Homebrew postLoader4

[MassiveRican]

Suddenly I'm having issues booting neek2o now. Priibooter keeps moving my pl_us nand into some folder called backup with a whole bunch of numbers, and it keeps moving ticket/title/shared2/etc. to the root of my USB drive, where I DON'T want it. Any idea what's going on? It's getting really frustrating.

Actually I was having these same issues when I explained that PL was having some kind of problem switching NANDS, I wasn't sure if it was a Neek2o or PL problem.

 

[DEFIANT]

lol Pacman, I know, I know...

I have all the required roms and it still crash dumps on me?

Even in the homebrew channel, though I never run my apps or games from there. So I can't confirm if it ever worked from there.

I tried your debug from a while ago and it also crash dumps. I can't think of why all of sudden it's crashing. I had it working, oh... about 5 builds ago. I'll go back and try there.

Great, today it crash also to me, with an isi exception (?). The good point is that it do the same also from hbc...

SEE! I'm not crazy!

 

[AbdallahTerro]

4.04 still codedumps when exiting a homebrew.
might be a memory issue

 

[stfour]

4.04 still codedumps when exiting a homebrew.
might be a memory issue

the problem is that it is the homebrew to crash, it isn't postloader or forwarder. Also postloader should leave all clear, and the worst
I can't reproduce the error....

 

[AbdallahTerro]

I can try to test will the full debug (slow) version if you have one around

 

[stfour]

I can try to test will the full debug (slow) version if you have one around

I have not yet it... the problem is that it isn't postloader to crash... but you can try one thing... try to replace postloader saved stub with this one

http://code.google.com/p/priiloader/source/browse/trunk/priiloader/data/stub.bin

 

[AbdallahTerro]

I can try to test will the full debug (slow) version if you have one around

I have not yet it... the problem is that it isn't postloader to crash... but you can try one thing... try to replace postloader saved stub with this one

http://code.google.c...r/data/stub.bin

no luck either, I even tried a clean install this time. same dump

 

[stfour]

But every hb crash on return or only the previous listed ?

 

[stfour]

Suddenly I'm having issues booting neek2o now. Priibooter keeps moving my pl_us nand into some folder called backup with a whole bunch of numbers, and it keeps moving ticket/title/shared2/etc. to the root of my USB drive, where I DON'T want it. Any idea what's going on? It's getting really frustrating.

Actually I was having these same issues when I explained that PL was having some kind of problem switching NANDS, I wasn't sure if it was a Neek2o or PL problem.

Ok, I've checked.... Neek2o nands must be changed inside neek2o. On real nand postLoader will move the selected nand to the root. This is the old way to change nands. Before overwriting the current nand in the root, postloader will make a backup... This way was added to support the original uneek that wasn't able to choose directly nand path as neek2o.

I think this feature is ready to be removed from postloader

 

[stfour]

lol Pacman, I know, I know...

I have all the required roms and it still crash dumps on me?

Even in the homebrew channel, though I never run my apps or games from there. So I can't confirm if it ever worked from there.

I tried your debug from a while ago and it also crash dumps. I can't think of why all of sudden it's crashing. I had it working, oh... about 5 builds ago. I'll go back and try there.

Great, today it crash also to me, with an isi exception (?). The good point is that it do the same also from hbc...

SEE! I'm not crazy!

Try this

http://postloader.fr...oads/pacman.zip

(fixed a bug on pad init, added 480p mode, newer wiimotes should be supported)

and let me known

 

[DEFIANT]

It works...Yhea!!!

 

[stfour]

nice, I'm asking how it was previously working, and why it stopped... first thought was for the gamecube controller, but the original pacman doesn't work more even if I disconnect it. I will upload mod sources soon.

 

[DEFIANT]

Thanks for getting this working again. You are the man.

Will I have to compile it for myself? You sent me a debug dol right or can I just use that?

 

[stfour]

No no, you can use it, it has just usb geko output (but if you haven't usb geko it isn't activated)

 

[AbdallahTerro]

But every hb crash on return or only the previous listed ?

just few hb games codedump, most hb just exit fine to SM.
No hb goes back to PL upon exit

 

[stfour]

But every hb crash on return or only the previous listed ?

just few hb games codedump, most hb just exit fine to SM.
No hb goes back to PL upon exit

 

[AbdallahTerro]

 

[stfour]

@AbdallahTerro, can you make a log with this version ?

http://postloader.freehosting.com/downloads/pl404test.zip

 

[AbdallahTerro]

test version log 1st run set. Edit gui > exit to SM
Second run WiiXball > codedump:

Spoiler

-[postLoader 4.0.4]----------------------------------------
Device 0->sd
Device 1->usb
Device 2->usb2
Device 3->(null)
Device 4->(null)
Default device is 'sd'
sd://ploader/stub.bin loaded succesfully
RestoreChannelNeek2o (begin)
neek_RestoreNandForChannel: unlink of 'usb://sneek/nandpath.bin'->-1
RestoreChannelNeek2o (end)
neek = 0
Autoboot = 0
vars.tempPath = sd://ploader/temp
Showing gui....
Video_LoadTheme(1)
theme.bkg = 0x8147EAB8
theme.frame = 0x8122FE30
theme.frameSel = 0x81249008
theme.frameBack = 0x8125BA88
grlibSettings.theme.texButton = 0x8124B5F0
grlibSettings.theme.texButtonSel = 0x8125C550
grlibSettings.theme.texWindow = 0x81464710
grlibSettings.theme.texWindowBk = 0x0
cfg_Alloc (sd://ploader/theme/theme.cfg, 0)
cfg_Alloc: open ok
cfg_Alloc: completed
grlibSettings.theme.windowMagX = 5
grlibSettings.theme.windowMagY = 15
grlibSettings.theme.buttonMagX = 3
grlibSettings.theme.buttonMagY = 3
grlibSettings.theme.buttonsTextOffsetY = 1
grlibSettings.fontReverse = 0
theme.line1Y = 410
theme.line2Y = 433
theme.line3Y = 450
CoverCache_Start
snd_Init
wiiload.op =AppsFree
InitializeGui 1
y !
net_init_async 0
AppsFree
net_get_status -16
net_get_status -16
net_get_status 0
wiiload.op = StartWiiLoadServer begin
wiiload.op = net_accept
ScanApps completed!
ScanApps: searching 'usb://apps/'
> fails
ScanApps completed!
AppSort (begin)
AppSort (end)
AppsFree
Video_LoadTheme(0)
Video_LoadTheme(0)
CoverCache_Flush
CoverCache_Flush: 79 covers flushed
DolBootPrepare sd:/apps/Settings Editor GUI/boot.dol (sd:/apps/Settings Editor GUI/boot.dol
Shutdown !
snd_Stop
StubLoad()
stubID[0] = 0x38000000, stubID[1] = 0x38600000
STUB 0x0 0x14 0x0 0xC
stub not found...
ConfigWrite()
ConfigWrite: sd://ploader/ploader.cfg
CoverCache_Stop
CoverCache_Flush
CoverCache_Flush: 0 covers flushed
WiiLoad_Stop
wiiload.op = exiting gecko thread...
WiiLoad_Stop: done...
stopping controllers
stopping debug
-[postLoader 4.0.4]----------------------------------------
Device 0->sd
Device 1->usb
Device 2->usb2
Device 3->(null)
Device 4->(null)
Default device is 'sd'
sd://ploader/stub.bin loaded succesfully
RestoreChannelNeek2o (begin)
neek_RestoreNandForChannel: unlink of 'usb://sneek/nandpath.bin'->-1
RestoreChannelNeek2o (end)
neek = 0
Autoboot = 0
vars.tempPath = sd://ploader/temp
Showing gui....
Video_LoadTheme(1)
theme.bkg = 0x8147EAB8
theme.frame = 0x8122FE30
theme.frameSel = 0x81249008
theme.frameBack = 0x8125BA88
grlibSettings.theme.texButton = 0x8124B5F0
grlibSettings.theme.texButtonSel = 0x8125C550
grlibSettings.theme.texWindow = 0x81464710
grlibSettings.theme.texWindowBk = 0x0
cfg_Alloc (sd://ploader/theme/theme.cfg, 0)
cfg_Alloc: open ok
cfg_Alloc: completed
grlibSettings.theme.windowMagX = 5
grlibSettings.theme.windowMagY = 15
grlibSettings.theme.buttonMagX = 3
grlibSettings.theme.buttonMagY = 3
grlibSettings.theme.buttonsTextOffsetY = 1
grlibSettings.fontReverse = 0
theme.line1Y = 410
theme.line2Y = 433
theme.line3Y = 450
CoverCache_Start
snd_Init
wiiload.op =AppsFree
InitializeGui 1
y !
net_init_async 0
AppsFree
net_get_status -16
net_get_status -16
net_get_status 0
wiiload.op = StartWiiLoadServer begin
wiiload.op = net_accept
ScanApps completed!
ScanApps: searching 'usb://apps/'
> fails
ScanApps completed!
AppSort (begin)
AppSort (end)
AppsFree
Video_LoadTheme(0)
Video_LoadTheme(0)
CoverCache_Flush
CoverCache_Flush: 79 covers flushed
DolBootPrepare sd:/apps/wiixball/boot.dol (sd:/apps/wiixball/boot.dol
Shutdown !
snd_Stop
StubLoad()
stubID[0] = 0x38000000, stubID[1] = 0x38600000
STUB 0x0 0x14 0x0 0xC
stub not found...
ConfigWrite()
ConfigWrite: sd://ploader/ploader.cfg
CoverCache_Stop
CoverCache_Flush
CoverCache_Flush: 0 covers flushed
WiiLoad_Stop
wiiload.op = exiting gecko thread...
WiiLoad_Stop: done...
stopping controllers
stopping debug

official version log running a dozen of hb most exit to SM:

Spoiler

-[postLoader 4.0.2]----------------------------------------
Device 0->sd
Device 1->usb
Device 2->usb2
Device 3->(null)
Device 4->(null)
Default device is 'sd'
sd://ploader/stub.bin loaded succesfully
RestoreChannelNeek2o (begin)
neek_RestoreNandForChannel: unlink of 'usb://sneek/nandpath.bin'->-1
RestoreChannelNeek2o (end)
neek = 0
Autoboot = 0
vars.tempPath = sd://ploader/temp
Showing gui....
Video_LoadTheme(1)
theme.bkg = 0x8147D158
theme.frame = 0x8122E4D0
theme.frameSel = 0x812476A8
theme.frameBack = 0x8125A128
grlibSettings.theme.texButton = 0x81249C90
grlibSettings.theme.texButtonSel = 0x8125ABF0
grlibSettings.theme.texWindow = 0x81462DB0
grlibSettings.theme.texWindowBk = 0x0
cfg_Alloc (sd://ploader/theme/theme.cfg, 0)
cfg_Alloc: open ok
cfg_Alloc: completed
grlibSettings.theme.windowMagX = 5
grlibSettings.theme.windowMagY = 15
grlibSettings.theme.buttonMagX = 3
grlibSettings.theme.buttonMagY = 3
grlibSettings.theme.buttonsTextOffsetY = 1
grlibSettings.fontReverse = 0
theme.line1Y = 410
theme.line2Y = 433
theme.line3Y = 450
CoverCache_Start
snd_Init
wiiload.op =AppsFree
InitializeGui 1
y !
net_init_async 0
AppsFree
net_get_status -16
net_get_status -16
net_get_status 0
wiiload.op = StartWiiLoadServer begin
wiiload.op = net_accept
ScanApps completed!
ScanApps: searching 'usb://apps/'
> fails
ScanApps completed!
AppSort (begin)
AppSort (end)
DrawBottomBar: searching sd://apps/SettingsEditorGUI/boot.dol
DrawBottomBar: searching sd://apps/Settings Editor GUI/boot.dol
DrawBottomBar: found!
DrawBottomBar: searching sd://apps/wiimod/boot.dol
DrawBottomBar: found!
AppsFree
AppBrowser
AppsFree
InitializeGui 1
AppsFree
ScanApps: searching 'sd://apps/'
ScanApps completed!
ScanApps: searching 'usb://apps/'
> fails
ScanApps completed!
AppSort (begin)
AppSort (end)
pass = (0)
read_message->contentLenght = 59513
read_message->headersize = 298
read_message->contentLenght = 1297511
read_message->headersize = 362
AutoUpdate http://postloader.go...pdate.4.0.4.zip -> 1297511
fsop_CreateFolderTree (sd://ploader/temp/update/, 5, 25)
ZipUnpack source: sd://ploader/temp/update.zip
ZipUnpack target: sd://ploader/temp/update/
ZipUnpack opening: 0x8150BC28
fsop_CreateFolderTree (sd://ploader/temp/update//apps/, 5, 31)
fsop_CreateFolderTree (sd://ploader/temp/update//apps/postloader/, 5, 42)
fsop_GetFolderBytes->checking sd://ploader/temp/update//apps/postloader/boot.dol
fsop_GetFolderBytes->checking sd://ploader/temp/update//apps/postloader/icon.png
fsop_GetFolderBytes->checking sd://ploader/temp/update//apps/postloader/meta.xml
fsop_GetFolderBytes->checking sd://ploader/temp/update//historii.txt
fsop_CopyFolder
fsop_CopyFolder: source 'sd://ploader/temp/update/'
fsop_CopyFolder: target 'sd://'
fsop.multy.startms = 108695
fsop.multy.bytes = 0
fsop.multy.size = 2272764 (2 Mb)
fsop_CopyFile (sd://ploader/temp/update//apps/postloader/boot.dol, sd:///apps/postloader/boot.dol): Started
fsop_CopyFile: buffer size changed to 64Kbyte
fsop_CopyFile: bytes 2205632, size 2205632, err 0, breakop 0
fsop_CopyFile (sd://ploader/temp/update//apps/postloader/icon.png, sd:///apps/postloader/icon.png): Started
fsop_CopyFile: buffer size changed to 64Kbyte
fsop_CopyFile: bytes 4608, size 4608, err 0, breakop 0
fsop_CopyFile (sd://ploader/temp/update//apps/postloader/meta.xml, sd:///apps/postloader/meta.xml): Started
fsop_CopyFile: buffer size changed to 64Kbyte
fsop_CopyFile: bytes 3011, size 3011, err 0, breakop 0
fsop_CopyFile (sd://ploader/temp/update//historii.txt, sd:///historii.txt): Started
fsop_CopyFile: buffer size changed to 64Kbyte
fsop_CopyFile: bytes 59513, size 59513, err 0, breakop 0
fsop_GetFolderBytes->checking sd://ploader/temp/update//apps/postloader/boot.dol
fsop_GetFolderBytes->checking sd://ploader/temp/update//apps/postloader/icon.png
fsop_GetFolderBytes->checking sd://ploader/temp/update//apps/postloader/meta.xml
fsop_GetFolderBytes->checking sd://ploader/temp/update//historii.txt
fsop_CopyFolder
fsop_CopyFolder: source 'sd://ploader/temp/update/'
fsop_CopyFolder: target 'usb://'
fsop.multy.startms = 117132
fsop.multy.bytes = 0
fsop.multy.size = 2272764 (2 Mb)
fsop_CopyFile (sd://ploader/temp/update//apps/postloader/boot.dol, usb:///apps/postloader/boot.dol): Started
fsop_CopyFile: buffer size changed to 64Kbyte
fsop_CopyFile: bytes 2205632, size 2205632, err 0, breakop 0
fsop_CopyFile (sd://ploader/temp/update//apps/postloader/icon.png, usb:///apps/postloader/icon.png): Started
fsop_CopyFile: buffer size changed to 64Kbyte
fsop_CopyFile: bytes 4608, size 4608, err 0, breakop 0
fsop_CopyFile (sd://ploader/temp/update//apps/postloader/meta.xml, usb:///apps/postloader/meta.xml): Started
fsop_CopyFile: buffer size changed to 64Kbyte
fsop_CopyFile: bytes 3011, size 3011, err 0, breakop 0
fsop_CopyFile (sd://ploader/temp/update//historii.txt, usb:///historii.txt): Started
fsop_CopyFile: buffer size changed to 64Kbyte
fsop_CopyFile: bytes 59513, size 59513, err 0, breakop 0
Video_LoadTheme(0)
CoverCache_Flush
CoverCache_Flush: 32 covers flushed
DolBootPrepare sd://apps/postloader/boot.dol (sd://apps/postloader/boot.dol
Shutdown !
snd_Stop
ConfigWrite()
ConfigWrite: sd://ploader/ploader.cfg
CoverCache_Stop
CoverCache_Flush
CoverCache_Flush: 0 covers flushed
WiiLoad_Stop
wiiload.op = exiting gecko thread...
WiiLoad_Stop: done...
stopping controllers
stopping debug
-[postLoader 4.0.4]----------------------------------------
Device 0->sd
Device 1->usb
Device 2->usb2
Device 3->(null)
Device 4->(null)
Default device is 'sd'
sd://ploader/stub.bin loaded succesfully
RestoreChannelNeek2o (begin)
neek_RestoreNandForChannel: unlink of 'usb://sneek/nandpath.bin'->-1
RestoreChannelNeek2o (end)
neek = 0
Autoboot = 0
vars.tempPath = sd://ploader/temp
Showing gui....
Video_LoadTheme(1)
theme.bkg = 0x8147EAB8
theme.frame = 0x81337660
theme.frameSel = 0x81249248
theme.frameBack = 0x8125BB68
grlibSettings.theme.texButton = 0x8124B830
grlibSettings.theme.texButtonSel = 0x8125C630
grlibSettings.theme.texWindow = 0x81464710
grlibSettings.theme.texWindowBk = 0x0
cfg_Alloc (sd://ploader/theme/theme.cfg, 0)
cfg_Alloc: open ok
cfg_Alloc: completed
grlibSettings.theme.windowMagX = 5
grlibSettings.theme.windowMagY = 15
grlibSettings.theme.buttonMagX = 3
grlibSettings.theme.buttonMagY = 3
grlibSettings.theme.buttonsTextOffsetY = 1
grlibSettings.fontReverse = 0
theme.line1Y = 410
theme.line2Y = 433
theme.line3Y = 450
CoverCache_Start
snd_Init
wiiload.op =AppsFree
InitializeGui 1

---

 

[stfour]

The stub is not correct... it is loaded fine at the beginning... but then postloader is unable to patch it as don't recognize it.

The stub.bin (that is fine) you sent to me was from sd or usb ? You think pl is running in sd or usb ?