As I'm new into this, I will describe all the steps I took already so you will have as much context as possible to support and I thank you in advance.
Switch was bought 3 years ago in China, but is an international version. It was patched and as SX Core lite firmware V1.3
The consol Type is Mariko
HOS is 10.2.0
Never as been updated, never has been online
My son would like to play the latest game and I need to update HOS. So decided to update to ATM.
It took me some times but I have downloaded the latest version of Hekate V6.0.5 and atmosphere-1.5.3-master-85c23b578+hbl-2.4.3+hbmenu-3.5.1.
I have setup SX Gear V1.1
I'm a embedded system developper by training so I understand what a config file or ini file is and how to edit them.
I followed this tutorials but because i-mnew I cannot share the links with you
I have regenerated and flashed my Boot0 without any change
My current status is as follow:
My Root directory
03/12/20 16:51 <DIR> Nintendo
19/05/24 20:01 <DIR> backup
19/05/24 20:01 <DIR> emuMMC
07/09/22 17:49 <DIR> bootloader
07/09/22 17:49 <DIR> atmosphere
07/09/22 17:49 <DIR> switch
15/06/23 22:25 110 080 fusee.bin
03/12/20 18:06 256 license.dat
15/06/23 22:28 41 boot.ini
04/12/20 02:21 11 520 boot.dat
09/06/23 20:02 109 320 hekate_ctcaer_6.0.5.bin
14/06/22 15:21 1 665 011 hbmenu.nro
My Bootloader directory
07/09/22 17:49 <DIR> res
07/09/22 17:49 <DIR> sys
15/06/23 21:46 144 nyx.ini
15/06/23 21:57 <DIR> ini
06/04/23 17:43 <DIR> payloads
09/06/23 20:02 109 320 update.bin
15/06/23 22:37 579 hekate_ipl.ini
27/05/23 20:21 19 183 patches.ini
15/06/23 22:59 234 exosphere.ini
My hekate_ipl.ini
[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0
{------ Atmosphere ------}
{Pick this option to launch CFW.}
[Atmosphere]
payload=atmosphere/fusee.bin
icon=bootloader/res/icon_payload.bmp
{ }
[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
icon=bootloader/res/icon_payload.bmp
{------ Stock ------}
{NOTE: This option does not launch CFW.}
[Stock]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp
{ }
My exosphere.ini [exosphere]
debugmode=1
debugmode_user=0
disable_user_exception_handlers=0
enable_user_pmu_access=0
blank_prodinfo_sysmmc=1
blank_prodinfo_emummc=0
allow_writing_to_cal_sysmmc=0
log_port=0
log_baud_rate=115200
log_inverted=0
My Boot0 regeneration
emmchaccgen --keys universal_prod.keys --fw FW --mariko
EmmcHaccGen started
Indexing nca files...
EmmcHaccGen will now generate firmware files using the following settings:
fw: 10.2.0
Exfat Support: True
Key path: universal_prod.keys
Destination folder: a-10.2.0_exFAT
Mariko boot generation: True
Save version: v5
AutoRCM: False
Creating folders..
Generating bis..
Wrote 0x00180000 bytes to a-10.2.0_exFAT/BOOT0.bin
Wrote 0x00080000 bytes to a-10.2.0_exFAT/BOOT1.bin
Wrote 0x00800000 bytes to a-10.2.0_exFAT/BCPKG2-1-Normal-Main.bin
Wrote 0x00800000 bytes to a-10.2.0_exFAT/BCPKG2-2-Normal-Sub.bin
Wrote 0x00800000 bytes to a-10.2.0_exFAT/BCPKG2-3-SafeMode-Main.bin
Wrote 0x00800000 bytes to a-10.2.0_exFAT/BCPKG2-4-SafeMode-Sub.bin
Wrote 0x01200025 bytes to a-10.2.0_exFAT/boot.bis
Copying files...
Setting archive bits..
Generating imkvdb..
Wrote save with an imvkdb size of 0x2C18
I can go back to SX OS I have a backup
I'm now booting on Hekate without any problem and for the moment I'm trying to chain boot to ATM.
If I try to run [Atmosphere] I end up with an error message stating after seeing the ATM splash screen for a fraction of second:
A fatal error occurred when running Fusee.
Package1 seems corrupt!
Press POWER to reboot
if I try to run [CFW - emuMMC] I end up with an error message in vertical mode stating:
Wrong pkg1 flashed:
Erista pkg1 on Mariko!
Trying backup bootloader...
Found pkg1 <' pG pG~'>.
Wrong pkg1 flashed:
Erista pkg1 on Mariko!
Failed to launch HOS!
Press any key...
I have now tried so many things that I do not know from which angle to take it and I would love to have new pair of eyes on this one.
I appreciate any advice.
Thank you
My question is very technical. If I missed any information to get some support let me know.
Thank you
Switch was bought 3 years ago in China, but is an international version. It was patched and as SX Core lite firmware V1.3
The consol Type is Mariko
HOS is 10.2.0
Never as been updated, never has been online
My son would like to play the latest game and I need to update HOS. So decided to update to ATM.
It took me some times but I have downloaded the latest version of Hekate V6.0.5 and atmosphere-1.5.3-master-85c23b578+hbl-2.4.3+hbmenu-3.5.1.
I have setup SX Gear V1.1
I'm a embedded system developper by training so I understand what a config file or ini file is and how to edit them.
I followed this tutorials but because i-mnew I cannot share the links with you
I have regenerated and flashed my Boot0 without any change
My current status is as follow:
My Root directory
03/12/20 16:51 <DIR> Nintendo
19/05/24 20:01 <DIR> backup
19/05/24 20:01 <DIR> emuMMC
07/09/22 17:49 <DIR> bootloader
07/09/22 17:49 <DIR> atmosphere
07/09/22 17:49 <DIR> switch
15/06/23 22:25 110 080 fusee.bin
03/12/20 18:06 256 license.dat
15/06/23 22:28 41 boot.ini
04/12/20 02:21 11 520 boot.dat
09/06/23 20:02 109 320 hekate_ctcaer_6.0.5.bin
14/06/22 15:21 1 665 011 hbmenu.nro
My Bootloader directory
07/09/22 17:49 <DIR> res
07/09/22 17:49 <DIR> sys
15/06/23 21:46 144 nyx.ini
15/06/23 21:57 <DIR> ini
06/04/23 17:43 <DIR> payloads
09/06/23 20:02 109 320 update.bin
15/06/23 22:37 579 hekate_ipl.ini
27/05/23 20:21 19 183 patches.ini
15/06/23 22:59 234 exosphere.ini
My hekate_ipl.ini
[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0
{------ Atmosphere ------}
{Pick this option to launch CFW.}
[Atmosphere]
payload=atmosphere/fusee.bin
icon=bootloader/res/icon_payload.bmp
{ }
[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
icon=bootloader/res/icon_payload.bmp
{------ Stock ------}
{NOTE: This option does not launch CFW.}
[Stock]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp
{ }
My exosphere.ini [exosphere]
debugmode=1
debugmode_user=0
disable_user_exception_handlers=0
enable_user_pmu_access=0
blank_prodinfo_sysmmc=1
blank_prodinfo_emummc=0
allow_writing_to_cal_sysmmc=0
log_port=0
log_baud_rate=115200
log_inverted=0
My Boot0 regeneration
emmchaccgen --keys universal_prod.keys --fw FW --mariko
EmmcHaccGen started
Indexing nca files...
EmmcHaccGen will now generate firmware files using the following settings:
fw: 10.2.0
Exfat Support: True
Key path: universal_prod.keys
Destination folder: a-10.2.0_exFAT
Mariko boot generation: True
Save version: v5
AutoRCM: False
Creating folders..
Generating bis..
Wrote 0x00180000 bytes to a-10.2.0_exFAT/BOOT0.bin
Wrote 0x00080000 bytes to a-10.2.0_exFAT/BOOT1.bin
Wrote 0x00800000 bytes to a-10.2.0_exFAT/BCPKG2-1-Normal-Main.bin
Wrote 0x00800000 bytes to a-10.2.0_exFAT/BCPKG2-2-Normal-Sub.bin
Wrote 0x00800000 bytes to a-10.2.0_exFAT/BCPKG2-3-SafeMode-Main.bin
Wrote 0x00800000 bytes to a-10.2.0_exFAT/BCPKG2-4-SafeMode-Sub.bin
Wrote 0x01200025 bytes to a-10.2.0_exFAT/boot.bis
Copying files...
Setting archive bits..
Generating imkvdb..
Wrote save with an imvkdb size of 0x2C18
I can go back to SX OS I have a backup
I'm now booting on Hekate without any problem and for the moment I'm trying to chain boot to ATM.
If I try to run [Atmosphere] I end up with an error message stating after seeing the ATM splash screen for a fraction of second:
A fatal error occurred when running Fusee.
Package1 seems corrupt!
Press POWER to reboot
if I try to run [CFW - emuMMC] I end up with an error message in vertical mode stating:
Wrong pkg1 flashed:
Erista pkg1 on Mariko!
Trying backup bootloader...
Found pkg1 <' pG pG~'>.
Wrong pkg1 flashed:
Erista pkg1 on Mariko!
Failed to launch HOS!
Press any key...
I have now tried so many things that I do not know from which angle to take it and I would love to have new pair of eyes on this one.
I appreciate any advice.
Thank you
My question is very technical. If I missed any information to get some support let me know.
Thank you