to 9.0.1. So use SX afterwards.

may i ask, why not make a NAND backup, use ChoiNX to update sysNAND to 9.1.0 then create 9.1.0 emunand? is there anything wrong with this method?

jaysea · Dec 11, 2019

altorn said:
may i ask, why not make a NAND backup, use ChoiNX to update sysNAND to 9.1.0 then create 9.1.0 emunand? is there anything wrong with this method?

I wouldn't use Choi on sysnand ever.

mrlkn · Dec 12, 2019

That is all we have for today. We know everyone is eagerly anticipating news on our upcoming solution for patched consoles (fuse-patched, mariko, switch lite).. please hang in there, we will NOT disappoint
:bow:

Switch_Maniac · Dec 12, 2019

richardZeldaModder said:
I’m new to this. Have an unpatched Switch on version 8.0 I think. Can I update to 9.1.0 before using SX OS for the first time? Or do I use SX OS first, and then update the synand to 9.1.0?

There is really no reason to update to 9.1 atm if your Switch is on 8.x. You can make a nand backup first. Highly recommended and then just create an emunand and update that with ChoijudourNX to 9.0.1 or 9.1 if you really need to. If you are trying to keep your sysnand clean and play online with it, then just update to 9.1 and then create an emunand. SX and Atmo both support 9.1, though some homebrew still needs to be updated.

jaysea said:
I would suggest getting sysnand to 9.1.0. Then create an emunand and downgrade that to 9.0.1. So use SX afterwards.

Why not just create an emunand first and then update your sysnand to 9.1 if you need it on the sysnand and just go straight to 9.0.1 on emunand if that's the goal? Adding a downgrade step is completely unnecessary. Or just leave the sysnand alone altogether and create/upgrade emunand to 9.0.1 as not much even needs to the new master key yet.

jaysea · Dec 12, 2019

Switch_Maniac said:
There is really no reason to update to 9.1 atm if your Switch is on 8.x. You can make a nand backup first. Highly recommended and then just create an emunand and update that with ChoijudourNX to 9.0.1 or 9.1 if you really need to. If you are trying to keep your sysnand clean and play online with it, then just update to 9.1 and then create an emunand. SX and Atmo both support 9.1, though some homebrew still needs to be updated.

Why not just create an emunand first and then update your sysnand to 9.1 if you need it on the sysnand and just go straight to 9.0.1 on emunand if that's the goal? Adding a downgrade step is completely unnecessary. Or just leave the sysnand alone altogether and create/upgrade emunand to 9.0.1 as not much even needs to the new master key yet.

Downgrading an emunand created from 9.1.0 to 9.0.1 is safer since the gc fw has been updated in 9.0.1. Creating an emunand from 8.x and then upgrading sysnand will make your emunand crash if it has a gamecard inserted.
Also if you upgrade your 8.x emunand to 9.0.1 afterwards, you do the exact same amount of steps. Only you upgrade instead of downgrade.

Reecey · Dec 12, 2019

jaysea said:
Downgrading an emunand created from 9.1.0 to 9.0.1 is safer since the gc fw has been updated in 9.0.1. Creating an emunand from 8.x and then upgrading sysnand will make your emunand crash if it has a gamecard inserted.
Also if you upgrade your 8.x emunand to 9.0.1 afterwards, you do the exact same amount of steps. Only you upgrade instead of downgrade.

Is this one of those cryptic messages were you have to pick out certain words to find out the true answer.. some 007 Bond business!

Switch_Maniac · Dec 12, 2019

jaysea said:
Downgrading an emunand created from 9.1.0 to 9.0.1 is safer since the gc fw has been updated in 9.0.1. Creating an emunand from 8.x and then upgrading sysnand will make your emunand crash if it has a gamecard inserted.
Also if you upgrade your 8.x emunand to 9.0.1 afterwards, you do the exact same amount of steps. Only you upgrade instead of downgrade.

It was updated in 9.0 and before that 4.1 I think. My point is if you update to 9.1 sysnand or emunand, there's not reason to go down to 9.0.1. You're not gaining anything by doing that as most homebrew, if it hasn't already, needs to be updated to support the changes made in 9.x anyways. Atmo is removing their backwards compatibility with older homebrew or did already in this last release and I am sure SX is the same or will be.

Also to note, it will not make your emunand crash if you have a cart in since your emunand would be on 9.1. It will make your sysnand crash however if your sysnand is lower.

mattytrog · Dec 12, 2019

For development, modding and homebrew, Atmosphere reigns supreme.

For gaming, cheats, and ease of use, SXOS reigns supreme.

Both have merits, comparing apples to oranges. No need to troll on either side. It's a good thing there is a choice. It keeps Devs on their competitive toes.

We wouldn't be as far along as we are without both cfw bringing different things to the table.

Switch_Maniac · Dec 13, 2019

mattytrog said:
For development, modding and homebrew, Atmosphere reigns supreme.

For gaming, cheats, and ease of use, SXOS reigns supreme.

Both have merits, comparing apples to oranges. No need to troll on either side. It's a good thing there is a choice. It keeps Devs on their competitive toes.

We wouldn't be as far along as we are without both cfw bringing different things to the table.

If only more of the scene thought like you, imagine what could be accomplished. It's sad to see all the shit posting all the time on here from both sides. I try not to take side since I use both, but sometimes you just have to call BS out when you see it too.

jaysea · Dec 13, 2019

Switch_Maniac said:
It was updated in 9.0 and before that 4.1 I think. My point is if you update to 9.1 sysnand or emunand, there's not reason to go down to 9.0.1. You're not gaining anything by doing that as most homebrew, if it hasn't already, needs to be updated to support the changes made in 9.x anyways. Atmo is removing their backwards compatibility with older homebrew or did already in this last release and I am sure SX is the same or will be.

Also to note, it will not make your emunand crash if you have a cart in since your emunand would be on 9.1. It will make your sysnand crash however if your sysnand is lower.

Emunand 9.1.0 needs sx os 2.9.3 which is bugged in installing games. That is why I advice 9.0.1 with 2.9.2.

Switch_Maniac · Dec 13, 2019

jaysea said:
Emunand 9.1.0 needs sx os 2.9.3 which is bugged in installing games. That is why I advice 9.0.1 with 2.9.2.

Then it makes more sense to just leave the sysnand at 8.x unless the person needs to play online and update emunand right to 9.0.1.

What bugs? Just curious cause I haven't seen anything game breaking in their discord or forums. Other than the autoloader needing to be updated, lock screen themes not working, Mario Odyssey weird issue with mounted XCI and the other weird issue with having a linked account and turning stealth mode off in games like SSM2 and SSB.

jaysea · Dec 13, 2019

Switch_Maniac said:
Then it makes more sense to just leave the sysnand at 8.x unless the person needs to play online and update emunand right to 9.0.1.

What bugs? Just curious cause I haven't seen anything game breaking in their discord or forums. Other than the autoloader needing to be updated, lock screen themes not working, Mario Odyssey weird issue with mounted XCI and the other weird issue with having a linked account and turning stealth mode off in games like SSM2 and SSB.

To play online sysnand 9.1.0 indeed. I have several .nsz files that installed correctly on 2.9.2 and are playable which say to be corrupt when you install them on 2.9.3.
One of them is PMSH.

aforty · Dec 13, 2019

Sorry if this has been answered before, I looked but couldn't find the answer. Do I update to this beta first, then update my emunand? Or update my unmoved switch first, and then the emunand? What's the order here?

Switch_Maniac · Dec 13, 2019

jaysea said:
To play online sysnand 9.1.0 indeed. I have several .nsz files that installed correctly on 2.9.2 and are playable which say to be corrupt when you install them on 2.9.3.
One of them is PMSH.

Does it install fine as an NSP or XCI? Just curious if it's a NSZ thing specifically or something with installing it on 2.9.3.

Nincompoopdo · Dec 14, 2019

mattytrog said:
For development, modding and homebrew, Atmosphere reigns supreme.

For gaming, cheats, and ease of use, SXOS reigns supreme.

What you're saying is:

SXOS = Windows
Atmosphere = Linux

mattytrog · Dec 14, 2019

Nincompoopdo said:
What you're saying is:

SXOS = Windows
Atmosphere = Linux

That anology does fit quite well

jaysea · Dec 14, 2019

Switch_Maniac said:
Does it install fine as an NSP or XCI? Just curious if it's a NSZ thing specifically or something with installing it on 2.9.3.

the nsz and xci install fine. Only the xci install is playable, the nsz install says that the game is corrupt.

comput3rus3r · Dec 14, 2019

is the TX discord server down? it disappeared from my server list. also xecuter website down too.

Switch_Maniac · Dec 14, 2019

comput3rus3r said:
is the TX discord server down? it disappeared from my server list. also xecuter website down too.

Only discord disappeared for me. Sites work just fine.

dsrules · Dec 14, 2019

comput3rus3r said:
is the TX discord server down? it disappeared from my server list. also xecuter website down too.

discord is down for maintenance, website is working fine tho

dsrules · Dec 14, 2019

comput3rus3r said:
is the TX discord server down? it disappeared from my server list. also xecuter website down too.

discord is down for maintenance, website is working fine tho

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Mario 64 (favorite game of all time)

Well-Known Member

You don`t want to listen to anything I say.

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

You don`t want to listen to anything I say.

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum