Hello guys, this is my first post here! I just got a MIG Switch card out of curiosity and I was tinkering with it. For those who don't know, it's used by placing XCI dumps as well as other game specific bin files in the sd card of the MIG Switch, and are obtained from the original cartridge by using an app like nxdumptool. Two of these bin files are mandatory to get the game to boot: Initial Data.bin and Certificate.bin. They stay the same for every cartridge of a specific game. Now, if you want to use an XCI dump from a shady website it's impossible to get it to work without those files. By using the Certificate.bin from another game it has no problem, but this does not count for the Initial Data.bin. So I looked for a way to obtain this Initial Data from an XCI file and read a bit of the XCI file documentation from switchbrew dot org. Here's what I understood so far: The Switch checks if the cartridge is valid by doing a challenge–response authentication on the Initial Data. The Package ID is contained both on the XCI and the Initial Data, on positions 0x110 and 0x0 respectively. The Initial Data hash is on the XCI at position 0x160. It is calculated by doing a SHA-256 hash on the full Initial Data content. So I was wondering, is there a way to to construct a functional Initial Data file starting from an XCI dump? I also tried a reverse approach by editing the Package ID in the Initial Data from another game, generating the Initial Data hash and putting it in the XCI file but is not enough to get the Switch believe it's a real game. Sorry if this may seem stupid but let me know what you think.

duckstation for Switch

catlover007 · 2024-04-22T04:06:40+00:00

duckstation is an excellent Playstation 1 emulator by Stenzek. It has a very good compabiility and it is quite performant. It also supports all kinds of enhancements such as high resolution rendering and PGXP which can lessen the "wobble" and...

Hardware Need help finding specific motherboard part

Thread starter DijonMastered
Start date Sep 9, 2019
Views 1,116
Replies 2

DijonMastered

New Member

Newbie

Level 1

Sep 9, 2019

Edit: was solved! Part found on AliExpress

Last edited by DijonMastered, Oct 2, 2019

somebeans

Member

Newcomer

Level 1

Sep 10, 2019

Think this is it, but I have no idea for sure really. Be sure to pay extra for a non-terrible shipping option, Yanwen are glacially slow.
Can't post links but it's "/item/32976982364.html" or "/item/32979839850.html" on AliExpress

Last edited by somebeans, Sep 11, 2019

WadsRUs

Well-Known Member

Member

Level 7

Sep 11, 2019

Even if you can get the part, and bearing in mind you said that you're not experienced with soldering, I would advise that you find a professional repair shop to fix this. The connector is not only tiny but so are the pins, and the plastic housing melts relatively easily. It's definitely a job for somebody who is very experienced with doing this kind of work (and who also has the correct equipment, including a good microscope). iPhone/Smartphone repairers for example should be able to handle it, but find one that is good and reliable.

Failing that, your best bet is to sell the Switch as faulty and buy another with the funds.

Last edited by WadsRUs, Sep 11, 2019

Reactions: somebeans