so i got r4i rts 3ds for my consle i tried to install custom firmware and i messed up and need to do it again but it wont read the cardrige i need help i try format didn't work someone please help me
The console won't show an icon on the homescreen when NTRBootHaX is flashed on to it. I assume you didn't restore it if you didn't successfully install CFW. If that's the case, your card is fine it's just flashed already so it's not going to work "normally" and it will seem like the console isn't reading it due to lack of icon; that's because of the hax installed on the card.so i got r4i rts 3ds for my consle i tried to install custom firmware and i messed up and need to do it again but it wont read the cardrige i need help i try format didn't work someone please help me
I'm using an 2ds that my brother want to install it so i follow the instructon and here what threw me off it said turn off the consle and turn on sleep mode than press power start slected start and x at the same time and so i did and hold it for a few second and it won't load that it suppose to load so im confuse on why it won't work and i use my 3ds xl and it work fine with me with the magment but with the 2ds it to difficult to understand since the guide only talk about the 3dsThe console won't show an icon on the homescreen when NTRBootHaX is flashed on to it. I assume you didn't restore it if you didn't successfully install CFW. If that's the case, your card is fine it's just flashed already so it's not going to work "normally" and it will seem like the console isn't reading it due to lack of icon; that's because of the hax installed on the card.
You just need to try and install it again.....Assuming it really didn't work. Speaking of which, why didn't it work? That would help because perhaps you're doing something wrong, or like so many others you installed it already and don't realize it.
Well is it an original 2DS? Or is it a NEW 2DS that just came out? The original one doesn't need the magnet, it has a switch to enable sleep mode. The NEW 2DS works just like a 3DS would.I'm using an 2ds that my brother want to install it so i follow the instructon and here what threw me off it said turn off the consle and turn on sleep mode than press power start slected start and x at the same time and so i did and hold it for a few second and it won't load that it suppose to load so im confuse on why it won't work and i use my 3ds xl and it work fine with me with the magment but with the 2ds it to difficult to understand since the guide only talk about the 3ds
It's the originalWell is it an original 2DS? Or is it a NEW 2DS that just came out? The original one doesn't need the magnet, it has a switch to enable sleep mode. The NEW 2DS works just like a 3DS would.
It's the original
Ok so now it in sleep mode the power is off and now i do power start select and x at the same time
- Locate the switch labeled "SLEEP" on the bottom right of the system.
- Press the switch all the way to the right. You should see an orange color show up when the switch is pressed all the way to the right.
It dosen't seem to want to turn on i didn't 7 time waited several second but still black screenRead my post again, I edited it......
If these don't work is there a way to just restart and do it over again by installing ntrboot or noAll I can say is double check your files, make sure they are on the 2DS' SD and not the Flashcards..... Try taking the flashcard out and putting it in again, etc.
If you haven't reflashed your flashcard back to stock, it still should be in NTRBoot mode. Just make sure you have all files on SD and try putting thin piece of paper under your flashcard. Sometimes there is not good contact.If these don't work is there a way to just restart and do it over again by installing ntrboot or no
First how do i tell is my flashcard is in ntrboot mode and i tried the piece of paper it didn't workIf you haven't reflashed your flashcard back to stock, it still should be in NTRBoot mode. Just make sure you have all files on SD and try putting thin piece of paper under your flashcard. Sometimes there is not good contact.
Well everytime i enter my flash card into the consle it dosen't pop up but than when i do the power start selected and x it dosen't turn on or when it dose it dosen't give me the bootstrap but i have all the files i needinsert your flashcart into your console and power it on. If the flashcart shows on the home menu in the game cart slot, it means it isn't flashed.
it's not showinginsert your flashcart into your console and power it on. If the flashcart shows on the home menu in the game cart slot, it means it isn't flashed with ntrboot.
So i have the flashcard flashed cause it not showing up in the home menu and i have the files for the mirocsd i tried the hold power start selected and x but everytime i do that either nothing will happen or it will turn on but will not give me what i wantSo, it's already flashed. The microsd is in the console and not in the flashcart, correct?
Yes it have the files that i need i can even show you the picture if you likeYou didn't answer my question. Is the micro sd card, the card with the files on it, inside the 2DS or inside the flashcart?
Yes it have the files that i need i can even show you the picture if you like