Its a risk. There is no guarantee you will be banned but there is also not guarantee you will not be banned.
Can't play on a dirty nand online, what you could do is create an emunand and do all your homebrew/backup stuffs there and use sysnand for online.
hi everyone,
last time a was telling about sigpatches, (I couldn't start mario odyssey), draxzelex tell me that put new sigpatches, and I did, but no luck at all, everything is the same,
thanks everyone for help, especially draxzelex, but could I do anything else?
last time a was telling about sigpatches, (I couldn't start mario odyssey), draxzelex tell me that put new sigpatches, and I did, but no luck at all, everything is the same,
thanks everyone for help, especially draxzelex, but could I do anything else?
Thanks for your help. I am getting ready again. but as mentioned, I did have to reinstall many games, which is quite time consuming. is there an app that can select multiple games to install at once ?
By the meanings of a backup, is it required to fully backup the whole SD card, or is it sufficient to backup all custom FW folders, without the games ?
By the meanings of a backup, is it required to fully backup the whole SD card, or is it sufficient to backup all custom FW folders, without the games ?
Yes boot0/1 were successful restored with raw Emmc. Whats gpp? How do I check to find that? Firmware 10.2 was backed up
hello guys ... can you help me to find webkit lib or browser app from 11.0.1 ?
i have an webkit exploit that cause a kernel panic but i dont know how to debug... i come from ios .... there’s not even a kernel log here
ps. merry christmas to all
i have an webkit exploit that cause a kernel panic but i dont know how to debug... i come from ios .... there’s not even a kernel log here
ps. merry christmas to all
No one can help me?
Don't go downgrading to 4.1 unless you have a 4.1 NAND backup to restore to, 4.1.0 expects 5 fuse, if you have a lot higher fuse count then you won't be able to boot Sysnand. If you use Nintendo server to update you will burn your fuse. Emunand doesn't touch Sysnand after they are separated.
--------------------- MERGED ---------------------------
Try another person's build of the game, assuming you are using the correct patches with the correct bootloader.
guys, I have an SXOS modchip and use an emunand To play the pirated games, but I want to play some games online like animal crossing (I already bought the original version), if I start the Switch in the original FW, in sysnand, can I have any surprises and be banned? Or It is safe to play in an untouched sysnand? I always use emunand whit icognito and stealth mode to install games in tinfoil and play.
You will get banned eventually for going online on a dirty NAND, if you want to play online use a clean NAND.
How the hell do I extract an NSP for an update file? I'm trying to extract the game files in an attempt to mod Pokemon Shield, but I cannot for the life of me figure out how to get the damn NSP open. I feel like I need someone to explain to me like I'm a complete idiot what I'm missing here.
I have dumped my original game cartridge in both NSP and XCI formats, and i managed to use the dump tool to get the romfs from the base game. But then I find out that PkNx doesn't work for anything less than version 1.2.0, so I'll have to include the update files. So I dumped that to an NSP, and that's where I'm stuck. I can't seem to crack open this file and get what I need. I've tried hactool, unpack, yuzu, and a million other random things I found.
And yes, I dumped pretty much everything I could think of from my switch, including prod.keys, title.keys, the fuses, the nand, etc. No matter what I try, nothing works. I've been working on this literally all day and have accomplished precisely dick. I need a simple step by step process of exactly what I need to do to be able to mod this game in PkNx.
I have dumped my original game cartridge in both NSP and XCI formats, and i managed to use the dump tool to get the romfs from the base game. But then I find out that PkNx doesn't work for anything less than version 1.2.0, so I'll have to include the update files. So I dumped that to an NSP, and that's where I'm stuck. I can't seem to crack open this file and get what I need. I've tried hactool, unpack, yuzu, and a million other random things I found.
And yes, I dumped pretty much everything I could think of from my switch, including prod.keys, title.keys, the fuses, the nand, etc. No matter what I try, nothing works. I've been working on this literally all day and have accomplished precisely dick. I need a simple step by step process of exactly what I need to do to be able to mod this game in PkNx.
Hello, I've managed to get my hands on a V1 unpatched switch, and I would like to know what's THE definitive guide to install CFW.
I think the Switch is on OFW 11.x.
I think the Switch is on OFW 11.x.
Hello, when OFW gets update, do I need to make new copy of NAND + boot when using atmosphere?
This one is reasonable
https://birbchirp.gitbook.io/switchguide/fresh-cfw-setup-with-emummc
This one is reasonable
https://birbchirp.gitbook.io/switchguide/fresh-cfw-setup-with-emummc
Last edited by PrzemmeK,
Most title installers support installing multiple games at once. And you actually have it the opposite way when it comes to backups. You rarely, if ever, backup the CFW files because those are readily available online. You should make a backup of your games which are stored in the Nintendo folder.
The raw eMMC is the same thing as the raw eMMC GPP. Do you have a cartridge inserted into your console?
There is always a risk of a ban when going online with a hacked console. Its not a guarantee but it is also not safe.
Nope.
You have to use hactool to open the .NSP file.
https://switch.homebrew.guide/
You don't need to.
Hi I'm using SX Core on V1 with SX OS 3.1.0 CFW on emuNAND (emuNAND FW is 11.0.0)
I want to try to play online game so I open the SX boot loader, Cleanup SX Core, then proceed to boot OFW
After that I initialized to factory reset, and got a clean sysNAND with 10.0.1 OFW,
Then I update the OFW via System Update,
The problem starts from this
After the Update, I cannot boot OFW from SX bootloader again, it just shows black screen.
Several thread in this GBAtemp said that genuine boot will do the trick but I'm afraid to do so since
it gives warning that it may burnt fuses
I have backup the sysNAND before Updating so I could try to go back but before doing that
I want to ask:
1. Did I update the OFW wrongly?
2. Do I need to dump the raw NAND now since it's the updated OFW?
3. Do I need to genuine boot from SX bootloader? What are the consequences?
Any guidance is appreciated thank you.
I want to try to play online game so I open the SX boot loader, Cleanup SX Core, then proceed to boot OFW
After that I initialized to factory reset, and got a clean sysNAND with 10.0.1 OFW,
Then I update the OFW via System Update,
The problem starts from this
After the Update, I cannot boot OFW from SX bootloader again, it just shows black screen.
Several thread in this GBAtemp said that genuine boot will do the trick but I'm afraid to do so since
it gives warning that it may burnt fuses
I have backup the sysNAND before Updating so I could try to go back but before doing that
I want to ask:
1. Did I update the OFW wrongly?
2. Do I need to dump the raw NAND now since it's the updated OFW?
3. Do I need to genuine boot from SX bootloader? What are the consequences?
Any guidance is appreciated thank you.
Everytime i insert a game cartdridge on my switch it gives the error 2002-2634 (0x149402). It's on firmware 10.1.0, and my atmosphere is on version 0.16.1. Is there anything i can do?
It happens with every game cartdridge i have—Breath of the Wild, Splatoon 2, Rayman Legends and Mario Odyssey.
This started after i connected the SD on my notebook, to transfer some gameplay recorded videos to it. I have done this before, and nothing happened.
It happens with every game cartdridge i have—Breath of the Wild, Splatoon 2, Rayman Legends and Mario Odyssey.
This started after i connected the SD on my notebook, to transfer some gameplay recorded videos to it. I have done this before, and nothing happened.
Use it how? I already said I tried using it. HOW do I use it? Nobody ever has a straight answer, at least not one that works.
-
@
Sicklyboy:
I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version -
@
TwoSpikedHands:
@Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it! -
@
TwoSpikedHands:
I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
-
@
TwoSpikedHands:
I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
-
-
@
The Real Jdbye:
@TwoSpikedHands just switch, all the knowledge you learned still applies and most of the code and assets should be the same anyway -
@
The Real Jdbye:
and realistically they wouldn't
be able to play it legally anyway since they need a ROM and they probably don't have the means to dump it themselves -
-
-
-
-
@
Karma177:
do y'all think having an sd card that has a write speed of 700kb/s is a bad idea?
trying to restore emunand rn but it's taking ages... (also when I finished the first time hekate decided to delete all my fucking files
) -
-
-
-
@
Karma177:
@The Real Jdbye it hasn't given me any error trying to write things on it so I don't really think it's faulty (pasted 40/50gb+ folders and no write errors)
-
-
@
DinohScene:
when SD cards/microSD write speeds drop below a meg a sec, they're usually on the verge of dying+1 -
-
-
-
-
@
TwoSpikedHands:
@The Real Jdbye, I considered that, but i'll have to wait until i can get the eu version in the mail lol
-
I @ I-need-help-with-wup-wiiu:i need help with nusspli failed downloads, can someone respond to my thread? pretty please
-
