Hacking SWITCH NOOB PARADISE - Ask questions here

[goamn]

The Switch stopped working with CFW because the Switch's system version was updated to 12.x. You need to update Hekate and Atmosphere in order to get CFW working again. You can also reinstall AutoRCM using Hekate.

• Hekate: github CTCaer/hekate/releases/latest
• Atmosphere: github Atmosphere-NX/Atmosphere/releases/latest
• Signature patches: github ITotalJustice/patches/releases/latest

Thanks for the help, I've updated everything with all those links for the SD card. How do I update the USB/RCMloader?

Also I can't see any Hekate screens after disabling the AutoCRM, how do I get back to that screen? Do I have to use some hardware pins/paperclips? Is there a PC alternative?

 

[Lacius]

Thanks for the help, I've updated everything with all those links for the SD card. How do I update the USB/RCMloader?

Also I can't see any Hekate screens after disabling the AutoCRM, how do I get back to that screen? Do I have to use some hardware pins/paperclips? Is there a PC alternative?

You have to enter RCM using a jig of some sort (like a paperclip), and you have to load Hekate or another payload using either a USB connection to a computer or a USB dongle. Once you're back in Hekate, you can reinstall AutoRCM.

How you update your USB dongle depends on which one you have. However, these dongles aren't meant to have to be updated. If you have been using Hekate, then you can rename the latest Hekate bin as "update.bin" and put it in the bootloader folder on your SD card. By doing this, the USB dongle (if it has Hekate on it) will load the updated version on the SD card.

 

[goamn]

You have to enter RCM using a jig of some sort (like a paperclip), and you have to load Hekate or another payload using either a USB connection to a computer or a USB dongle. Once you're back in Hekate, you can reinstall AutoRCM.

How you update your USB dongle depends on which one you have. However, these dongles aren't meant to have to be updated. If you have been using Hekate, then you can rename the latest Hekate bin as "update.bin" and put it in the bootloader folder on your SD card. By doing this, the USB dongle (if it has Hekate on it) will load the updated version on the SD card.

Thanks for the help! It's up and running now. I realised that I had a custom jig piggy-backed on my RCMloader but didn't realise it until I was staring at it on a webpage . I was getting an error as the RCMloader was now outdated so I realised what to do after reading another post to update it:
"then connect it to your pc, and replace the payload.bin in the atmosphere folder with the latest fusee-primary (rename to payload.bin)"
Also, getting it to load from atmosphere/hekate required the "blue light", which was explained inside the Readme file on the RCMloader, had to fiddle around on it to get it to work. Then I finally turned AutoRCM back on and sent the new payload and all seems to be working fine.

 

[Deleted member 475203]

what are chances as of now to softmod a switch lite? i mean whats the progress on that field?

 

[Lacius]

what are chances as of now to softmod a switch lite? i mean whats the progress on that field?

There has been zero progress, and you shouldn't exact any anytime soon. If you want to hack your Switch, get an exploitable model or install a TX modchip.

 

[Deleted member 475203]

Are all switch Lite consoles Mariko revisions? If so, does that mean that they are more efficient with power consumption thus using less battery?

--------------------- MERGED ---------------------------

There has been zero progress, and you shouldn't exact any anytime soon. If you want to hack your Switch, get an exploitable model or install a TX modchip.

i dont, im just curious whats happening on the scene.
Is there anyone trying to hack it, anywhere to watch the progress, updatres?

 

[stefanbk]

You appear to have a few misunderstandings about CFW. First, CFW are just files on your SD card; CFW is never installed to the system. Therefore updating CFW is as simple as updating the files on your SD card. But when it comes to updating the files, it is better to remove the old files and folders first before placing the new ones because simply overwriting them won't remove outdated files/folders. Secondly, since CFW are just files on your SD card, it has no effect on save data which is stored within the console. Thirdly, and this is moreso for your own knowledge, your eMMC backup is in case your console gets bricked or has another issue that cannot be resolved by other means.

Haku33 is a homebrew program that artificially "cleans" the console but since it is done artificially, it is not foolproof. In fact, someone has already been banned after using it.

hey, I think I somehow found my original prod.key from my old nand that I lost. Is there an option to use them?(to get a "cleaner" nand)

 

[Lacius]

Are all switch Lite consoles Mariko revisions? If so, does that mean that they are more efficient with power consumption thus using less battery?

--------------------- MERGED ---------------------------


i dont, im just curious whats happening on the scene.
Is there anyone trying to hack it, anywhere to watch the progress, updatres?

You can find what you're looking for here:
https://switchbrew.org/wiki/Switch_System_Flaws

Nobody has had any success with newer hardware revisions. Hardware exploits haven't been discovered, and the OS is extremely secure. Don't hold your breath waiting for something that isn't a hardware modification like the TX modchip.

 

[Deleted member 475203]

You can find what you're looking for here:
https://switchbrew.org/wiki/Switch_System_Flaws

Nobody has had any success with newer hardware revisions. Hardware exploits haven't been discovered, and the OS is extremely secure. Don't hold your breath waiting for something that isn't a hardware modification like the TX modchip.

Thanks!

I'm not, i play legit anyway, but They said the same thing for Vita.
I'm just curious, its interesting thing to follow.

 

[namad]

Is there a tesla overlay to display framerate? (I'm trying to see if a game is running better or worse, and realized that just eyeballing it is probably not the best way?)

In case this question somehow needs additional context, I explained here:

https://gbatemp.net/threads/disgaea...ease-share-your-overclocking-settings.591063/

of course it works, but it'd be nice to see some numerical proof (and if I had numerical proof I could twiddle the settings around bit by bit to find some sort of "sweet spot". Rather than just making a guess and saying okie dokie that's where I'll leave it.

Although this topic does slightly relate to what "MetoMeto" was asking, if you want better battery life you could always just use an original switch and underclock it (which if you're playing something extremely undemanding would in theory work just fine, yes?)

 

[Bigsneks]

hiiii, I just updated to the newest fw and suddenly arcadia just doesn't detect a config file anymore, I launch Smash over and over so it can write one but it just does nothing... my SD card even has an arcadia ini file but it just doesnt seem to notice it?

 

[LowScore]

EDIT - question has been moved to Switch - Exploits, Custom Firmwares & Soft Mods section

 

[Draxzelex]

hey, I think I somehow found my original prod.key from my old nand that I lost. Is there an option to use them?(to get a "cleaner" nand)

It is impossible to recreate a clean eMMC backup. Keys will not help.

Is there a tesla overlay to display framerate? (I'm trying to see if a game is running better or worse, and realized that just eyeballing it is probably not the best way?)

In case this question somehow needs additional context, I explained here:

https://gbatemp.net/threads/disgaea...ease-share-your-overclocking-settings.591063/

of course it works, but it'd be nice to see some numerical proof (and if I had numerical proof I could twiddle the settings around bit by bit to find some sort of "sweet spot". Rather than just making a guess and saying okie dokie that's where I'll leave it.

Although this topic does slightly relate to what "MetoMeto" was asking, if you want better battery life you could always just use an original switch and underclock it (which if you're playing something extremely undemanding would in theory work just fine, yes?)

https://gbatemp.net/threads/status-monitor-overlay-tesla-overlay-to-monitor-your-hardware.558505/

hiiii, I just updated to the newest fw and suddenly arcadia just doesn't detect a config file anymore, I launch Smash over and over so it can write one but it just does nothing... my SD card even has an arcadia ini file but it just doesnt seem to notice it?

How is your SD card formatted?

 

[akira022]

is it possible for 90dns/pegascape to cause the switch to not connect? I use pegascape dns but the switch says it cannot resolve. I put them into my phone(where my switch usually connects to) browser they load up just fine. Just trying to boot my switch...lol

 

[Gorkensnorkel]

Eh, it's update time again for my Switch so here I am. I have all the relevant files downloaded (12.1.0 firmware, new CFW zip from sdsetup.com, etc) but I just like to ask first... is it safe to update to 12.1.0 firmware? Has it been long enough that Atmosphere and other CFW have been updated?

Are the Sigpatches working ok with the latest firmware update?

 

[BrownsonMcSoy]

I was moving everything from a 256GB micro SD to a 1TB micro SD and decided to just clone the entire SD card using AOMEI Partition Assistant. Now with the new micro SD I can inject Hekate just fine (as you would expect), but I get this screen when I try to go to my launch my EMUMMC I get this screen and trying to launch Android just seems to crash the system entirely. Should I just try to make a fresh install of Android/Ubuntu/EMUMMC or does this seem fixable?

 

[Gorkensnorkel]

HELP HELP, oh em gee!

I updated everything but I can't seem to launch ChoiDejourNX to update my firmware from 11.0.1 to 12.1.0. When I try to launch the app I get an error message.

Any advise would be greatly appreciated, thanks. >.<

Edit: Nevermind, I discovered the Daybreak app, crisis averted.

 

[goamn]

The Switch stopped working with CFW because the Switch's system version was updated to 12.x. You need to update Hekate and Atmosphere in order to get CFW working again. You can also reinstall AutoRCM using Hekate.

• Hekate: https://github.com/CTCaer/hekate/releases/latest
• Atmosphere: https://github.com/Atmosphere-NX/Atmosphere/releases/latest
• Signature patches: https://github.com/ITotalJustice/patches/releases/latest

I couldn't install most games using Awoo Installer, with this combination. Awoo Installer's latest signature patch(es) are for firmware version 11.X. Even after installing the latest signature patches, it refused to use them. So I first opened it (Awoo Installer), deleted/uninstalled signature patches via the GUI, then went back to applying the signature patches on the memory card (hekate ones) for 12.X. After that it worked . Although Awoo installer is still warning me about NCA signatures and it thinks there are no signature patches installed. Posting this for newbies who might be in the same boat.

 

[Lacius]

I couldn't install most games using Awoo Installer, with this combination. Awoo Installer's latest signature patch(es) are for firmware version 11.X. Even after installing the latest signature patches, it refused to use them. So I first opened it (Awoo Installer), deleted/uninstalled signature patches via the GUI, then went back to applying the signature patches on the memory card (hekate ones) for 12.X. After that it worked . Although Awoo installer is still warning me about NCA signatures and it thinks there are no signature patches installed. Posting this for newbies who might be in the same boat.

The NCA signatures warning is about the NSP files being altered, not about whether or not you have signature patches installed. Make sure your NSP files are coming from a trustworthy place. In my instructions, I said to use the signature patches from a very specific source, not to download them through an NSP installer.

 

[ganons]

What's the ideal firmware for atmosphere users?