Bought a broken V2 Nintendo Switch off ebay. It's as if it doesn't detect any eMMC. I tested with other eMMC and same result. I know another wont work but was hoping I would at least get a different result.
It will not power on and seems to go into RCM mode when you power it on.
It charges at 5V and .43A.
I can not inject any payload as it is patched.
I have replaced LCD connector
USB-C port
M92T36
PI3USB
BQ24913
Main Fuse
I do not find any shorts on the board when I have tested.
M92T36 pin 5 I get 3.2V Pin 6 I get 3.2V
Any help would be appreciated!
It will not power on and seems to go into RCM mode when you power it on.
It charges at 5V and .43A.
I can not inject any payload as it is patched.
I have replaced LCD connector
USB-C port
M92T36
PI3USB
BQ24913
Main Fuse
I do not find any shorts on the board when I have tested.
M92T36 pin 5 I get 3.2V Pin 6 I get 3.2V
Any help would be appreciated!