Using a 4GB Toshiba MicroSD in two flash drives. MSD is formatted to FAT32. I have files and directories on that drive and LaunchELF on FreeMcBoot does not see anything on it when clearly there is. What do I need to do now?
PS1/2 LaunchELF won’t detect Thumbdrive
- Thread starter skydancer93
- Start date
- Views 15,269
- Replies 6
If I remember right, that size drive should be formatted as FAT. Also, what version launchELF are you using?
No. You can change drives. You just need to back out to the main directory selection and change the drive there. Then open the mass0:/. At least that’s how it is with the ulaunchelf version I have. It’s wlaunchelf.
Mine is the good ol' ulaunchelf. Whenever i plug in my usb stick and launch it, it will sometimes not read it or its there but just empty (mass0). So i unplug it, wait 3-5 seconds then plug it back in. Presto, its there.
Btw, is wlaunchelf better?
not totally better. wlaunchelf is more recent and had been worked on for better ftp experience. some apps (snestation) dont work well. i still have ulaunchelf 4.42e
Just try a different USB drive/microSD card. When I tried installing CFW on my PS3 through PS3Xploit it simply refused to work, even though I formatted the USB correctly and it was in the right port. So I tried a different USB drive and BOOM! It worked. Strangely enough that very same USB drive that refused to work on my PS3 actually works on my PS2.
Similar threads
-
-
-
-
-
-
-
-
-
-
-
-
@
NinStar:
I bought a pair of joy cons for really cheap, but the right side wasn't being detected by the console when attached to it, it was charging though -
@
NinStar:
I took a look at the rail and noticed that the two last pins were soldered for some reason, luckly I still had the rail of my broken joycon so after I swapped them I was able to use it attached to the console
-
@
NinStar:
I'm pretty sure I know the reason it was soldered, but I don't know why someone would do that directly on the joycon
-
-
-
-
-
-
-
-
-
-
-
