Hacking [Pre-release, WIP] Yet another rxTools?

[MelonGx]

New bug:
After the data installation, it stopped at full-progress-bar screen.
I pressed A, then it entered the menu, but with absolutely no font display so that I could not do any operation on it. Only the theme graphic filled the screen.
After I restarted the 3DS, the fonts displayed properly though.

BTW:
Someone reported that the new rxTools cannot recognize Sys 9.0 TWN 3DS's emuNAND but old rxTools can.
Dunno about the details.

 

[duke_srg]

Hey guys, is it possible to get Rxtools to EMUnand 11? if so can someone help me with the process . your help would be greatly appreciated

It works as before - firmware.bin of 9.6 required and a key file if on N3DS.

Being that it doesn't actually show an error screen, I am not sure where about it fails.

If filesystem could not be mounted, it hangs with the black screen, any button press will reboot the console. Will add a color screen for that, since no font could be loaded before. The rest should have an error message display.

New bug:
After the data installation, it stopped at full-progress-bar screen.
I pressed A, then it entered the menu, but with absolutely no font display so that I could not do any operation on it. Only the theme graphic filled the screen.
After I restarted the 3DS, the fonts displayed properly though.

BTW:
Someone reported that the new rxTools cannot recognize Sys 9.0 TWN 3DS's emuNAND but old rxTools can.
Dunno about the details.

This happens if font file could not be decrypted or loaded. On clean install there should be 2 consequtive progress bars on boot: first unnamed for font, and second "Decrypting firmware" or also unnamed if font extraction fails. To distinguish which one it was, the first one have a delay on 50%, the second have no delays on N3DS and two delays at 1/3 and 2/3 on O3DS.
If SysNAND is not recognized, it will fail with mounting filesystem. If it boots into GUI, then at least NCSD and CTRNAND partitions was recognized.

To All: Will it be useful to have the option to boot with the NATIVE_FIRM from FIRM partition of *NAND?

 

[Animeman1000]

Keep up the good work.

 

[chronoss]

I just tested it and it is very clean, I eagerly awaiting the release of a9lh version

Thanks @duke_srg for this great resurrection of rxTools

 

[duke_srg]

I just tested it and it is very clean, I eagerly awaiting the release of a9lh version

If you've tested specific features, please don't hesitate to send updates to the compatibility chart
https://github.com/dukesrg/rxTools/blob/New-theme-engine-dev/rxtools/README.md

 

[chronoss]

If you've tested specific features, please don't hesitate to send updates to the compatibility chart
https://github.com/dukesrg/rxTools/blob/New-theme-engine-dev/rxtools/README.md

Ok, i will do it

 

[Domino101]

It works as before - firmware.bin of 9.6 required and a key file if on N3DS.

If filesystem could not be mounted, it hangs with the black screen, any button press will reboot the console. Will add a color screen for that, since no font could be loaded before. The rest should have an error message display.

This happens if font file could not be decrypted or loaded. On clean install there should be 2 consequtive progress bars on boot: first unnamed for font, and second "Decrypting firmware" or also unnamed if font extraction fails. To distinguish which one it was, the first one have a delay on 50%, the second have no delays on N3DS and two delays at 1/3 and 2/3 on O3DS.
If SysNAND is not recognized, it will fail with mounting filesystem. If it boots into GUI, then at least NCSD and CTRNAND partitions was recognized.

To All: Will it be useful to have the option to boot with the NATIVE_FIRM from FIRM partition of *NAND?

im on old 3ds Rxtools 3.0b. i remember their was a rumor going around if you update your emunand with Rxtool you will get a black screen, i wanted to know if that was fixed so i can update

 

[duke_srg]

im on old 3ds Rxtools 3.0b. i remember their was a rumor going around if you update your emunand with Rxtool you will get a black screen, i wanted to know if that was fixed so i can update

I successfully updated EmuNAND to 11.0 on my O3DS with firmware.bin from 9.6 (00000049)

Progress:
- On FS/NAND mount fail it will hang with red screen now.
- Obvious job progress cancel and finish confirm.

 

[dubbz82]

Awesome progress..can't wait to see this get up to speed and have support for a9lh.

 

[shawn_]

Awesome progress..can't wait to see this get up to speed and have support for a9lh.

Agreed! Been waiting for the RXtools comeback with A9LH support. Great work!

 

[oresterosso]

There are problems in the choice of language.
per the moment the only solution is to translate gui.json

 

[duke_srg]

There are problems in the choice of language.
per the moment the only solution is to translate gui.json

gui.json must not be translated by itself, all translations must be inside /lang/*.json files. There are only partly Russian and Spanish translation exists for now, the rest json files only have translations from the old rxtools just for compatibility unless console us completely removed from the project. So what was the problem?

 

[oresterosso]

gui.json must not be translated by itself, all translations must be inside /lang/*.json files. There are only partly Russian and Spanish translation exists for now, the rest json files only have translations from the old rxtools just for compatibility unless console us completely removed from the project. So what was the problem?

the problem is the following:
They select the language settings but the same does not work.
the gui is not translated.

 

[duke_srg]

the problem is the following:
They select the language settings but the same does not work.
the gui is not translated.

This is because only es.json and ru.json only contains translation, there are no translation to other languages and help is welcome.

 

[oresterosso]

This is because only es.json and ru.json only contains translation, there are no translation to other languages and help is welcome.

where are these translated files?
I tried to set Spanish but it did not work.

 

[duke_srg]

where are these translated files?
I tried to set Spanish but it did not work.

/rxtools/lang/
Check with Russian, works for sure
Settings is Настройки if you lost after changing

 

[oresterosso]

/rxtools/lang/
Check with Russian, works for sure
Settings is Настройки if you lost after changing

nothing does not work!
I wonder if the problem can be caused by sysnand 4.5.0 8
I start from the CFW ds profile, but it is strange that everything else works.

 

[duke_srg]

nothing does not work!
I wonder if the problem can be caused by sysnand 4.5.0 8
I start from the CFW ds profile, but it is strange that everything else works.

When you go to Settings and press A on Language option - does the option value changes?

 

[Deleted member 373223]

why don't you ask @d0k3 for a9lh?

 

[oresterosso]

When you go to Settings and press A on Language option - does the option value changes?

yes, however, the translation of the gui does not take place