Hacking Nintendont (Wii) USB Gamecube controller (Nintendo switch)

[WhiteGg]

What do you mean stick unabled?

What do you mean they are unabled? Before you said they were just swapped around? Adding digitalanalog=1 could work for the R and L buttons, in other words the bottom shoulder buttons.

--------------------- MERGED ---------------------------


Ok so only right and left movement of the white stick works or is that the same for the yellow right stick? You'll just have to try around. Eventually look at HID Test again. I read that you should run HID Test without the controller .ini on your sd card/usb. Not sure what difference it makes. Maybe it interferes with the values you get.

yes they are swapped and also in the menu I can just move up and down so Left and right are not working, I will try like this
[Nintendo Switch GameCube Controller Wired Fight Pad Pro]
VID=0E6F
PID=0185
Polltype=1
DPAD=1
DigitalLR=1
DigitalAnalog=1
Power=1,30
A=0,04
B=0,02
X=0,08
Y=0,01
Z=0,10
L=0,40
R=0,80
S=1,02
Left=2,06
Down=2,04
Right=2,02
Up=2,00
RightUp=2,01
DownRight=2,03
DownLeft=2,05
UpLeft=2,07
StickX=4,0
StickY=5,0
CStickX=6,0
CStickY=7,0
LAnalog=1,04
RAnalog=1,08

--------------------- MERGED ---------------------------

ok the analog buttons works now, just the joystick are missing, Ill try the hid again

--------------------- MERGED ---------------------------

When I press the joystick up it goes left, but if I press the yellow one left, it goes Up like if it was the white one, WTF?

--------------------- MERGED ---------------------------

now the problem are the joysticks hmm they work cause on hid it dettects them but idk which numbers I have to write to put them in order

 

[Zense]

yes they are swapped and also in the menu I can just move up and down so Left and right are not working, I will try like this
[Nintendo Switch GameCube Controller Wired Fight Pad Pro]
VID=0E6F
PID=0185
Polltype=1
DPAD=1
DigitalLR=1
DigitalAnalog=1
Power=1,30
A=0,04
B=0,02
X=0,08
Y=0,01
Z=0,10
L=0,40
R=0,80
S=1,02
Left=2,06
Down=2,04
Right=2,02
Up=2,00
RightUp=2,01
DownRight=2,03
DownLeft=2,05
UpLeft=2,07
StickX=4,0
StickY=5,0
CStickX=6,0
CStickY=7,0
LAnalog=1,04
RAnalog=1,08

--------------------- MERGED ---------------------------

ok the analog buttons works now, just the joystick are missing, Ill try the hid again

--------------------- MERGED ---------------------------

When I press the joystick up it goes left, but if I press the yellow one left, it goes Up like if it was the white one, WTF?

--------------------- MERGED ---------------------------

now the problem are the joysticks hmm they work cause on hid it dettects them but idk which numbers I have to write to put them in order

Are you sure you need the" ,0" for the joysticks?

Also if you tell me what joystick and it's movement does what I might be able to help you figure them out.

 

[WhiteGg]

Are you sure you need the" ,0" for the joysticks?

Also if you tell me what joystick and it's movement does what I might be able to help you figure that one out.

white joystick: up goes to left and down goes to right, the yellow joystick works as it was the white because when I press left with the yellow it goes up (the up that was suppose to be the white one) and right: down (also the one that was from the white}

 

[Zense]

white joystick: up goes to left and down goes to right, the yellow joystick works as it was the white because when I press left with the yellow it goes up (the up that was suppose to be the white one) and right: down (also the one that was from the white}

StickX=5
StickY=6
What does right and left do with the white joystick?

 

[WhiteGg]

StickX=5
StickY=6
What does right and left do with the white joystick?

nothing

 

[Zense]

nothing

Ok. And up and down with the yellow joystick?

--------------------- MERGED ---------------------------

Ok. And up and down with the yellow joystick?

Btw are you testing with a game that actually uses the yellow stick?

 

[WhiteGg]

StickX=5
StickY=6
What does right and left do with the white joystick?

I tried it and Up is still going left and the other ones same as they were before

--------------------- MERGED ---------------------------

Ok. And up and down with the yellow joystick?

--------------------- MERGED ---------------------------


Btw are you testing with a game that actually uses the yellow stick

yes im using sonic adventure battle 2 it uses both and is the same, the 2 directions that works on yellow are the ones that are missing in the white one and both joysticks have 2 directions that do nothing

 

[Zense]

I tried it and Up is still going left and the other ones same as they were before

That makes no sense. Did you edit all inis? Like if you have it saved several places like sd, usb, controller folder etc.

 

[WhiteGg]

That makes no sense. Did you edit all inis? Like if you have it saved several places like sd, usb, controller folder etc.

I have copies and the one Im using now is the one you sent me and I just added the analog buttons and they work now cause they didn't before and that's all, is all the same, I can't add an option like Stick-X or stick-Y to add different numbers because they are like mixed and both have 2 useless directions, wtf is wrong with this jajajaj

 

[Zense]

StickX=5
StickY=6

So all your inis were edited to this? From what you've told me it seems like offsets 4 and 7 are wrong or do not work for some reason.

 

[WhiteGg]

So all your inis were edited to this?

thats the one im using now and it is still swapped

 

[Zense]

thats the one im using now and it is still swapped

Did you ever try changing to DigitalAnalog=0

 

[WhiteGg]

So all your inis were edited to this? From what you've told me it seems like offsets 4 and 7 are wrong or do not work for some reason.

Did you ever try changing to DigitalAnalog=0

but isn't that just about the analogs? they are working perfectly now

 

[Zense]

I'm not sure cuz I think the DigitalLR is the on that affects the shoulder buttons, while DigitalAnalog decides if your joystick is an analog joystick or a digital one. I would guess yours are digital ones at this point. Worth a shot.

 

[WhiteGg]

ok im trying now

 

[Zense]

I believe I saw some inis have DigitalAnalog=2 as well so you could try that I guess.

 

[WhiteGg]

I believe I saw some inis have DigitalAnalog=2 as well so you could try that I guess.

ok it is still the same with analog in 1 and R L are working correctly so I will try using 2 now

--------------------- MERGED ---------------------------

ok it is still the same with analog in 1 and R L are working correctly so I will try using 2 now

ok something weird is going on now, the yellow sticks works as it was the white one, and the white one does nothing, the yellow has al the functions of the white in order... WHAT

--------------------- MERGED ---------------------------

[Nintendo Switch GameCube Controller Wired Fight Pad Pro]
VID=0E6F
PID=0185
Polltype=1
DPAD=1
DigitalLR=1
DigitalAnalog=2
Power=1,30
A=0,04
B=0,02
X=0,08
Y=0,01
Z=0,10
L=0,40
R=0,80
S=1,02
Left=2,06
Down=2,04
Right=2,02
Up=2,00
RightUp=2,01
DownRight=2,03
DownLeft=2,05
UpLeft=2,07
StickX=5
StickY=6
CStickX=4
CStickY=7
LAnalog=1,04
RAnalog=1,08

thats how it is now

 

[Zense]

ok it is still the same with analog in 1 and R L are working correctly so I will try using 2 now

--------------------- MERGED ---------------------------


ok something weird is going on now, the yellow sticks works as it was the white one, and the white one does nothing, the yellow has al the functions of the white in order... WHAT

--------------------- MERGED ---------------------------

[Nintendo Switch GameCube Controller Wired Fight Pad Pro]
VID=0E6F
PID=0185
Polltype=1
DPAD=1
DigitalLR=1
DigitalAnalog=2
Power=1,30
A=0,04
B=0,02
X=0,08
Y=0,01
Z=0,10
L=0,40
R=0,80
S=1,02
Left=2,06
Down=2,04
Right=2,02
Up=2,00
RightUp=2,01
DownRight=2,03
DownLeft=2,05
UpLeft=2,07
StickX=5
StickY=6
CStickX=4
CStickY=7
LAnalog=1,04
RAnalog=1,08

thats how it is now

Looking back at our posts and to the guides I linked to, why did you add DigitalAnalog to begin with? It's not listed anywhere as a valid option.

 

[WhiteGg]

What do you mean stick unabled?

What do you mean they are unabled? Before you said they were just swapped around? Adding digitalanalog=1 could work for the R and L buttons, in other words the bottom shoulder buttons.

--------------------- MERGED ---------------------------


Ok so only right and left movement of the white stick works or is that the same for the yellow right stick? You'll just have to try around. Eventually look at HID Test again. I read that you should run HID Test without the controller .ini on your sd card/usb. Not sure what difference it makes. Maybe it interferes with the values you get.

I thought it would work, you said it there :'v, so now I have to remove digital analog or change the numbers>

 

[Zense]

I thought it would work, you said it there :'v, so now I have to remove digital analog or change the numbers>

Yeah, I dunno. I'm probably too tired rn. Try removing it and see what happens. Then try changing to:
StickX=4
StickY=7
CstickX=5
CstickY=6
I'll come back later...