Hacking SWITCH NOOB PARADISE - Ask questions here

[Myst0gan]

I was reading this guide for mariko boards, just curious, what does sx_gear do??

 

[Gustavo24104]

How do I update and install DLC for physical games? Can I just install them with tinfoil?
followup question: is there any risk in doing this? Some guy told me that using phyisical games on the emunand would get me banned, but I doubt so

thank you!

 

[Deleted member 565746]

Can anyone send link to latest version of HWFLY and Picofly ? I have Mariko v2

 

[huysolo]

Is there any way for me to connect my Retroflag controller with the Switch on Lineageos 18.1? The OS seems to not recognize the controller at all

 

[Maxterjam]

Hi Guys.

I need a little help with a doubt i have about picofly. I´m planning to install the hwfly rp2040 chip i ordered from AliE into my switch lite. I have watched lots of videos about the installation, i have the tools and a little experience with micro soldering. The thing is that i have read some threads and messages here about people having black screens after inserting the micro SD with the files in the switch and the console does not boot after that even by removing the chip, and i dont want that to happen of course. My question is: Can a malfunctioning chip damage the console to the point it does not boot anymore or it was caused by a poor installation or a short circuit the installer caused? Any advices or things to take into account before proceeding with the installation? Thanks.

 

[Myst0gan]

Hi Guys.

I need a little help with a doubt i have about picofly. I´m planning to install the hwfly rp2040 chip i ordered from AliE into my switch lite. I have watched lots of videos about the installation, i have the tools and a little experience with micro soldering. The thing is that i have read some threads and messages here about people having black screens after inserting the micro SD with the files in the switch and the console does not boot after that even by removing the chip, and i dont want that to happen of course. My question is: Can a malfunctioning chip damage the console to the point it does not boot anymore or it was caused by a poor installation or a short circuit the installer caused? Any advices or things to take into account before proceeding with the installation? Thanks.

Do you have the link for hwfly chip??

 

[Maxterjam]

It is not in stock by the same seller but it is this model. htt ps:// n9.cl/hf6yx

 

[QWERTY_YTREWQ]

QWERTY_YTREWQ said:
Is there a Twitter homebrew app to upload screenshots via the Switch?
Been googling and don't see anything about it. If you are here posting, you must have a pc or phone anyways, so just transfer to it then post to twatR. How often do you really need to post game screenshots anyways.

I'm Ashamed to admit it, but I never clicked the "send to smartphone" option lol.
Works perfect! Thank you

 

[WizardWell]

What's the best route for buying something from the eShop once you hack your Switch? I'm using the DNS that blocks Nintendo servers. Not a banned console yet. I want to buy an indie game proper.

 

[Dust2dust]

What's the best route for buying something from the eShop once you hack your Switch? I'm using the DNS that blocks Nintendo servers. Not a banned console yet. I want to buy an indie game proper.

Assuming you made an emuNAND for CFW, and you kept your sysNAND clean, just boot into sysNAND and buy your game.

 

[killam42]

Hello I just restored my emummc and All games show cloud icon above them after, and I copy and pasted the emummc folder from my computer that I backed up, and now my switch deletes them when I boot emu up.

 

[Hayato213]

Hello I just restored my emummc and All games show cloud icon above them after, and I copy and pasted the emummc folder from my computer that I backed up, and now my switch deletes them when I boot emu up.

I believe the data on the SD card has to match with what the NAND has when it was backup, if you restore a NAND with no game installed and game data from another time then it won't work correctly.

 

[killam42]

I believe the data on the SD card has to match with what the NAND has when it was backup, if you restore a NAND with no game installed and game data from another time then it won't work correctly.

Oh, that explains a lot because I restored it with nothing in the Nintendo folder to save time since it was 500gb, thanks at least I know the problem now.

 

[Aki3341]

I have all other parts,but I just cannot find the IRFHS8342PbF.can anyone tell me a replacement for it,the cable is also out of bounds ,too expensive cuz of shipping costs.

 

[Hayato213]

I have all other parts,but I just cannot find the IRFHS8342PbF.can anyone tell me a replacement for it,the cable is also out of bounds ,too expensive cuz of shipping costs.

Asks in the picofly thread, this is general support not focus on picofly.

 

[elMagnate]

Hi guys, I'm a noob with MacOS and I think when i "replaced" the Atmosphere and Bootloader folders, I deleted all previous content inside of it.

I just wanted to update my Atmosphere and Hekate to the latest versions in order to have the 17.0.0 Firmware on Switch.

How bad is the fuck up? Did i just lost all my savefiles and such?

How can I boot again into the emunand cfw? The only way to load a cfw, I don't even know if its emunand or not (hopefully it isnt, because it appeared connected to the internet for a second). is to inject Fusee.bin payload in Hekate. No game loads of course, although I saw Mario Wonder installed, a game that wasn't loading in my previous cfw. So i do think is realnand CFW...

Loading as usual in Hekate gives me the error no main boot entries found.

I downloaded the sygpatches again,and placed them on the corresponding folders. Since it's been a while since i hacked the switch, i forgot the process and if possible i'd like to not start from the very beginning.

I have a fake RCMloader, btw, in case that's an issue.

 

[Hayato213]

Hi guys, I'm a noob with MacOS and I think when i "replaced" the Atmosphere and Bootloader folders, I deleted all previous content inside of it.

I just wanted to update my Atmosphere and Hekate to the latest versions in order to have the 17.0.0 Firmware on Switch.

How bad is the fuck up? Did i just lost all my savefiles and such?

How can I boot again into the emunand cfw? The only way to load a cfw, I don't even know if its emunand or not (hopefully it isnt, because it appeared connected to the internet for a second). is to inject Fusee.bin payload in Hekate. No game loads of course, although I saw Mario Wonder installed, a game that wasn't loading in my previous cfw. So i do think is realnand CFW...

Loading as usual in Hekate gives me the error no main boot entries found.

I downloaded the sygpatches again,and placed them on the corresponding folders. Since it's been a while since i hacked the switch, i forgot the process and if possible i'd like to not start from the very beginning.

I have a fake RCMloader, btw, in case that's an issue.

Replacing Atmosphere and Bootloader folder won't delete your saves.

 

[WizardWell]

Assuming you made an emuNAND for CFW, and you kept your sysNAND clean, just boot into sysNAND and buy your game.

Yes that's exactly what I did. I set my DNS in sysNAND to block Nintendo, I assume I have to alter that back when I boot into sysNAND?

 

[Gorkensnorkel]

I came across some Amiibo .bin files and have no idea what to do with them. Is there a place for them somewhere on the SD card or a particular CFW I need to activate them?

 

[RedColoredStars]

I came across some Amiibo .bin files and have no idea what to do with them. Is there a place for them somewhere on the SD card or a particular CFW I need to activate them?

Just get rid of them.

https://rentry.org/EmulateAmiibos
https://github.com/CompSciOrBust/Amiigo