I only followed the instructions to copy the ntr.bin to the SD card. Where can I get the firmware.bins?It should be assuming you have the right firmware.bins
What cfw are you using to boot into reinand ? If you using AuReiNand make sure you have 10.2 native_firm as firmware.bin so NTR can bootI only followed the instructions to copy the ntr.bin to the SD card. Where can I get the firmware.bins?
I have regular reiNAND, and I use coldboot menuhax from sysNAND.What cfw are you using to boot into reinand ? If you using AuReiNand make sure you have 10.2 native_firm as firmware.bin so NTR can boot
ReiNAND uses the 10.2 FIRM, iirc.I have regular reiNAND, and I use coldboot menuhax from sysNAND.
Oh, then you are able to use NTR firmware, just put NTR.bin on root of SD and install BootNTR.cia then run it to load NTR CFWI have regular reiNAND, and I use coldboot menuhax from sysNAND.
Okay, thanks!OP, are you using Shadowtrance's fork of NTR?
If not, you need to:
https://github.com/Shadowtrance/BootNTR/releases
What's the difference between this build and Shadowtrance's build? His supports the latest firmware with the 10.2 FIRM as well.Alternatively you can try my build which I did post in the NTR CFW thread.
https://dl.dropboxusercontent.com/u/1078975/BootNTR-a5870fc.zip
It's built from the original author's latest code and works on 10.7 assuming you are using 10.2 firm. I tested it on AuReiNand and I believe someone confirmed it working on Rxtools. I see no reason why it shouldn't work on ReiNand.
Any way you can get it to work with the 10.4 FIRM?Well for some reason on his when I tried to load another app or game after the first it would usually get stuck at the 3DS loading screen for unknown reasons. I have yet to experience that on mine. The ntr.dat file I included is the same as the one in 3.2. It isn't the larger version included in Shadowtrance's 3.3-3D release.
Please do!One would have to debug to find where the patches would need to go. If I were to do it I'd probably want to go ahead and do it for both the N3DS and the O3DS. I do have an O3DS sitting here... I would just need to install a9lh or do menuhax.
First we need to know what FIRM Gateway uses.I use Gateway - what NTR CFW should I use?
And what is the difference between auto-exit and the normal version of Shadowtrance's fork?
First we need to know what FIRM Gateway uses.
10.2/9.6 or 10.4?
GW uses 10.2, i checked it earlier (i have a GW card).First we need to know what FIRM Gateway uses.
10.2/9.6 or 10.4?