Goldleaf - A Nintendo Switch multipurpose homebrew tool

LightBeam · Mar 27, 2019

I had this problem with the original tinfoil
Just had to put the auto sleep to 30 minutes, or if you don't want to do that, touch the screen in order to reset the timer

jmrodrigues · Mar 28, 2019

I cannot exit Goldtree 0.5 without getting a crash. Kosmos 11.11 (Atmosphere 0.8.5)

easycrashing · Mar 28, 2019

only .5 worked for me

xfighter11 · Mar 28, 2019

I just did a USB install of the new Yoshi with 0.5 final and it installed without a problem. Strange thing is that I needed to restart Atmo 0.8.6 after pressing home button. Remember I had the same issue last week after a SD installation with the 0.5 nightly. What can it be?

huma_dawii · Mar 28, 2019

Can we dump installed updates and DLC with this?

fst312 · Mar 28, 2019

goldtree somehow knows if a nsp is valid or something, don't remember the exact message at the end of the usb install but goldtree said it couldn't open nsp file are you sure nsp is correct, it said something like that. I installed Yoshi which was a converted xci to nsp file, is this normal because the game still installed and seems to work properly.

--------------------- MERGED ---------------------------

xfighter11 said:
I just did a USB install of the new Yoshi with 0.5 final and it installed without a problem. Strange thing is that I needed to restart Atmo 0.8.6 after pressing home button. Remember I had the same issue last week after a SD installation with the 0.5 nightly. What can it be?

same thing happened to me, maybe it's that error at the end of the usb install that caused it, not sure if you got that invalid nsp thing too.

Adran_Marit · Mar 28, 2019

fst312 said:
goldtree somehow knows if a nsp is valid or something, don't remember the exact message at the end of the usb install but goldtree said it couldn't open nsp file are you sure nsp is correct, it said something like that. I installed Yoshi which was a converted xci to nsp file, is this normal because the game still installed and seems to work properly.

--------------------- MERGED ---------------------------

same thing happened to me, maybe it's that error at the end of the usb install that caused it, not sure if you got that invalid nsp thing too.

odd, I don't remember seeing any errors when I installed it this morning using the 0.5 release

LapCheong · Mar 28, 2019

Strange stuff

Managed to install a game just fine using the latest goldtree and goldleaf (average 20mb/s)
Following that i install the DLC of the game, i got stuck at transfering (0mb/s) after a few minutes i plug the cable
I uninstall the DLC and try to install again, but this time the process completed almost instantly (DLC file is about 350mb)
As expected the installation is corrupted, remove both game and dlc then sub sequence installation completed instantly

Fall back to OG tinfoil and NS-USBloader for good measure before redownloading the nsp, surprisingly it installed and game starts.

Anyone experiencing this?

AMS 0.8.6 Kosmos 11.11.1 OFW6.2

fst312 · Mar 28, 2019

Adran_Marit said:
odd, I don't remember seeing any errors when I installed it this morning using the 0.5 release

Just noticed the Goldleaf version I have is still 0.4, might reinstall later but the game did install. I still got the atmosphere error, not sure if you got that too.

Adran_Marit · Mar 28, 2019

fst312 said:
Just noticed the Goldleaf version I have is still 0.4, might reinstall later but the game did install. I still got the atmosphere error, not sure if you got that too.

yeah version 0.4 is a buggy mess XD

Atmosphere error? Did you do a bug report for it?

--------------------- MERGED ---------------------------

LapCheong said:
Strange stuff

Managed to install a game just fine using the latest goldtree and goldleaf (average 20mb/s)
Following that i install the DLC of the game, i got stuck at transfering (0mb/s) after a few minutes i plug the cable
I uninstall the DLC and try to install again, but this time the process completed almost instantly (DLC file is about 350mb)
As expected the installation is corrupted, remove both game and dlc then sub sequence installation completed instantly

Fall back to OG tinfoil and NS-USBloader for good measure before redownloading the nsp, surprisingly it installed and game starts.

Anyone experiencing this?

AMS 0.8.6 Kosmos 11.11.1 OFW6.2

Make a bug report on the github

LapCheong · Mar 28, 2019

Adran_Marit said:
yeah version 0.4 is a buggy mess XD

Atmosphere error? Did you do a bug report for it?

--------------------- MERGED ---------------------------

Make a bug report on the github

Well i uninstall the game and try to install again for safe measure before posting it as a bug. It works as expected now, i am going crazy now!

hippy dave · Mar 28, 2019

JJTapia19 said:
@XorTroll The switch goes to sleep during title installation and messes everything up I had to find the title id and delete it's ticket to be able to reinstall it.

You can turn off auto sleep in system settings for now. @XorTroll should be able to disable it just while goldleaf is installing tho (at some point I bookmarked this commit of pplay as an example of preventing sleep...)

Dothackjhe · Mar 28, 2019

Is the SD Installation already fixed yet with Goldleaf 0.5 for ReiNX on firmware 7.0/7.0.1?

Adran_Marit · Mar 28, 2019

Dothackjhe said:
Is the SD Installation already fixed yet with Goldleaf 0.5 for ReiNX on firmware 7.0/7.0.1?

yes, that was fixed in this latest release ( 0.5)

Deleted User · Mar 28, 2019

@hippy dave what transfer speed you get on USB with V5 I am getting 16mbps compared to TF where I get 25-30mbps

Dothackjhe · Mar 28, 2019

Adran_Marit said:
yes, that was fixed in this latest release ( 0.5)

Great, thanks.

LapCheong · Mar 28, 2019

Dragonx41 said:
@hippy dave what transfer speed you get on USB with V5 I am getting 16mbps compared to TF where I get 25-30mbps

Ya i am seeing that as well. But is average speed though, maybe the calculation is wrong?

Deleted User · Mar 28, 2019

LapCheong said:
Ya i am seeing that as well. But is average speed though, maybe the calculation is wrong?

I transferred a 3.93GB NSP last night through USB it stayed at constant 16MB. Yet on a non gui connecter like TF it's faster is it the GUI that creating an overhead or is the usb side not optimized yet I saw the same speed on V3 as well.

LapCheong · Mar 28, 2019

Dragonx41 said:
I transferred a 3.93GB NSP last night through USB it stayed at constant 16MB. Yet on a non gui connecter like TF it's faster is it the GUI that creating an overhead or is the usb side not optimized yet I saw the same speed on V3 as well.

I just did a installation with goldleaf 0.5 and NS-USBloader 0.4 instead of goldtree having the same speed as well around 15MB/s Maybe it got something to do with you the USB transfer protocol in goldleaf 0.5

PS Tried with USB A to Type C USB 2.0 and type c to type c 3.0

Deleted User · Mar 28, 2019

LapCheong said:
I just did a installation with goldleaf 0.5 and NS-USBloader 0.4 instead of goldtree having the same speed as well around 15MB/s Maybe it got something to do with you the USB transfer protocol in goldleaf 0.5

That's the setup I am using with AMS 8.6

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Walküre's Hacker

Well-Known Member

Well-Known Member

Walküre's Hacker

Well-Known Member

BBMB

"Joker"

Walküre's Hacker

Deleted User

Guest

"Joker"

Well-Known Member

Deleted User

Guest

Well-Known Member

Deleted User

Guest

Similar threads

Popular threads in this forum