Homebrew RELEASE ChoiDujourNX - a system firmware installer homebrew for the Nintendo Switch

[Xyphoseos]

Left seem correct, you can download from that darth site if you need it.

So If I want I can use my 8.0.1 isn't it ?

 

[Hayato213]

So If I want I can use my 8.0.1 isn't it ?

I got the firmware file from that Darth site.

 

[Xyphoseos]

²²²

I got the firmware file from that Darth site.

With .nca only or with folders ?

 

[Hayato213]

²²²

With .nca only or with folders ?

All the one I have used so far is only .nca not folder, check the darth site , perhaps you got a bad copy since you said you got it else where.

 

[unvaluablespace]

ChoiDujour doesn't support 6.2+, I also have a defective touchscreen. In the time I wasted trying to get it to work with 7.0.1 I could've already wrote in controller support to ChoiDujourNX and created a PR if it was open source. Thanks @rajkosto !

I also have a defective touchscreen. I've replaced my touchscreen but the issue still persists. Would love for choidujournx to have controller support, though I feel like there has to be a reason the app was developed with only touchscreen support...

 

[Y0sh1]

@rajkosto you might want to update the first post with the new 1.0.2 version

 

[d2thec]

Hey guys,
My installation gave me an error while updating to 7.0.1, and now the screen stays black after the Nintendo logo.
What can i do?

 

[Perestroika]

@rajkosto you might want to update the first post with the new 1.0.2 version

he won't, since he haven't been online for months! I doubt he will come back

 

[Philliyxx]

he won't, since he haven't been online for months! I doubt he will come back

He has not been online because he's the hero GBAtemp deserves, but not the one it needs right now. So we'll talk shit about him. Because he can take it. Because he's not our hero. He's a silent guardian of the switch scene. A watchful protector. A Dark Knight.

 

[nintendowii]

Hello,
i am on FW 7.0.1 with AMS 0.8.9 and AutoRCM.
I want to update to 8.0.1 with v1.0.2 but when it will start to install it says error cant write boot1. What do i wrong?

Edit: its seems that the current hbloader causes the issue. if i start hbl over album it worked.

 

[ZachyCatGames]

What is the bis_protection for?

makes sure it’s able to properly write to all of the partitions before trying to do so

 

[jguerreroska]

hello guys how are you, I have a console with 8.0.1 updated normally by official update, I have the known problem that the program was closed due to an error, I want to know several things

1) Can I try to install the same software on my system to see if it is fixed ?, Try everything, format the console, try different cfw and also the problem also gives me games in official firmware.

2) can I downgrade the firmware to another using the choi? Is there any possibility knowing that I have the fuses burned?

or in that case run a lower firmware?

they would help me incredibly to repair this error that has me crazy, every game that I open gives the error, good greetings.

 

[Draxzelex]

hello guys how are you, I have a console with 8.0.1 updated normally by official update, I have the known problem that the program was closed due to an error, I want to know several things

1) Can I try to install the same software on my system to see if it is fixed ?, Try everything, format the console, try different cfw and also the problem also gives me games in official firmware.

2) can I downgrade the firmware to another using the choi? Is there any possibility knowing that I have the fuses burned?

or in that case run a lower firmware?

they would help me incredibly to repair this error that has me crazy, every game that I open gives the error, good greetings.

1. Yes
2. Yes but you can only boot the console with a bootloader that bypasses the fuse check which all of them happen to do. This also makes AutoRCM mandatory because your console will be stuck on a RCM-less black screen otherwise but ChoiDujourNX automatically enables AutoRCM whenever it installs any firmware. One last thing to keep in mind is that if you downgrade to any firmware below 8.0, you will most likely require to initialize your console which will wipe all of your save data and installed content.

 

[jguerreroska]

1. Yes
2. Yes but you can only boot the console with a bootloader that bypasses the fuse check which all of them happen to do. This also makes AutoRCM mandatory because your console will be stuck on a RCM-less black screen otherwise but ChoiDujourNX automatically enables AutoRCM whenever it installs any firmware. One last thing to keep in mind is that if you downgrade to any firmware below 8.0, you will most likely require to initialize your console which will wipe all of your save data and installed content.

hank you very much really helped me to clear my doubts, I will try this and I see that it turns out, anyway always with my support of the nand in case I get to have any problem, greetings.

 

[jguerreroska]

hello friends how are you, yesterday I tried to do the steps required to see if it solved the error "the program has been closed by an error", I had no luck, try to install 8.0.1 on 8.0.1 with choiNx but it would not let me, then segui keyendo I installed the 8.0.0, then the console did not boot and restore the BOOT 0 and BOOT 1 of my backup and started but in 8.0.0, I still have the same problem, would there be any way to go below? Are fuses blown from 8.0.0 to 8.0.1? I'm a little desperate because the console does not want to run any game, I have not tried in ofw but it must be in the same situation since I come from there, good greetings.

 

[uzimakiuchiha]

hello friends how are you, yesterday I tried to do the steps required to see if it solved the error "the program has been closed by an error", I had no luck, try to install 8.0.1 on 8.0.1 with choiNx but it would not let me, then segui keyendo I installed the 8.0.0, then the console did not boot and restore the BOOT 0 and BOOT 1 of my backup and started but in 8.0.0, I still have the same problem, would there be any way to go below? Are fuses blown from 8.0.0 to 8.0.1? I'm a little desperate because the console does not want to run any game, I have not tried in ofw but it must be in the same situation since I come from there, good greetings.

Just in case you had my simple issue a few months back, delete the 0100000000001000 folder from titles if you're trying to load atmosphere

 

[jguerreroska]

Just in case you had my simple issue a few months back, delete the 0100000000001000 folder from titles if you're trying to load atmosphere

greetings, I want to try several things to see what happens, anyway the problem I have of "the program has been closed due to an error" still persists, do not know if I could go down to 7.0.1 ?, to see if I can do something so that the problem does not follow thanks.

 

[uzimakiuchiha]

Oh I reread your post I was tired sorry. You probably need fs sigpatches

 

[lordelan]

Anyone else has issues updating to 8.0.1?
I tried, selected the folder and everything seemed fine. Then I hit the final "INSTALL" button and it gave me an atmo error screen and rebooted.
(thank god it really rebooted and did not damage the system)

 

[Zdobuzdo]

Hi! Question about update with Choi. I am on 2.53 an 5.1 cfw. How to know on which ofw is my switch? Is there a need to know that if i have to update to 6.2?