Hacking SWITCH NOOB PARADISE - Ask questions here

[Zap2000]

im moving from atmosphere from sx os what type of wire do i need to inject payload?

im only just to using sx pro dongle would that be easy to use?

 

[binkinator]

im moving from atmosphere from sx os what type of wire do i need to inject payload?

im only just to using sx pro dongle would that be easy to use?

you can use your current SX Injector. No need to buy anything else.

https://rentry.org/mys8q

 

[JayBae]

Dumb question... but WTF is a "Kip" ???

Trying to figure out how to use this. Xor.play

But I have no idea what is / how to make a "kip".

 

[impeeza]

So I followed this RCM Loader Guide HERE in this video and I got all the Atmosphere and Hekate payload bin files copied across. Hekate is in the ATMOSPHERE folder and Atmosphere (fusee.bin) is currently in the USER1 profile. According to this guide in the image below, the yellow light indicates the USER1 profile.

The issue I'm having is cycling through each LED / Folder name. The instructions set the following:

How to show current payload:
Click the button + to show the current payload (LED flash twice).

// When I do this, it currently shows the Blue LED Colour

How to change build-in payload :
Hold the button + to jump to the next payload (LED flash 4 times).

// When I do this, it currently shows the Green LED Colour

For whatever reason though, I'm unable to cycle through LED/Folders. It seems to be stuck on Blue and refuses to the next colour on the list which should be Red.

Am I doing something wrong? The device was fully charged overnight and should be working fine.

It seems some clones arround there can only load the blue profile, for me was stucked on that until I dumbly format the drive and copy a new set of files but the RCM loader never works again, even I did try to reflash the firmware but no luck, it never come back, contacted the seller and refused to change, amazon refund me. when I manage to contact RCMLoader support team, they inform me what my RCM was a cloned one and have no support.

I only was able to get a R4s which also only can inject a payload but in a extrange format, so I did opted to use ArgonNX, https://github.com/Guillem96/argon-nx/releases. Is a payload which load any file named SD:/argon/payload.bin on your SD card, or can show a menu to select and load any .bin files on your SD:/argon/payloads/ folder. so you don't need to update your paylad on the injector only a file on your SD Card.


For me was:

Injector: ArgonNX
ArgonNX: auto load Hekate
Hekate: load atmosphere/package3

and only add 1 second of delay if I inject Atmosphére directly. with the plus of having Hekate & Nyx and for the next updates do not need to touch my injector.

 

[impeeza]

Dumb question... but WTF is a "Kip" ???

Trying to figure out how to use this. Xor.play

But I have no idea what is / how to make a "kip".

Kips are file used to patch the firmware, are loaded by hekate and/or atmosphere. by example in order to Mission Controll change the Bluetooth module of HOS it needs you apply some Kips patches to your firmware. Changing the boot logo image also is a Kip file.

 

[binkinator]

Dumb question... but WTF is a "Kip" ???

Trying to figure out how to use this. Xor.play

But I have no idea what is / how to make a "kip".

Kips are Kernel Initial Procs. They are powerful kernel level modules that require a reboot to put in place. They are the precursor to todays sys modules that can be loaded and unloaded and have to have declared permissions vs kernel level (admin/root) access. You might have some already under /atmosphere/kip_patches

 

[binkinator]

It seems some clones arround there can only load the blue profile, for me was stucked on that until I dumbly format the drive and copy a new set of files but the RCM loader never works again, even I did try to reflash the firmware but no luck, it never come back, contacted the seller and refused to change, amazon refund me. when I manage to contact RCMLoader support team, they inform me what my RCM was a cloned one and have no support.

I only was able to get a R4s which also only can inject a payload but in a extrange format, so I did opted to use ArgonNX, https://github.com/Guillem96/argon-nx/releases. Is a payload which load any file named SD:/argon/payload.bin on your SD card, or can show a menu to select and load any .bin files on your SD:/argon/payloads/ folder. so you don't need to update your paylad on the injector only a file on your SD Card.


For me was:

Injector: ArgonNX
ArgonNX: auto load Hekate
Hekate: load atmosphere/package3

and only add 1 second of delay if I inject Atmosphére directly. with the plus of having Hekate & Nyx and for the next updates do not need to touch my injector.

When I installed my Trinket M0 I made it chain load directly to ArgonNX. I usually skip over telling people I have Argon in my stack as part of my dual boot of SXOS and Hekate/Atmosphere…mostly cause it confuses people. It barely adds any time to the boot process and helps with troubleshooting cause it‘s stable and dead simple. Glad to see another Argon user here!

 

[Zap2000]

you can use your current SX Injector. No need to buy anything else.

https://rentry.org/mys8q

it says note (Mariko Users Only):?​

 

[binkinator]

it says note (Mariko Users Only):?​

correct…that page of for both Erista AND Mariko. if you are using Mariko do NOT do what’s in that section. if you are using Mariko then you have an extra step to do. Erista users should go straight into the Migration.

 

[Zap2000]

correct…that page of for both Erista AND Mariko. if you are using Mariko do NOT do what’s in that section. if you are using Mariko then you have an extra step to do. Erista users should go straight into the Migration.

im confused im Erista user but i tryed to do a fresh install on new memory card now cant start CFW?

 

[Draxzelex]

im confused im Erista user but i tryed to do a fresh install on new memory card now cant start CFW?

Here is a guide that might be more your speed.

 

[Zap2000]

Here is a guide that might be more your speed.

but im trying to get rid of sx os and move fully to atrmsphere should i get a new way to send payload or can it be down with my sx dongle?

 

[Zap2000]

i cant load hekate from using my sx dongle i have followed this guide
https://rentry.org/mys8q

is there another method for me to try?

 

[Zap2000]

or do i just need new cable??

 

[binkinator]

i cant load hekate from using my sx dongle i have followed this guide
https://rentry.org/mys8q

is there another method for me to try?

What errors did you see along the way? Please describe in detail each thing that happened so we can understand what you are seeing.

or do i just need new cable??

Hard to tell if we don‘t have details on where you got stuck.

What type of cable are you using at the moment?

 

[binkinator]

Here is a guide that might be more your speed.

I see what you did there. This is pretty much plug and play. I like it.

 

[DictatorZero]

I think you mean this: https://fortheusers.org/

if so, here’s the release: https://github.com/fortheusers/hb-appstore

Thank you.

 

[strangeone1969]

I am having an issue, for some reason I cannot remember where to put my cheat files. I have atmosphere 1.2.6 with HBL 2.4.1 and hbmenu 3.5.0. I am using Breeze to use the cheat files. I am not sure if I am to put the cheat files in the Atmosphere folder or in Breeze. I had been fine until I updated a game I was playing as a small update with extra content was released. I downloaded the new cheats and I think I put them in the wrong folder as they do not show up, and neither do the old cheats now.

 

[switchboi69]

Using NXNandMananger and HackDiskMount for this.

Hey - i was reading that the file that contains the users is on the SYSTEM partition in the saves folder and is called 8000000000000010.
My old emunand was on fw version 10.0.4 - the new emunand is 10.0.2. I copied over the file to the new emunand SYSTEM saves folder but now i'm stuck at the Splash Screen which shows "NINTENDO SWITCH". Could it be because of the different firmware versions or did i do something fundamentally wrong?

Would love to get help on this because i had loooooads of saves on my user that i don't want to lose. ( I already transfered the savefiles in the same fashion like i did with the userfile but in the USER partition.

Actually i updated the Emunand to 10.0.4 but came to the same never ending NINTENDO SWITCH splash.

edit: I actually need to use PC tools to do this because my old SD card doesn'T work on my switch anymore. ( i had to send it in because the sd card reader was broken - nintendo replaced the whole motherboard to an erista patched one which couldn't be jailbroken without a modchip. Got an sx core and flashed it with spacecraft-nx. When i try to import my old emunand backup as soon as i get to the splash from atmosphere the switch goes black and doesn't continue. So there is no easy way for me to import my old stuff.

nobody knows how to do this?

 

[binkinator]

nobody knows how to do this?

Yeah man, this is some pretty unique edge case ish you don’t run into every day (and I hope I never do to be honest.)

I do wish you the best in your research!