Hacking Help u messed up with the firmware

MangoMango

Member
OP
Newcomer
Joined
Nov 16, 2017
Messages
12
Trophies
0
Age
23
XP
51
Country
United States
so i got r4i rts 3ds for my consle i tried to install custom firmware and i messed up and need to do it again but it wont read the cardrige i need help i try format didn't work someone please help me
 

Majickhat55

The Red Woman
Member
Joined
Mar 28, 2016
Messages
4,936
Trophies
1
Age
36
Location
Asshai
XP
2,958
Country
United States
so i got r4i rts 3ds for my consle i tried to install custom firmware and i messed up and need to do it again but it wont read the cardrige i need help i try format didn't work someone please help me
The console won't show an icon on the homescreen when NTRBootHaX is flashed on to it. I assume you didn't restore it if you didn't successfully install CFW. If that's the case, your card is fine it's just flashed already so it's not going to work "normally" and it will seem like the console isn't reading it due to lack of icon; that's because of the hax installed on the card.

You just need to try and install it again.....Assuming it really didn't work. Speaking of which, why didn't it work? That would help because perhaps you're doing something wrong, or like so many others you installed it already and don't realize it.
 

MangoMango

Member
OP
Newcomer
Joined
Nov 16, 2017
Messages
12
Trophies
0
Age
23
XP
51
Country
United States
The console won't show an icon on the homescreen when NTRBootHaX is flashed on to it. I assume you didn't restore it if you didn't successfully install CFW. If that's the case, your card is fine it's just flashed already so it's not going to work "normally" and it will seem like the console isn't reading it due to lack of icon; that's because of the hax installed on the card.

You just need to try and install it again.....Assuming it really didn't work. Speaking of which, why didn't it work? That would help because perhaps you're doing something wrong, or like so many others you installed it already and don't realize it.
I'm using an 2ds that my brother want to install it so i follow the instructon and here what threw me off it said turn off the consle and turn on sleep mode than press power start slected start and x at the same time and so i did and hold it for a few second and it won't load that it suppose to load so im confuse on why it won't work and i use my 3ds xl and it work fine with me with the magment but with the 2ds it to difficult to understand since the guide only talk about the 3ds
 
Last edited by MangoMango,

Majickhat55

The Red Woman
Member
Joined
Mar 28, 2016
Messages
4,936
Trophies
1
Age
36
Location
Asshai
XP
2,958
Country
United States
I'm using an 2ds that my brother want to install it so i follow the instructon and here what threw me off it said turn off the consle and turn on sleep mode than press power start slected start and x at the same time and so i did and hold it for a few second and it won't load that it suppose to load so im confuse on why it won't work and i use my 3ds xl and it work fine with me with the magment but with the 2ds it to difficult to understand since the guide only talk about the 3ds
Well is it an original 2DS? Or is it a NEW 2DS that just came out? The original one doesn't need the magnet, it has a switch to enable sleep mode. The NEW 2DS works just like a 3DS would.
 

Majickhat55

The Red Woman
Member
Joined
Mar 28, 2016
Messages
4,936
Trophies
1
Age
36
Location
Asshai
XP
2,958
Country
United States
It's the original

  1. Locate the switch labeled "SLEEP" on the bottom right of the system.
  2. Press the switch all the way to the right. You should see an orange color show up when the switch is pressed all the way to the right.

--------------------- MERGED ---------------------------

  1. Power off your device
  2. Insert your flashcart into your device
  3. On old 2DS, you should enable the sleep mode switch
  4. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
 

MangoMango

Member
OP
Newcomer
Joined
Nov 16, 2017
Messages
12
Trophies
0
Age
23
XP
51
Country
United States
  1. Locate the switch labeled "SLEEP" on the bottom right of the system.
  2. Press the switch all the way to the right. You should see an orange color show up when the switch is pressed all the way to the right.
Ok so now it in sleep mode the power is off and now i do power start select and x at the same time
 

Majickhat55

The Red Woman
Member
Joined
Mar 28, 2016
Messages
4,936
Trophies
1
Age
36
Location
Asshai
XP
2,958
Country
United States
All I can say is double check your files, make sure they are on the 2DS' SD and not the Flashcards..... Try taking the flashcard out and putting it in again, etc.
 

MangoMango

Member
OP
Newcomer
Joined
Nov 16, 2017
Messages
12
Trophies
0
Age
23
XP
51
Country
United States
All I can say is double check your files, make sure they are on the 2DS' SD and not the Flashcards..... Try taking the flashcard out and putting it in again, etc.
If these don't work is there a way to just restart and do it over again by installing ntrboot or no
 

Kubas_inko

"Something funny goes here."
Member
Joined
Feb 3, 2017
Messages
6,324
Trophies
1
Age
24
Location
I gues on earth.
XP
5,176
Country
Czech Republic
If these don't work is there a way to just restart and do it over again by installing ntrboot or no
If you haven't reflashed your flashcard back to stock, it still should be in NTRBoot mode. Just make sure you have all files on SD and try putting thin piece of paper under your flashcard. Sometimes there is not good contact.
 

MangoMango

Member
OP
Newcomer
Joined
Nov 16, 2017
Messages
12
Trophies
0
Age
23
XP
51
Country
United States
If you haven't reflashed your flashcard back to stock, it still should be in NTRBoot mode. Just make sure you have all files on SD and try putting thin piece of paper under your flashcard. Sometimes there is not good contact.
First how do i tell is my flashcard is in ntrboot mode and i tried the piece of paper it didn't work
 

MangoMango

Member
OP
Newcomer
Joined
Nov 16, 2017
Messages
12
Trophies
0
Age
23
XP
51
Country
United States
insert your flashcart into your console and power it on. If the flashcart shows on the home menu in the game cart slot, it means it isn't flashed.
Well everytime i enter my flash card into the consle it dosen't pop up but than when i do the power start selected and x it dosen't turn on or when it dose it dosen't give me the bootstrap but i have all the files i need
insert your flashcart into your console and power it on. If the flashcart shows on the home menu in the game cart slot, it means it isn't flashed with ntrboot.
it's not showing
 

MangoMango

Member
OP
Newcomer
Joined
Nov 16, 2017
Messages
12
Trophies
0
Age
23
XP
51
Country
United States
Yes the microsd is in cause i injected the ntrboothack

--------------------- MERGED ---------------------------

So, it's already flashed. The microsd is in the console and not in the flashcart, correct?
So i have the flashcard flashed cause it not showing up in the home menu and i have the files for the mirocsd i tried the hold power start selected and x but everytime i do that either nothing will happen or it will turn on but will not give me what i want
 

PossiblyOne

Alive For Now
Member
Joined
Oct 28, 2017
Messages
131
Trophies
0
Location
Somewhere
XP
187
Country
United States
Yes it have the files that i need i can even show you the picture if you like

Please, I'm not talking about the files. I'm talking about the physical micro SD card. Did you insert the physical micro sd card into the 2ds or did you insert it into the flashcart?

Judging from what you keep saying, it sounds like it's in the flashcart. If it is, take the physical micro sd card out and put it into the sd slot of the 2ds.
(if anyone can explain this better, be my guest.)
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: https://youtu.be/MddR6PTmGKg?si=mU2EO5hoE7XXSbSr