Hacking Blue screen of death :(

[Jaggred]

EDIT!
Shieeet, Topis should sound "Blue Led of Death"

Hello!
I hope you can help me with my problem.

My configuration is: New 3DS XL with newest Luma3D and 11.2

I fallowed guide and succesfully installed CFW. I was able to succesfully instal CIAs and everything was perfect.

BUT! Today i start my console from Sleep Mode, and screen just Blink and console shut down. Now, when i press power on, Blue led turns on for 2 seconds, speakers make little pop sound and console turns off. If i try start it with DPad up/Start/Select pressed blue led immediatly turns off.



What can i do?

 

[Mazamin]

It sounds like a ribbon cable problem, it's not blue screen of death anyway(bootrom error), but it's strange cause I suppose your console is new
EDIT: Or maybe you're missing some files, but you said it was working so IDK

 

[Jaggred]

yea, i mistakely named topic wrong (to much work with windows )

Ive read somewhere about problem with arm9loaderhax.bin, but my sd looks ok (tried other one and same issue)

 

[Mazamin]

Is your console new? Have you ever dropped it?

 

[proflayton123]

bootrom error? hardmod problem? @vb_encryption_vb @gamesquest1

 

[Mazamin]

bootrom error? hardmod problem? @vb_encryption_vb @gamesquest1

That's not the blue screen of bootrom error, that's a blue led

 

[proflayton123]

That's not the blue screen of bootrom error, that's a blue led

maybe has bad luma download?

 

[ScarletDreamz]

This might sounds really stuppid, but, it might be your sd card that got corrupted. which its causing the led to try to turn on but it does not, and i assume you did not copy arm9loaderhaxbin to ctrnand, might want to try another sd card with the arm9loaderhax.bin from luma in it first ;D

 

[Lumince]

Most likely corrupt luma or corrupt sd card?

 

[DeoNaught]

can you boot into Hourglass or anything?
if not most likely a corrupt SDcard,
to fix that just replace your Luma.bin file try that

 

[vt6446]

That definitely sounds like your ribbon cables are damaged. Have you dropped it or something? I dropped mine recently and it only boots when the screen is half open and my 3ds does the popping sound too if the screen is fully open. Try to turn the console on in different screen angles if that works then you need to replace those cables.

 

[JCCG1989]

First of all check your SD card integrity, it looks like arm9lh cannot be loaded. Then try all the stuff these guys say.

 

[Infidel]

It sounds like a ribbon cable problem, it's not blue screen of death anyway(bootrom error), but it's strange cause I suppose your console is new
EDIT: Or maybe you're missing some files, but you said it was working so IDK

about 99% sure this is your problem as my daughter's o3ds had the exact same symptoms(blue LED comes on for about 2 secs. Speakers pop then the system cuts off) try holding the screen at different positions when you are cutting it on. May work if the ribbon is loose and not detached yet.

 

[CheatFreak47]

In my experience, a popping sound after a solid blue light means a ribbon cable issue, which I've only had happen once and I fixed it myself.

 

[Jaggred]

About Luma problem i had backup of my all files and tries another sd card. No luck.
BUT!
To all. First post from @DrCrygor07 pointed me to ribbon problem. I dissasembly my console. Assemby it again and it start working. Dont know how but ive only touch ribbon. afraid to disconnect ribbons.
Hope it will work for some time.