Emulation [RELEASE] Cemu - Wii U emulator

[Master-Killua]

Noob question: Is the CPU really important for the Speed?Or the GPU does?
I was thinking about buying a i7 6700k (without a GPU).
I have a A8 5600k @ 3.8 Ghz (4 cores), and a r7 250 but I get slow FPS with games like Mario Kart 8 or Zelda WW.
If I buy a new GPU (gtx 970 for example), would I get full speed? Or should I buy a CPU for more FPS? (6700k)

 

[chriztr]

Noob question: Is the CPU really important for the Speed?Or the GPU does?
I was thinking about buying a i7 6700k (without a GPU).
I have a A8 5600k @ 3.8 Ghz (4 cores), and a r7 250 but I get slow FPS with games like Mario Kart 8 or Zelda WW.
If I buy a new GPU (gtx 970 for example), would I get full speed? Or should I buy a CPU for more FPS? (6700k)

Most emulators are CPU hungry since they are infact makeing a whole other system work on a computer, so I would go by upgrading the CPU first!

 

[badspot]

Noob question: Is the CPU really important for the Speed?Or the GPU does?
I was thinking about buying a i7 6700k (without a GPU).
I have a A8 5600k @ 3.8 Ghz (4 cores), and a r7 250 but I get slow FPS with games like Mario Kart 8 or Zelda WW.
If I buy a new GPU (gtx 970 for example), would I get full speed? Or should I buy a CPU for more FPS? (6700k)

CPU i believe

 

[zeldor711]

Is it normal for Mario Kart 8 to run at half speed? It says it is running at 30 fps but I just assumed it would skip the frames instead of slowing down the game?

 

[chriztr]

Is it normal for Mario Kart 8 to run at half speed? It says it is running at 30 fps but I just assumed it would skip the frames instead of slowing down the game?

Depends on what hardware you've got.

 

[zeldor711]

Guess my i5 3330s gonna have to wait for some optimizations . Would be nice to have a frameskip feature though

 

[ned]

I think vram is probably most important to maintain over 30fps, at it best only really uses 60-80% cpu load on my i5 so raw cpu power doesn't seem to be the issuse, where as it uses the full 1gb vram on my nvs4200m with 100% constant gpu load.

 

[LawnMeower]

Is it normal for Mario Kart 8 to run at half speed? It says it is running at 30 fps but I just assumed it would skip the frames instead of slowing down the game?

MK8 is a 60fps game

 

[Gundark]

Funny that I'm using a Nvidia GPU then.

It works, but the fps is crap, I get around 20 fps in MK8 with my Intel HD 530, compared to 45-60 when using my GTX 970M. Also, there are graphical glitches:View attachment 45331

Didn't know that NVidia is affected too.

 

[chriztr]

Didn't know that NVidia is affected too.

Seems like to be. But it has only happend once.

 

[Darkemaste]

Find a guy name @ArthurC (by find, I mean look at his recent posts), and find that MK8 save or just look at my 1.3 video of MK8 with save and read the description.

Thanks! Finally have all the courses unlocked, bonus MK8 Electrodome video-



Also SM3DW video if anyone is interested-

 

[Blue]

Anyone have a reccommended config to use with an Xbox 360 Controller? For playing NSMBU.

 

[chriztr]

Anyone have a reccommended config to use with an Xbox 360 Controller? For playing NSMBU.

Assign the buttons as they are? It's working fine for me.

 

[Blue]

Assign the buttons as they are? It's working fine for me.

I can do that but I don't know which buttons I should assign. Could you send me yours, please.

 

[chriztr]

I'm at the laptop right now, sorry.
But you could assign A = A, B=B, Y=Y, X=X, L=left shoulder, R=right shoulder, ZL=left shoulder again, ZR=right shoulder again, +=start, -=select/back, and d-up, down, left, right as d-up, down, left, right.

 

[HaloEffect17]

Yes you can. I use my MayFlash Dolphin Bar with Touchmote using it as a X360 Controller. You don't need DolphinBar, just install Touchmote and configure it.
I played it perfectly with Mario Maker on my TV, using the IR pointer for make a level. It's really awesome.

Ok, here's my issue. Cemu sees the Wiimote as shown below. The problem is when I want to assign the buttons to it in the application, pressing for example 'A' does nothing. I click the box I want to assign 'A' to, the cursor blinks, and I press 'A' on the Wiimote and nothing shows up on screen. What do I do?

 

[Master-Killua]

Ok, here's my issue. Cemu sees the Wiimote as shown below. The problem is when I want to assign the buttons to it in the application, pressing for example 'A' does nothing. I click the box I want to assign 'A' to, the cursor blinks, and I press 'A' on the Wiimote and nothing shows up on screen. What do I do?

View attachment 46004

I made a tutorial (in spanish) but it's understable for use the Wiimote in CEMU

 

[Smoker1]

Yes you can. I use my MayFlash Dolphin Bar with Touchmote using it as a X360 Controller. You don't need DolphinBar, just install Touchmote and configure it.
I played it perfectly with Mario Maker on my TV, using the IR pointer for make a level. It's really awesome.

Using Win 7. Did a Search on that App. 1.9 Stars out of 5? I'll wait

 

[Jobenblue]

Has the stuttering issue with Nvidia been recognized? @darkmaste, the video hack works for me as well. 30fps vs 60fps with video, minus the stuttering and consequent frame hits.

 

[HaloEffect17]

I made a tutorial (in spanish) but it's understable for use the Wiimote in CEMU

Thanks. I followed your steps exactly, but in the Xbox 360 profile in Cemu, it says not connected. In the other Xbox 360 profile that you didn't use in the video however says connected for me, but I still can't input keys. Might you have a solution?