Try the modified files Aurora uploaded two pages back. That drastically increased my boot rate (although I boot directly into this, rather than using a boot manager).but the boot rate is horrible with ctrbootmanager it boot 1 time on 6 times i test how to fix ?
you could try making the timeout value higher. Also while it's mainly a personal thing, I have noticed to get better success rates when references a .3dsx file the rate is much better than when referencing a .dat file for reinand or code.bin (i think) for rxtools with the offset. The .3dsx will commonly have the paths:but the boot rate is horrible with ctrbootmanager it boot 1 time on 6 times i test how to fix ?
/3ds/rxTools/rxTools.3dsx
/3ds/ReiNand/ReiNand.3dsx
thank you the new 3dsx work greatTry the modified files Aurora uploaded two pages back. That drastically increased my boot rate (although I boot directly into this, rather than using a boot manager).
No, I removed it on purpose. If you need to tell apart emu and sysnand just set a different theme!one feature request!
can we have that feature which says "ReiNAND MOD version X.X.X" in settings
Hold A on boot: I just tested my DSTWO and original Pokemon White 2. On O3DS, as I said in the OP, it's either large RAM games or GBA and DS mode.Is there a way to get DS carts working on O3DS? I used the whitelist mod and still no go for my DSTWO. Works fine on my N3DS with the regular Reinand 3.2b, just not my old 3ds with reinandmod.
Hold A on boot: I just tested my DSTWO and original Pokemon White 2. On O3DS, as I said in the OP, it's either large RAM games or GBA and DS mode.
May I please request an option to reverse this function? I own a lot of DS games, but not a single large-RAM 3DS game, and when booting through CtrBoot the button-press doesn't always register, and I am probably not the only one with this problem.Hold A on boot: I just tested my DSTWO and original Pokemon White 2. On O3DS, as I said in the OP, it's either large RAM games or GBA and DS mode.
1. Yes, just make sure to update your reiNAND.So I'm kinda in the unknown about reinand in general, and I'm aware this is a mod, but I have two questions.
1.) Does this allow for updates to 10.5? The OP only states 10.4 is supported.
2.) Would updating from 9.2 to 10.5 on n3DS enable Amiibo support?
Sorry if these are dumb questions or they've been asked tons of times. ;_;
I have Reinand... 2.1 installed, and I know that's quite old. If that helps any.
Thanks, I went ahead and did all that and it worked perfectly! I appreciate the help a ton. <31. Yes, just make sure to update your reiNAND.
2. If you mean your emuNAND, then it should. I don't have any amiibos to try it out, but it should work.
I don't think that the "button press doesn't register" (as it's read from the HID registers directly, and I think those are read only), but rather that, if you use a button to launch it from a boot manager, it's hard to do the timing to have *only* A pressed. I hadn't thought of this, honestly! (As I autoboot it with no buttons pressed).May I please request an option to reverse this function? I own a lot of DS games, but not a single large-RAM 3DS game, and when booting through CtrBoot the button-press doesn't always register, and I am probably not the only one with this problem.
N3DS users do not need to do that, right? This is only for O3DS users?I don't think that the "button press doesn't register" (as it's read from the HID registers directly, and I think those are read only), but rather that, if you use a button to launch it from a boot manager, it's hard to do the timing to have *only* A pressed. I hadn't thought of this, honestly! (As I autoboot it with no buttons pressed).
So the new release does this: the button presses don't need to be the *only ones* anymore (instead of, say, L+R, you can hold L+R+another button used to launch this from the boot manager, and it'll be the same).
Other than this, I made it possible to reverse the reboot patch behavior as you asked. It's necessary to create a non-empty "/rei/reversereboot.bin" file, then the patch will be off by default and will be enabled with A.
Yes.N3DS users do not need to do that, right? This is only for O3DS users?
We have both AGB/TWL along with booting games like Smash and MH by default?
N3DS does not reboot FIRM when you boot large RAM games (it has double the amount of RAM), so the reboot patch is not needed.N3DS users do not need to do that, right? This is only for O3DS users?
We have both AGB/TWL along with booting games like Smash and MH by default?
On a side note, have you considered adding Region free to the MOD?
This would require patching the Home menu or something like that... This doesn't get anywhere near that, it just patches the FIRM and then boots it (then everything else is loaded by it automatically).I have no idea how difficult the coding would be, but is it possible to add the option of auto executing a .cia on startup from AuReiNAND? Where you could maybe pass it as an option when loading from a boot manager or something of the sort.
The boot.3dsx is for people who don't want to use BootCtr or CtrBootManager, those allow you to set a delay, but the regular ReiNand 3dsx doesn't have a delay and thus works bad with menuhax.I have ctrbootmanager and currently auto boot to the .dat file, should I change it to the .3dsx? Is there a difference? If so what?