Help! (Is this *= or == on the video) Is the issue on the emmc, cpu solder or the picofly?
Video on attachment or here:
How I ended up here:
1. At first I was able to reach “no sd” and hekate with no issue
2. I partitioned my sd card through hekate for emummc
3. When I am creating the emummc it got stuck at 29% and the screen freezes
4. Removed the battery to reset the switch when I turn it on again I got blue screen with “=*=“ on the picofly
5. I tried reflashing the picofly and this is the current behavior (on the video, black screen)
Current diode info:
Ground:motherboard
CLK(D) & RST(B) on picofly with emmc attached ~0.8
CLK & RST on the motherboard ~0.8
SP1 left 0.3 - right 13.3
SP2 left 13.5 - right 0.3
no shots visible on the other capacitor
Any help is greatly appreciated
Video on attachment or here:
How I ended up here:
1. At first I was able to reach “no sd” and hekate with no issue
2. I partitioned my sd card through hekate for emummc
3. When I am creating the emummc it got stuck at 29% and the screen freezes
4. Removed the battery to reset the switch when I turn it on again I got blue screen with “=*=“ on the picofly
5. I tried reflashing the picofly and this is the current behavior (on the video, black screen)
Current diode info:
Ground:motherboard
CLK(D) & RST(B) on picofly with emmc attached ~0.8
CLK & RST on the motherboard ~0.8
SP1 left 0.3 - right 13.3
SP2 left 13.5 - right 0.3
no shots visible on the other capacitor
Any help is greatly appreciated