Hacking SWITCH NOOB PARADISE - Ask questions here

AeonGaiden

New Member
Newbie
Joined
Mar 22, 2020
Messages
3
Trophies
0
Age
43
XP
45
Country
United States
Forgive me, but I don't understand your setup. Per my instructions, you should be using fusee-primary, not Hekate. You should be enabling emuMMC using emummc.ini.


As a matter of troubleshooting, follow these steps:
  1. Make sure the SD card is FAT32.
  2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
  3. Download the latest Atmosphere
  4. Download the latest fusee-primary (next to Atmosphere)
  5. Download these signature patches (for Atmosphere v0.13.0)
  6. Put Atmosphere and the signature patches onto your SD card
  7. Put the SD into your Switch
  8. Enter RCM
  9. Launch Atmosphere using fusee-primary

Hey it worked! Thank you very much. I think it could of been that there was something leftover that was not computing with the newest atmos folder contents so when i actually deleted all of the previous atmos folders and replaced it as a fresh install it went back to normal. Thanks again!
 
  • Like
Reactions: Lacius

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,099
Trophies
3
XP
18,338
Country
United States
View attachment 216501 View attachment 216502

So this is how I've got my setup, that's the emuMMC ini and I'm injecting fusee-primary.bin
emummc!enabled = 1
^This is what you should have.

hey uhh so I've tried installing a game but i always get a sigpatch error ._. im using goldleaf, newest version of atmosphere + new patches so idk what im doing wrong :(
As a matter of troubleshooting, follow these steps:
  1. Make sure the SD card is FAT32.
  2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
  3. Download the latest Atmosphere
  4. Download the latest fusee-primary (next to Atmosphere)
  5. Download these signature patches (for Atmosphere v0.13.0)
  6. Put Atmosphere and the signature patches onto your SD card
  7. Put the SD into your Switch
  8. Enter RCM
  9. Launch Atmosphere using fusee-primary
You're probably using the wrong patches for the wrong bootloader.
 
  • Like
Reactions: Manaboy

Manaboy

Well-Known Member
Newcomer
Joined
Dec 18, 2017
Messages
68
Trophies
0
Age
35
XP
237
Country
United Kingdom
Bro, thank a lot, I installed one game before and after correcting the emummc ini file I booted into cfw and that one game I had installed was gone so I assume it booted into emuMMC, I booted back into sysmmc and uninstall that game and switch back to emuMMC. I don't know why no guides mentioned this issue and why hektate atmosphere cfw booting no longer works on RCM enabled unpatched switch on fw above 8.0.


I wanted a sort of dual boot where sysmmc is clean and I can boot into it for online and emummc is what I use to play backups homebrew etc.

No step by step guides for that.


If I wanted to restore my sysMMC using hektate and what files do I restore from my backup, boot 1 and boot 2 or the raw backup?
Only reason is because I installed two backup games and Tinfoil to system nand, I did uninstall them using tinfoil but I don't know if any trace was left behind.
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,985
Trophies
2
Age
29
Location
New York City
XP
13,323
Country
United States
If I wanted to restore my sysMMC using hektate and what files do I restore from my backup, boot 1 and boot 2 or the raw backup?
Only reason is because I installed two backup games and Tinfoil to system nand, I did uninstall them using tinfoil but I don't know if any trace was left behind.
You have to restore all 3 of those files.
 
  • Like
Reactions: Manaboy

Photojourna1ist

New Member
Newbie
Joined
Jul 8, 2020
Messages
2
Trophies
0
Age
43
XP
43
Country
United States
Just dumped my first game via NXDumptool, installed via Goldenleaf, and when I go to launch I get this message: "A new update is available. It will be downloaded now." Options: Cancel, Download, Start Software. I have DNS blocked so the Download option fails if I choose Start Software, the game starts and plays fine. Just annoying and no way my 5-year-old will do this. Running Atmosphere newest, injecting via hekate 5.3 on emmuMCC. Any help would be great. Thanks.
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,985
Trophies
2
Age
29
Location
New York City
XP
13,323
Country
United States
Just dumped my first game via NXDumptool, installed via Goldenleaf, and when I go to launch I get this message: "A new update is available. It will be downloaded now." Options: Cancel, Download, Start Software. I have DNS blocked so the Download option fails if I choose Start Software, the game starts and plays fine. Just annoying and no way my 5-year-old will do this. Running Atmosphere newest, injecting via hekate 5.3 on emmuMCC. Any help would be great. Thanks.
Just install the update.
 

1alien1

Well-Known Member
Member
Joined
Aug 26, 2013
Messages
134
Trophies
0
XP
205
Country
Gambia, The
hej guys,
something strange happened to me. i updated my switch as i always do, via choidur in emunand. i updated from 10.0.2 to 10.0.4, everything worked as usual. i saw the system version in the settings in both emunand and sysnand. then i downloaded the latest smash update in my clean sysnand, so i can keep playing online as usual. when it finished downloading the smasm update, i got the popup to update my system firmware. the annoying message keeps popping up even after restarting and so on. what gives?

another question is, do i even have to go through all the trouble with downloading the ofw and do the offline install, when i burn fuses anyway to play online?

id appreciate the help!

im at the latest 3.0.3 sx beta
 

anna236_

New Member
Newbie
Joined
Jul 8, 2020
Messages
2
Trophies
0
Age
23
XP
42
Country
United States
Why won't sigpatches work? I installed them for the newest atmosphere and put them in the corresponding folders but yet it still doesnt work. I attached the zip i downloaded.
Edit: forgot to mention that they were working at one point but stopped working after i turned the system off
 

Attachments

  • 2.0.0-10.0.4_for_AMS_0.13_and_0.12_and_0.11.1.zip
    15.8 KB · Views: 125

Fardkadabra

New Member
Newbie
Joined
Jul 8, 2020
Messages
2
Trophies
0
Age
44
XP
72
Country
Germany
Hi @ All,

my Switch serial: XAJ1003665
MOD: HAC-001 Made in China 2018

So my switch is definitfly patched. i tried it anyway with putting to recovery mod and trying to inject with Tegra 2.6
SD Card was on FAT32 and athmosphäre data copied
got following message after injecting
Uploading payload (mezzo size: 92, user size: 91872, total size: 158088, total padded size: 159744)...
Smashing the stack!
Smashed the stack with a 0x0000 byte SETUP request!
Payload successfully injected
RCM device disconnected

i disconnected from usb cable and pressing power button for 10 seconds to reboot. no atmosphäre logo appeared and nothing under albums

definitvly not working or any mistake from my side?

i heard there is even if my switch is patched there is still an option with SX Lite or SX Core

can you please clarify?
 

tyroteki

New Member
Newbie
Joined
Jun 25, 2020
Messages
4
Trophies
0
Age
39
XP
47
Country
Poland
I just thinking about SX CORE my Switch and have some questions about it:
1. How i can make clean backup befor start?
2. Can I play safe online after load Original FW and play my bought games?
 

persianpariah667

Active Member
Newcomer
Joined
Mar 18, 2020
Messages
27
Trophies
0
XP
116
Country
United States
Hi everyone! I have a few questions about updating my emuMMC's firmware. I'm running Atmosphere on emuMMC and using hekate if that matters. My emuNAND's system version is still 9.2.0 but my versions of atmosphere and hekate are completely up to date.

  • I've heard of using ChoiDujourNX to update the firmware but I was wondering if it was possible to just update OTA?
  • Would that have any adverse effects on my CFW? My normal sysNAND is completely up to date.
  • And, if I do update my emuNAND's firmware, would I have to go through the entire home-brew process again from the beginning?

Any answers are appreciated; thank you so much for reading. Have a good day
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,985
Trophies
2
Age
29
Location
New York City
XP
13,323
Country
United States
hej guys,
something strange happened to me. i updated my switch as i always do, via choidur in emunand. i updated from 10.0.2 to 10.0.4, everything worked as usual. i saw the system version in the settings in both emunand and sysnand. then i downloaded the latest smash update in my clean sysnand, so i can keep playing online as usual. when it finished downloading the smasm update, i got the popup to update my system firmware. the annoying message keeps popping up even after restarting and so on. what gives?

another question is, do i even have to go through all the trouble with downloading the ofw and do the offline install, when i burn fuses anyway to play online?

id appreciate the help!

im at the latest 3.0.3 sx beta
ChoiDujour only supports up to firmware 6.2 so its impossible for you to have updated with it. And you don't need to burn fuses to play online.

Hi @ All,

my Switch serial: XAJ1003665
MOD: HAC-001 Made in China 2018

So my switch is definitfly patched. i tried it anyway with putting to recovery mod and trying to inject with Tegra 2.6
SD Card was on FAT32 and athmosphäre data copied
got following message after injecting


i disconnected from usb cable and pressing power button for 10 seconds to reboot. no atmosphäre logo appeared and nothing under albums

definitvly not working or any mistake from my side?

i heard there is even if my switch is patched there is still an option with SX Lite or SX Core

can you please clarify?
The SX Lite is a modchip only designed for the Nintendo Switch Lite. The SX Core supports all current non-Lite models however it requires soldering.

Hi everyone! I have a few questions about updating my emuMMC's firmware. I'm running Atmosphere on emuMMC and using hekate if that matters. My emuNAND's system version is still 9.2.0 but my versions of atmosphere and hekate are completely up to date.

  • I've heard of using ChoiDujourNX to update the firmware but I was wondering if it was possible to just update OTA?
  • Would that have any adverse effects on my CFW? My normal sysNAND is completely up to date.
  • And, if I do update my emuNAND's firmware, would I have to go through the entire home-brew process again from the beginning?

Any answers are appreciated; thank you so much for reading. Have a good day
  • You can but if you do not perform the system update in CFW with AutoRCM enabled, you will irreversibly burn fuses
  • See above
  • I'm not sure what you mean by this question
 

phillyrider807

Well-Known Member
Member
Joined
May 2, 2009
Messages
447
Trophies
1
XP
1,402
Country
United States
Hey. So i just installed "USB-Botbase" so i can use ACNHPoker and everything works fine. However now i can no longer install nsps through usb. My switch no longer connects to "NUT" server.


I just installed a game yesterday and it was fine so im sure something happened when i installed "USB-Botbase" Any help?


Edit
Damn also seems to have broken nxmtp. Any help?
 
Last edited by phillyrider807,

djCapi

New Member
Newbie
Joined
Jul 5, 2020
Messages
3
Trophies
0
Age
40
Location
Dallas, Tx
XP
58
Country
United States
So I bought a used un-patched switch (going to do a full restore on it back to factory), I have a jig on the way and have found a few guides for CFW. I have a few questions however:

If it possible, to boot into OFW and CFW separately? If I understand correctly, as long as sysNAND is clean-- which it should be because of factory reset and setting up a emuNAND) I will be able to however, once I go into OFW, how do I get back to CFW (do I have to do the jig and hook up to tegra on the PC again?).

IF I have the setup listed above (clean sysNAND and emuNAND set up) will I be able to update OFW and update games and purchase DLC normally, then hop into CFW (offline) to play them if I want?

FInal question lol: I found a guide on NH Server github as well as moddzvilleUSA videos. Is there a specific updated for 2020 guide with what I'm trying to accomplish? I noticed moddzville videos use SxOS to create emuNAND vs guide using Hekate to create it. Any difference?

Thank you in advance for helping this newcomer at.
 
  • Like
Reactions: Stealphie

Fardkadabra

New Member
Newbie
Joined
Jul 8, 2020
Messages
2
Trophies
0
Age
44
XP
72
Country
Germany
If i buy a used switch which is not patched vut updated to the newest version 10.0.4
Ist that still possible to load a cfw on this? Or do i need a unpatched switch?

Gesendet von meinem VOG-L29 mit Tapatalk
 

1alien1

Well-Known Member
Member
Joined
Aug 26, 2013
Messages
134
Trophies
0
XP
205
Country
Gambia, The
ChoiDujour only supports up to firmware 6.2 so its impossible for you to have updated with it. And you don't need to burn fuses to play online.

The SX Lite is a modchip only designed for the Nintendo Switch Lite. The SX Core supports all current non-Lite models however it requires soldering.


  • You can but if you do not perform the system update in CFW with AutoRCM enabled, you will irreversibly burn fuses
  • See above
  • I'm not sure what you mean by this question

hej, ive been using ChoiDujourNX forever for updating, and it worked every single time????? is it the NX suffix that is a different program or whats going on?
how do i not have to burn fuses when using sysnand to play the games online on a clean sysnand? i thought if you dont, youll get banned?

edit: or was it like this, if i update my emunand via choidujournx, it only updates emunand firmware and not sysnand too and i had to update that the normal official way?
 
Last edited by 1alien1,

CassioAug

Well-Known Member
Member
Joined
May 20, 2019
Messages
145
Trophies
0
Age
33
XP
187
Country
Brazil
Is it safe to turn AutoRCM on and off as much as I want? There's any kind of risk to it?
It's because I like to let AutoRCM on when I need to remove the SD card to manage it on PC, but I don't feel comfortable letting it activated 24/7 since it can cause some difficulties if battery drains out.
If it matters I use SX-OS and I enable or disable AutoRCM through it.
 
Last edited by CassioAug,

Clovus

Member
Newcomer
Joined
Feb 24, 2020
Messages
14
Trophies
0
Age
26
XP
115
Country
United States
Sorry if this has been asked before but I'm thinking of getting an SX Core for my Switch but want to know if I can run hekate/Atmosphere on it. Is this possible if I use the SX Gear's boot.dat file to load fuse or hekate from the SD card?

You know the same way it's done with SX Pro?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • ZeroT21 @ ZeroT21:
    it wasn't a question, it was fact
  • BigOnYa @ BigOnYa:
    He said he had 3 different doctors apt this week, so he prob there. Something about gerbal extraction, I don't know.
    +1
  • ZeroT21 @ ZeroT21:
    bored, guess i'll spread more democracy
  • LeoTCK @ LeoTCK:
    @K3Nv2 one more time you say such bs to @BakerMan and I'll smack you across the whole planet
  • K3Nv2 @ K3Nv2:
    Make sure you smack my booty daddy
    +1
  • LeoTCK @ LeoTCK:
    telling him that my partner is luke...does he look like someone with such big ne
    eds?
  • LeoTCK @ LeoTCK:
    do you really think I could stand living with someone like luke?
  • LeoTCK @ LeoTCK:
    I suppose luke has "special needs" but he's not my partner, did you just say that to piss me off again?
  • LeoTCK @ LeoTCK:
    besides I had bigger worries today
  • LeoTCK @ LeoTCK:
    but what do you know about that, you won't believe me anyways
  • K3Nv2 @ K3Nv2:
    @BigOnYa can answer that
  • BigOnYa @ BigOnYa:
    BigOnYa already left the chat
  • K3Nv2 @ K3Nv2:
    Biginya
  • BigOnYa @ BigOnYa:
    Auto correct got me, I'm on my tablet, i need to turn that shit off
  • K3Nv2 @ K3Nv2:
    With other tabs open you perv
  • BigOnYa @ BigOnYa:
    I'm actually in my shed, bout to cut 2-3 acres of grass, my back yard.
  • K3Nv2 @ K3Nv2:
    I use to have a guy for that thanks richard
  • BigOnYa @ BigOnYa:
    I use my tablet to stream to a bluetooth speaker when in shed. iHeartRadio, FlyNation
  • K3Nv2 @ K3Nv2:
    While the victims are being buried
  • K3Nv2 @ K3Nv2:
    Grave shovel
  • BigOnYa @ BigOnYa:
    Nuh those goto the edge of the property (maybe just on the other side of)
  • K3Nv2 @ K3Nv2:
    On the neighbors side
    +1
  • BigOnYa @ BigOnYa:
    Yup, by the weird smelly green bushy looking plants.
    K3Nv2 @ K3Nv2: https://www.the-sun.com/news/10907833/self-checkout-complaints-new-target-dollar-general-policies...