Toggle sidebar

Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 6,087,638
  • Replies Replies 47,937
  • Likes Likes 66
Hayato213 said:
Well if your port doesn't work you will have to fix it since you ain't able to charge. But based on what you provided so far it point to that power management chip i mentioned
Click to expand...
Im pretty sure it’s the charging port. Second opinion?
 

Attachments

  • image.jpg
    image.jpg
    1.7 MB · Views: 29
shoawnestswager said:
I know. I assume this means it’s the charging port at fault for the 2101-0001 error. Do you agree? I just really want to make sure I have the right part before opening the switch up.
Click to expand...

The error point at the power management chip, I mean the port probably needs a replacement too, unless you can get it back to how it supposed to be. It depends on if any of the part of charging port are damaged or not.
 
Blauhasenpopo said:
Hello Folks :)

Is there a complete guide from 0 to hekate,atmosphere, syspatch, lockpick ....etc.?

THX in advance
Click to expand...
impeeza

Homebrew Tutorial  Thread 'Ultimate guide to upgrade your firmware/Atmosphère'

ONLY UPDATE YOUR CONSOLE TO 2x.x.x IF ALL THE HOMEBREW YOU USE IS UPGRADED




Sometimes you need to upgrade your console, upgrade the firmware or upgrade Atmosphère, using the @l7777 's guide (https://gbatemp.net/threads/updating-hekate-atmosphere-and-hos.631739/) as base I hope to create a list of necessary steps to successful upgrade your console.

This guide uses Hekate, if you don't want to use Hekate skip the steps about it. You may loose some features.




Make a backup.​

Always make a full backup of your console, so if...​

  • Like
  • Love
  • Wow
 
  • Like
Reactions: Blauhasenpopo
hi im trying to install dlcs on dbi i just drag and drop the dlc files in using the MTP responder method but it doesnt seem to install the dlcs can i get some help?
 
After some digging, I found every method for bypassing supernag to be outdated (Gag Order, switch-sys-tweak), and some other method here:

D

Hardware  Post in thread 'Is there a way to remove the "a software update is required" nag without updating?'

OK. Found a way to remove nag, that even Reset required version can not remove:
1. Mount SYSTEM via hacdiscmount
2. Open /save/8000000000000045 via hexeditor
3. Find titleid for update (8 bytes) and zero next 8 bytes.
  • Like

Does any workaround work on 20.3.0? Pretty sure it's a supernag considering there is no pending update.
 
lightwo said:
After some digging, I found every method for bypassing supernag to be outdated (Gag Order, switch-sys-tweak), and some other method here:

D

Hardware  Post in thread 'Is there a way to remove the "a software update is required" nag without updating?'

OK. Found a way to remove nag, that even Reset required version can not remove:
1. Mount SYSTEM via hacdiscmount
2. Open /save/8000000000000045 via hexeditor
3. Find titleid for update (8 bytes) and zero next 8 bytes.
  • Like

Does any workaround work on 20.3.0? Pretty sure it's a supernag considering there is no pending update.
Click to expand...

Just set up exosphere and I guess update your firmware to like 20.5.0 if you don't want to go to 21.x.x and you won't get nag.
 
Hayato213 said:
Just set up exosphere and I guess update your firmware to like 20.5.0 if you don't want to go to 21.x.x and you won't get nag.
Click to expand...
What do you mean by Exosphere? DNS MITM is already set up, there isn't much else I'm aware of that can be configured about Exosphere that's relevant here.

Are you saying a system update to any version does the trick? As in, using Daybreak to install 20.5.0 will clear the nag?
 
lightwo said:
What do you mean by Exosphere? DNS MITM is already set up, there isn't much else I'm aware of that can be configured about Exosphere that's relevant here.

Are you saying a system update to any version does the trick? As in, using Daybreak to install 20.5.0 will clear the nag?
Click to expand...

If you have setup server communication block like with exosphere you can prevent the nag, since your serial number is blanked out, so it doesn't nag you about games update and firmware update, well you have to use both.

You should setup incognito (nowadays known as Exosphere), its a setting that blanks your console serial number while atmosphere is running (so you dont get a console ban). DNS MITM is a DNS resolver built into atmosphere that blocks internet traffic to nintendo servers.
 
Hayato213 said:
If you have setup server communication block like with exosphere you can prevent the nag, since your serial number is blanked out, so it doesn't nag you about games update and firmware update, well you have to use both.

You should setup incognito (nowadays known as Exosphere), its a setting that blanks your console serial number while atmosphere is running (so you dont get a console ban). DNS MITM is a DNS resolver built into atmosphere that blocks internet traffic to nintendo servers.
Click to expand...
All of these are set up. Why does the nag still occur? It's clearly a supernag, the system update dialogue has 2 options when attempting to open the browser.
 
lightwo said:
All of these are set up. Why does the nag still occur? It's clearly a supernag, the system update dialogue has 2 options.
Click to expand...

If you set it up after the the system know there is an update it is too late, you need to have it up and running when you update the firmware.
 
Hayato213 said:
If you set it up after the the system know there is an update it is too late, you need to have it up and running when you update the firmware.
Click to expand...
So is there no workaround on 20.4.0? In what situations does your earlier suggestion work:

Hayato213 said:
Just set up exosphere and I guess update your firmware to like 20.5.0 if you don't want to go to 21.x.x and you won't get nag.
Click to expand...
 
lightwo said:
So is there no workaround on 20.4.0? In what situations does your earlier suggestion work:
Click to expand...

You can use any firmware above your current firmware.
Post automatically merged:

itsyokoi said:
hi im trying to install dlcs on dbi i just drag and drop the dlc files in using the MTP responder method but it doesnt seem to install the dlcs can i get some help?
Click to expand...

Does your switch show up on your computer like this?

1770404750277.png
 
Last edited by Hayato213,

Site & Scene News

Go to forum More news

Popular threads in this forum

Homebrew Homebrew game  Chrono Trigger - Switch port

Emulation Homebrew PS1/2 Emulator  ARMSX2-NX Initial Release

Emulation Emulator  NetherSX2 - Switch Port

Hacking Homebrew Tutorial  New Switch Modpack, NX-ModPack

Homebrew Homebrew game  Final Fantasy IV 3D Remake - Switch port

Homebrew Homebrew game  Castlevania Symphony of the Night - Switch port

Dekopon - (Mostly) Fullspeed 3DS Emulation on Nintendo Switch

Homebrew Homebrew game  GTA: Liberty City Stories - Switch port