Hardware Hall Effect sensor joycon sticks on Amazon

[jelbo]

I put in the AKNES TMR sticks (model AK201, ver 3.3 printed on the flatcable) and I have the problem with the random stick movement after waking up my Switch...

3. When turn on Switch, the joystick will input randomly until touch it, then it will return to normal?​

This problem is found on both GuliKit TMR and AKNES HallPi TMR.

We have tested and ruled out many reasons such as joycon model, battery, joystick itself, but we cannot find the specific cause.

Usually, it can be restored by swapping your left and right joysticks or replacing a new joystick. And the abnormal joystick can also work normally on other Joycon.

If you encounter this problem, please contact your seller for after-sales service/support.

What a shame! It makes my Joy Cons worse than they were.. If I had known this, I would have chosen the Hall Effect ones. I bought them from the AKNES AliExpress store.

 

[worm28]

I bought two paires of hall effect sticks for my two switches and i love them no drift the only problem i had was the ribbon cables are hard to fit in the joycons i ended up breaking one and had to order new hall effect sticks.

 

[impeeza]

I bought two paires of hall effect sticks for my two switches and i love them no drift the only problem i had was the ribbon cables are hard to fit in the joycons i ended up breaking one and had to order new hall effect sticks.

Humm, the ones from Aknes are a direct replacement of the original ones, the ribbon cables are exactly the same than original, have the exact same length and wide.

 

[worm28]

Humm, the ones from Aknes are a direct replacement of the original ones, the ribbon cables are exactly the same than original, have the exact same length and wide.

Maybe its just me im not to savvy at hardware mods i seem to break stuff.

 

[impeeza]

Maybe its just me im not to savvy at hardware mods i seem to break stuff.

you and me, Please do not make me to start with all the ribbon cables of the lateral buttons of the joycons I had breaking.

 

[AKNES]

I put in the AKNES TMR sticks (model AK201, ver 3.3 printed on the flatcable) and I have the problem with the random stick movement after waking up my Switch...


What a shame! It makes my Joy Cons worse than they were.. If I had known this, I would have chosen the Hall Effect ones. I bought them from the AKNES AliExpress store.

https://aknes.com/pages/faq-gk-ns40t
Sorry
Please check Q3/A3
This is a problem discovered during testing, but the cause cannot be ruled out.
Please contact our colleagues on the platform and ask them to send a new pair.
Sorry again!

 

[jelbo]

This is a problem discovered during testing, but the cause cannot be ruled out.

Does this information help? https://github.com/CTCaer/hekate/issues/1142

 

[AKNES]

Does this information help? https://github.com/CTCaer/hekate/issues/1142

Hey thank you so much!
We eventually found out that NS had changed some calibration details.
We are already working on solving this problem.

 

[jelbo]

Hey thank you so much!
We eventually found out that NS had changed some calibration details.
We are already working on solving this problem.

Very nice! Could it be fixed with a software solution, like an exefs_patch?

 

[AKNES]

Very nice! Could it be fixed with a software solution, like an exefs_patch?

No, return to factory for upgrade

 

[SaudiCraft]

Hey thank you so much!
We eventually found out that NS had changed some calibration details.
We are already working on solving this problem.

Isn't this just Nintendo's way of saying they don't want your third party sticks to be used in their console?

 

[burhansalih]

Yep I used these and i raised the issue about the drifting in Hekate on his post...in the end i gave up and went back to original NS Sticks.

Post automatically merged: Dec 19, 2025

@AKNES are you able to sort me out...i brought 2 sets from Amazon UK?

 

[postnein]

No, return to factory for upgrade

Post automatically merged: Dec 19, 2025

I have these and have a weird fix. Each time the Switch wakes, they will do the weird random movement. However, quickly rotation each one sorts out my issue. I tried everything, even thinking it was my screen with phantom touches.

Post automatically merged: Dec 19, 2025

Post automatically merged: Dec 19, 2025

I have these and have a weird fix. Each time the Switch wakes, they will do the weird random movement. However, quickly rotation each one sorts out my issue. I tried everything, even thinking it was my screen with phantom touches.

 

[AKNES]

Yep I used these and i raised the issue about the drifting in Hekate on his post...in the end i gave up and went back to original NS Sticks.

Post automatically merged: Dec 19, 2025

@AKNES are you able to sort me out...i brought 2 sets from Amazon UK?

Thank you for your purchase!
What problem did you encounter?
Don't worry, I will provide after-sales service/support!

 

[burhansalih]

Thank you for your purchase!
What problem did you encounter?
Don't worry, I will provide after-sales service/support!

The problem I had is that I purchased 2 sets and both sets drift even after Nintendo calibration in the setting the right side is ok the left always drifts.

 

[AKNES]

Post automatically merged: Dec 19, 2025

I have these and have a weird fix. Each time the Switch wakes, they will do the weird random movement. However, quickly rotation each one sorts out my issue. I tried everything, even thinking it was my screen with phantom touches.

Post automatically merged: Dec 19, 2025

Hi sorry for the issue
Where did you purchase it from?
If AKNES, please let me know, i'll provide after-sale service.

Post automatically merged: Dec 22, 2025

The problem I had is that I purchased 2 sets and both sets drift even after Nintendo calibration in the setting the right side is ok the left always drifts.

Sorry for that!
Did you purchase them from AKNES?
If so, please let me know, i'll provide after-sale service/support!

 

[postnein]

Hi sorry for the issue
Where did you purchase it from?
If AKNES, please let me know, i'll provide after-sale service.

Post automatically merged: Dec 22, 2025

Sorry for that!
Did you purchase them from AKNES?
If so, please let me know, i'll provide after-sale service/support!

they are Aknes. It's all good. The issue is only after the console wakes. After rotating both sticks the issues goes away.

 

[AKNES]

they are Aknes. It's all good. The issue is only after the console wakes. After rotating both sticks the issues goes away.

In fact, they were a problem as well.
Our new version has fixed this (according to the new calibration protocol).

So if you don't mind, please DM me your order number, shipping address, and phone number.
I'll send you a new pair.

DM jim on Discord is also fine.

 

[Nono74]

Hi.
Do you only sell the new, corrected version ?
Or do you still have stock of the older version ?
I just received 5 packs from your store and I'm wondering if it's possible to know the version before installation ?
Thanks.

 

[burhansalih]

Hi sorry for the issue
Where did you purchase it from?
If AKNES, please let me know, i'll provide after-sale service.

Post automatically merged: Dec 22, 2025

Sorry for that!
Did you purchase them from AKNES?
If so, please let me know, i'll provide after-sale service/support!

@AKNES I purchased both sets from AMAZON UK.