menuhax_manager v3.0 by yellows8.
Deleting SD data from old menuhax_manager versions, etc...
Opening extdata archives...
Finished opening extdata.
Downloading config via HTTPC...
Parsing config...
menuhax_manager v3.0 by yellows8.
This can install Home Menu haxx to the SD card, for booting the *hax payloads. Select an option with the below menu via the D-Pad/Circle-Pad, then press A. You can press the B button to exit. You can press the Y button at any time while at a menu like the below one, to toggle the screen being used by this app.
The theme menu options are only available when the cfg file exists on SD with an exploit installed which requires seperate theme-data files.
-> Install
Delete
Configure menuhax.
Configure the menuhax splash-screen.
Getting system info...
Detected system-version: Old3DS 11.0.0-33 USA
Skip ropbin-payload setup? Normally you should just press B.
A = Yes, B = No.
Setting up ropbin payload...
Requesting the actual payload URL with HTTPC...
Downloading the actual payload with HTTPC...
Writing the menuropbin to SD...
ropbin_filepath = sdmc:/menuhax/ropbin/ropbinpayload_menuhax_USA25600_old3ds.bin
Copying stage2 to SD...
Src path = 'romfs:/finaloutput/menuhax_payload.zip@menuhax_USA25600_old3ds.bin', dst = 'sdmc:/menuhax/stage2/menuhax_USA25600_old3ds.bin'.
Reading stage2...
Writing stage2...
Installing sdiconhax...
Loading SaveData.dat...
Locating data in Home Menu linearmem heap...
Failed to find the target CTRSDK heap memchunkhdr.
Error from sdiconhax_locatelinearmem(): 0xfffffffe
Trying to load addrs from the built-in list since auto-locate failed...
Running SD setup for stage1...
Loading exploit file-data + writing into extdata...
Install finished successfully.
Press the A button to continue.
menuhax_manager v3.0 by yellows8.
Installed menuhax from the last installation run:
'v3.0:sdiconhax'
This can install Home Menu haxx to the SD card, for booting the *hax payloads. Select an option with the below menu via the D-Pad/Circle-Pad, then press A. You can press the B button to exit. You can press the Y button at any time while at a menu like the below one, to toggle the screen being used by this app.
The theme menu options are only available when the cfg file exists on SD with an exploit installed which requires seperate theme-data files.
-> Install
Delete
Configure menuhax.
Configure the menuhax splash-screen.
menuhax_manager v3.0 by yellows8.
Installed menuhax from the last installation run:
'v3.0:sdiconhax'
This can install Home Menu haxx to the SD card, for booting the *hax payloads. Select an option with the below menu via the D-Pad/Circle-Pad, then press A. You can press the B button to exit. You can press the Y button at any time while at a menu like the below one, to toggle the screen being used by this app.
The theme menu options are only available when the cfg file exists on SD with an exploit installed which requires seperate theme-data files.
Install
-> Delete
Configure menuhax.
Configure the menuhax splash-screen.
menuhax_manager v3.0 by yellows8.
Installed menuhax from the last installation run:
'v3.0:sdiconhax'
This can install Home Menu haxx to the SD card, for booting the *hax payloads. Select an option with the below menu via the D-Pad/Circle-Pad, then press A. You can press the B button to exit. You can press the Y button at any time while at a menu like the below one, to toggle the screen being used by this app.
The theme menu options are only available when the cfg file exists on SD with an exploit installed which requires seperate theme-data files.
Install
Delete
-> Configure menuhax.
Configure the menuhax splash-screen.
Configuring the padcfg file on SD...
The cfg file already exists on SD.
Current cfg:
Type 0x0: None, the default PAD trigger is used.
Current delay value: 3000000000(3.000000 seconds).
The menuhax thread is currently disabled, use the PAD option for it to enable it.
When both the menuhax-thread and Home Menu are active, it will essentially check the specified PAD-value every <delayvalue>, on match it will trigger running the *hax payload.
Press the A button to continue.
Select an option with the below menu. You can press B to exit without changing anything..
-> Type1: Only trigger the haxx when the PAD state matches the specified value(specified button(s) must be pressed).
Type2: Only trigger the haxx when the PAD state doesn't match the specified value.
Type0: Default PAD config is used.
Configure the delay value used with the delay right before jumping to the *hax payload. This may affect the random *hax payload boot failures.
Configure the delay value used with the menuhax thread.
Configure the PAD value for the menuhax thread.
Press the button(s) you want to select for the PAD state value as described above(no New3DS-only buttons). If you want to select <no-buttons>, don't press any buttons. Then, while the buttons are being pressed, if any, touch the bottom-screen.
Selected PAD value: 0x80 D-PAD DOWN
Config file successfully written.
Configuration finished successfully.
Press the A button to continue.
menuhax_manager v3.0 by yellows8.
Installed menuhax from the last installation run:
'v3.0:sdiconhax'
This can install Home Menu haxx to the SD card, for booting the *hax payloads. Select an option with the below menu via the D-Pad/Circle-Pad, then press A. You can press the B button to exit. You can press the Y button at any time while at a menu like the below one, to toggle the screen being used by this app.
The theme menu options are only available when the cfg file exists on SD with an exploit installed which requires seperate theme-data files.
Install
Delete
-> Configure menuhax.
Configure the menuhax splash-screen.
Press the START button to exit.