So continue from my previous thread, I did manage to get D2B Disc drive, I got me some PIC 16F630/676 bought a PIC programmer , I read the Microcontroller Factory Oscal value (342C) then i put the YAOSM hex file (Yaosm_16f630/676 D2B.hex) the file changed my oscal value from 342C bandgap 00, to 3FFF bandgap 01, so i changed it back to 342C bandgap 00, and verified my program,
I soldered my PIC to the Disc drive,
I followed sthetix guide which is getting the Original Mario kart wii (usa) with MD5 hash exactly as his in the video
And getting the super smash bros brawl (PAL) which is also the same as his md5 hash in the video, Used his PAWNS to creat Disc1&Disc2
And i burned disc1 (mario kart wii) into DVD+RW 4.7Gb Imation, and disc2 (SSBB) into DVD+R 8.5Gb Dual layer Imation
Now everything is read
Aaaaaand
Nothing happened,
The disc1 is spinning for 2 seconds and stops spinning and never spin again or any other disc until i turn off the device and turned it on again,
As for Disc2 dual layer, when i put it it started to spin like it's reading, but it never stops and nothing pops up in the screen,
I noticed the same exact behaviour when i de solder the Modchip, same thing, so I don't know what is the problem is it the DVD+RW? Is it Modchip? Is it the programming?, i cleaned the laser and nothing happens, I'll try to buy new DVD+R instead of DVD+RW and see what happens, and I'll try 16F676 without changing the osccal value, and I'll try to replace the laser as last resort, I'll keep you updated, if there's anything you can help me with please share as i spent last 3 months gathering and Search
I soldered my PIC to the Disc drive,
I followed sthetix guide which is getting the Original Mario kart wii (usa) with MD5 hash exactly as his in the video
And getting the super smash bros brawl (PAL) which is also the same as his md5 hash in the video, Used his PAWNS to creat Disc1&Disc2
And i burned disc1 (mario kart wii) into DVD+RW 4.7Gb Imation, and disc2 (SSBB) into DVD+R 8.5Gb Dual layer Imation
Now everything is read
Aaaaaand
Nothing happened,
The disc1 is spinning for 2 seconds and stops spinning and never spin again or any other disc until i turn off the device and turned it on again,
As for Disc2 dual layer, when i put it it started to spin like it's reading, but it never stops and nothing pops up in the screen,
I noticed the same exact behaviour when i de solder the Modchip, same thing, so I don't know what is the problem is it the DVD+RW? Is it Modchip? Is it the programming?, i cleaned the laser and nothing happens, I'll try to buy new DVD+R instead of DVD+RW and see what happens, and I'll try 16F676 without changing the osccal value, and I'll try to replace the laser as last resort, I'll keep you updated, if there's anything you can help me with please share as i spent last 3 months gathering and Search
