Hacking Sigpatches for Atmosphere (Hekate, fss0, fusee & package3)

[proconsule54]

For anyone saying “how much it take?” i just can say it depends, “randomly” they (N) are changing the way homebrew devs use the hos stuffs, sometimes the change took no time, sometimes change it all and we are lucky enough that have a community, the switch one that sometimes seems starving and bored, but always lead to a solution!

 

[[Truth]]

Relax, I was merely asking how long it takes on average for new sigpatches to be releases after an update. I wasn't asking with the intention of having these people hurry up or anything like that.

You could have at least read the last 5 comments or so...

 

[linuxares]

Good to know. I guess there are issues this time then. Wasn't aware this was such a big update. Goes to show that not everyone reads changelogs, I guess...

People are to busy doing "stability jokes" when mostly yes, it is stability they do.

 

[duckbill007]

I've already modded tinwoo so you can skip modding that bit, but all current installers should probably be modded to at least add an option to skip modding the header. It's not an issue on older firmwares but for 17.xx it seems to cause issues when installing nca's that have had that bit modded.

This is not needed with proper sigpatches.

Post automatically merged: Oct 18, 2023

BTW, did you tried to find where these errors are produced:

0x234A02	2	4517	InvalidNcaSignature
0x234C02	2	4518	NcaHeaderSignature1VerificationFailed
0x234E02	2	4519	NcaHeaderSignature2VerificationFailed

 

[mrdude]

This is not needed with proper sigpatches.

Well I take it you never read that page I linked or you would have seen why I mentioned it, however sigpatches will patch the check once they are released, but you are still altering the NCA file when installing an nca that has the bit set to one. This then changes the game dump so if re-dumping an installed game from a switch that had been installed with that bit being changed breaks the NCA signature and you end up with a dump that's not the same as the original. Now I guess you are not that bothered about that, but some people are and I would recommend you read the link I posted as people with far better brains than me have explained why it's not a good idea to alter that bit and there's no need to alter it all because FS patches already take care of it.
As for that table you posted, It's the first time I have seen it so please explain cleary what you are asking me as I am unlear of the question you are asking.

 

[linuxares]

Oh my!

 

[Manu10MGG56]

View attachment 399961

Oh my!

so its time to update? what does that mean im a newbie sorry!

 

[linuxares]

so its time to update? what does that mean im a newbie sorry!

Why? FW 17 brings nothing to the table.

 

[froggy55]

I just installed the new update, but after a few moments of booting (for example when I go to the settings for example) I get the error 2123-0011 (0x167b). Does anyone have the same? Here a image of the full error:

EDIT: I had some issues with the update, as the SD Card was exFAT and after I installed the new FW I pressed only FAT32, so I had to change the SD Card (256GB) to FAT32 as well - maybe that also plays a role?

did you get this fixed i have exact same error after accidently updating my cfw sys nand to 17.00 my emunand works fine and so does ofw

 

[Manu10MGG56]

Why? FW 17 brings nothing to the table.

i downgrade to 16.0.0 but its the freaking update button that im worried about, i dont want to update by accident and i bricked my ofw

 

[mrdude]

View attachment 399961

Oh my!

Still loader patches need to be added so fs is fixed now, but patches are not complete. Just wait, smarter people than me are on the case and no doubt will fix this in the next few days.

 

[froggy55]

you must read before tap, but well, first be sure you are on Atmosphère 1.6.1 prerelease, update Hekate to 6.0.7 and backup and delete sd:/atmosphere/contents folder, because some sysmodules and themes are no compatible with FW17

REINSTALL SIGPATCHES and then start your console and now you can backup your savegames.

so i did everything you said to do i am still getting the crash after boot to cfw sysnand its the same error as yannik sg there is a pic he posted on page 135 if your curious i am guessing i am going to have to wait until the new sig patches come and a more stable atmosphere

Post automatically merged: Oct 18, 2023

View attachment 399961

Oh my!

is this an app that runs on switch
to update sig patches

 

[linuxares]

so i did everything you said to do i am still getting the crash after boot to cfw sysnand its the same error as yannik sg there is a pic he posted on page 135 if your curious i am guessing i am going to have to wait until the new sig patches come and a more stable atmosphere

Post automatically merged: Oct 18, 2023

is this an app that runs on switch
to update sig patches

This isn't no. Plus it's still not done yet.

 

[CapitolLimited]

That crash is probably because of your custom theme. Just delete the themes folder and you should be able to boot again.

 

[froggy55]

so i did everything you said to do i am still getting the crash after boot to cfw sysnand its the same error as yannik sg there is a pic he posted on page 135 if your curious i am guessing i am going to have to wait until the new sig patches come and a more stable atmosphere

Post automatically merged: Oct 18, 2023

is this an app that runs on switch
to update sig patches

ok so i discovered if i put my console in aiplane mode well in cfw sysnand it finaly works which is fine since i do not need internet well using that function for me its used only for domping legit games updates dlcs and saves to put on my emummc thank you to all who replied and helped me there is also a sig pach pack here that solved my failed to apply the nosigck so all is good for now when everything is fully ready ill update on my emummc but not until then and thank you to all who are working so hard and diligently on this

Post automatically merged: Oct 18, 2023

That crash is probably because of your custom theme. Just delete the themes folder and you should be able to boot again.

so yes when i have a theme installed on my emmummc and i boot to the cfw sysnand it does crash but the number is 010000000001000 but the current number i was getting under program was 0100000000000025 which apperently is something to do with the internet connection so i put my console in aiplane mode well in cfw sysnand i had just enough time to do it before it crashed and now it does not crash

 

[mrdude]

ok so i discovered if i put my console in aiplane mode well in cfw sysnand it finaly works which is fine since i do not need internet well using that function for me its used only for domping legit games updates dlcs and saves to put on my emummc thank you to all who replied and helped me there is also a sig pach pack here that solved my failed to apply the nosigck so all is good for now when everything is fully ready ill update on my emummc but not until then and thank you to all who are working so hard and diligently on this

Post automatically merged: Oct 18, 2023

so yes when i have a theme installed on my emmummc and i boot to the cfw sysnand it does crash but the number is 010000000001000 but the current number i was getting under program was 0100000000000025 which apperently is something to do with the internet connection so i put my console in aiplane mode well in cfw sysnand i had just enough time to do it before it crashed and now it does not crash

Do you have a dodgy nfim patch installed? Maybe try removing all your patches and addons and do a clean install of Atmosphere by removing the Atmosphere folder and reinstalling from the github page, then update your patches.

 

[ShadowOne333]

I completely overlooked that impeeza added updated patches for Atmosphere's 1.6.1 and FW 16.1.0.
I have updated the OP patches to reflect these, but do bear in mind that these are still not compatible with FW 17.0.0, so avoid updating to that firmware until the current FS and Loader patches are properly handled.

 

[froggy55]

Do you have a dodgy nfim patch installed? Maybe try removing all your patches and addons and do a clean install of Atmosphere by removing the Atmosphere folder and reinstalling from the github page, then update your patches.

so i am kind of a newbie to the softwre of the switch i have modded 3ds and veriouse other stuff but i am now challeging myself with learing about the switch where would i find the nfim patch and would this solve the internet crashing my console when i boot to cfw sysnand my emunand works fine also i went to test nxdump and i now get an nca error of some sort and it says findkeyinprocessmemory: unable to locate key'headere_key_source in process memory is there any way to fix this or do i just need to be patient

 

[impeeza]

View attachment 399961

Oh my!

Happy October 18th

Post automatically merged: Oct 18, 2023

so its time to update? what does that mean im a newbie sorry!

if you are a nooby stay like you are, NO BODY needs to update to FW17, no software yet needs it. so do nothing.

 

[petspeed]

if you are a nooby stay like you are, NO BODY needs to update to FW17, no software yet needs it. so do nothing.

According to the nfo the latest update for Rocket League (v1.8.8 v5767168) requires 17.0.0
Not that it is a reason to update