I have the SX pro (black dongle) and I took the SX gear files from rentry. No idea what is wrong but it was quick to reach the first error
I have formatted the SD one more time, put the files again and this time it worked... During the first try I booted in the normal firmware to charge the dongle and it told me that there was something with the SD card, maybe something went wrong when I started in normal firmware or before... let's continue
Ok, so basically the steps would be:
1. Transfer the user from Oled to modded swtich
2. Create the emuNAND
3. Back-up save files in emuNAND (for example) using jksv
4. Edit the save files
4. Restore the edited save files then transfer save files from emuNAND to sysNAND using the mehtod of this video by Reclaimer Shawn:
5. Transfer user from stock to Oled Model again
Ignoring what Nintendo considers cheating, the steps should be alright?
For example, doing this process to edit a weapon in Zelda BotW (I suppose it isn't an online game) wouldn't be a problem, right?
Well I wish there was a text-based guide that showed you how to move the save files from emuMMC to sysMMC but from what I can find, that video seems to be the only guide so I suppose its better than nothing. I would highly recommend backing up your eMMC and BOOT0/1 before following the video as many people have run into trouble after watching a YouTube video. Other than that potential safety hazard, the steps you outlined are fine.
Don’t see anything that would stop you from booting. Please go into Hekate and tap the emuMMC tile and take a screen shot to post here. Looking to make sure you have emunand in place.
Well I wish there was a text-based guide that showed you how to move the save files from emuMMC to sysMMC but from what I can find, that video seems to be the only guide so I suppose its better than nothing. I would highly recommend backing up your eMMC and BOOT0/1 before following the video as many people have run into trouble after watching a YouTube video. Other than that potential safety hazard, the steps you outlined are fine.
I see.
I just tried it and it seems to work. I created a new user test it and then play Pokémon Brilliand Diamond and then I used Pkhex to put 1 potion and 1 pokédollar in my bag.
Now I don't know what else to do with a modded switch. I just did all this process to import the Platinum Style outfit that was available until February 21, 2022.
I see.
I just tried it and it seems to work. I created a new user test it and then play Pokémon Brilliand Diamond and then I used Pkhex to put 1 potion and 1 pokédollar in my bag.
Now I don't know what else to do with a modded switch. I just did all this process to import the Platinum Style outfit that was available until February 21, 2022.
What can't you do with a hacked console? Well, the answer is simply play online but given that the scene has been around for a few years, there's something for everyone. You can always mod your favorite games to change the experience. Or you can overclock the Switch to make games run smoother. There are also emulators you can boot up to run some of the older classics on the go. Alternatively, you can mess around with some of the homebrew games that people have either ported or developed themselves. Last but certainly not least is piracy which although we can't stop users from doing, it is an option that everyone is aware of. Even then, I bet there's one or two things I failed to mention that you can do now that your console is now modded.
I have a black screen when I boot into atmosphere. I have all the spashscreen up to the nintendo splashscreen (including this last one)... but then black screen I have to keep the power off button for like 10 seconds to shut down the switch...
I have a black screen when I boot into atmosphere. I have all the spashscreen up to the nintendo splashscreen (including this last one)... but then black screen I have to keep the power off button for like 10 seconds to shut down the switch...
What can't you do with a hacked console? Well, the answer is simply play online but given that the scene has been around for a few years, there's something for everyone. You can always mod your favorite games to change the experience. Or you can overclock the Switch to make games run smoother. There are also emulators you can boot up to run some of the older classics on the go. Alternatively, you can mess around with some of the homebrew games that people have either ported or developed themselves. Last but certainly not least is piracy which although we can't stop users from doing, it is an option that everyone is aware of. Even then, I bet there's one or two things I failed to mention that you can do now that your console is now modded.
Hekate splashscreen = ok
Atmosphere splashscreen = ok (therer are 2, one full and one with only the logo with a black background)
Switch splashscreen = ok
Then... nothing
Found a comment on a random forum from someone saying that this could happen if the sysNAND has a higher version than the emuNAND but I don't know how this can be possible as I just made an emuNAND with hekate so I guess it has used the same firmware version as the sysNAND ?
To be honest I updated the emuNAND with SX OS but that was on the SX OS emunand and I booted couple hours ago in my sysNAND it is still v 5. sometohing (5.1.0). Anyway, this should not have an impact now, the SX OS emunand is removed
By the way, I am using the latest files : Atmosphere [v1.4.1] + hbl [v2.4.3] + hbmenu [3.5.1] from atmosphere github
sigpatches Hekate+AMS-package3-sigpatches-1.4.1-cfw-15.0.1 attached to the first post from https://gbatemp.net/threads/sigpatches-for-atmosphere-hekate-fss0-fusee-package3.571543/ Am I using the sigpatches for FW15.0.1 that ONLY works for 15.0.1 and I have to use the sigpatches for my switch emuNAND firmware 5.1.0 then update to 15.0.1 then put the new sigpatches (15.0.1) ? => looks like the sigpatches works from FW 2.0.0 to 15.0.1
Hi!
I have a Switch v1 Erista with an SX Core installed, running SX OS 3.0.5 and EmuNAND enabled, system version 10.2.0.
After a long time of not using the console I wanted to go online, so I booted the OFW (or maybe even did a genuine boot, I can't remember), and when trying to go online I was prompted for a system update (I think 15.x).
I did not remember all the matters about system updates, so I accepted. After that, I'm unable to boot the OFW or do a genuine boot.
From what I'm reading around, I guess that the system update is not supported by the old version of the now-dead SX OS, or maybe it has something with blowing the fuses.
Is there any way to fix this? If it helps, I found on my PC a NAND backup that I did when I installed SX OS the first time (but I'm not sure if I did it before or after, it's been years).
p.s. I found installed Choidujournx, I don't remember if at some point I used it to update OFW/CFW.
Hi
what method would you recommend to be able to replace files, install update, firmwares or games without having to remove the SD card from the switch bring it over to the pc and bring it back, or pluging it into the computer, transfert files with a wifi connection, ftp or share
with the ntp mode of dbi is pretty simple but that would be great to do it over the air
I guess there are risk of removing the plane mode (wifi off)
Help.
i wanted to play a game in the stock nand and the console asked me to update the console in order to play tbe game,, so I did. But now when I try to go to emunand it says:
"A fatal error ocurred whe running Fusse.
Unable to identify package1!
Hekate splashscreen = ok
Atmosphere splashscreen = ok (therer are 2, one full and one with only the logo with a black background)
Switch splashscreen = ok
Then... nothing
Found a comment on a random forum from someone saying that this could happen if the sysNAND has a higher version than the emuNAND but I don't know how this can be possible as I just made an emuNAND with hekate so I guess it has used the same firmware version as the sysNAND ?
To be honest I updated the emuNAND with SX OS but that was on the SX OS emunand and I booted couple hours ago in my sysNAND it is still v 5. sometohing (5.1.0). Anyway, this should not have an impact now, the SX OS emunand is removed
By the way, I am using the latest files : Atmosphere [v1.4.1] + hbl [v2.4.3] + hbmenu [3.5.1] from atmosphere github
sigpatches Hekate+AMS-package3-sigpatches-1.4.1-cfw-15.0.1 attached to the first post from https://gbatemp.net/threads/sigpatches-for-atmosphere-hekate-fss0-fusee-package3.571543/ Am I using the sigpatches for FW15.0.1 that ONLY works for 15.0.1 and I have to use the sigpatches for my switch emuNAND firmware 5.1.0 then update to 15.0.1 then put the new sigpatches (15.0.1) ? => looks like the sigpatches works from FW 2.0.0 to 15.0.1
Temporarily move your /atmosphere/contents to /atmosphere/contents.bk and reboot to try again. This will make sure there are no themes or sysmodules in play. PLMk if this fixes things.
Help.
i wanted to play a game in the stock nand and the console asked me to update the console in order to play tbe game,, so I did. But now when I try to go to emunand it says:
"A fatal error ocurred whe running Fusse.
Unable to identify package1!
Hi
what method would you recommend to be able to replace files, install update, firmwares or games without having to remove the SD card from the switch bring it over to the pc and bring it back, or pluging it into the computer, transfert files with a wifi connection, ftp or share
with the ntp mode of dbi is pretty simple but that would be great to do it over the air
I guess there are risk of removing the plane mode (wifi off)
Yes there is risk but you can lessen it greatly by masking your Prodinfo (serial number) using exosphere.ini and blocking access to Ninty servers by configuring dns:mitm. Both come with Atmosphere. Here is a link on how to set it up.
Hi!
I have a Switch v1 Erista with an SX Core installed, running SX OS 3.0.5 and EmuNAND enabled, system version 10.2.0.
After a long time of not using the console I wanted to go online, so I booted the OFW (or maybe even did a genuine boot, I can't remember), and when trying to go online I was prompted for a system update (I think 15.x).
I did not remember all the matters about system updates, so I accepted. After that, I'm unable to boot the OFW or do a genuine boot.
From what I'm reading around, I guess that the system update is not supported by the old version of the now-dead SX OS, or maybe it has something with blowing the fuses.
Is there any way to fix this? If it helps, I found on my PC a NAND backup that I did when I installed SX OS the first time (but I'm not sure if I did it before or after, it's been years).
p.s. I found installed Choidujournx, I don't remember if at some point I used it to update OFW/CFW.
Last working firmware for SXOS was 11.0.0. You will need to switch to Atmosphere to do this. Unfortunately if you just upgraded you will be on 16.0.0 which just came out. We are all waiting for the new compatible Atmosphere build to be released. It might take a few days so kick back and enjoy the ride. Here is some light reading on how to switch to Atmosphere while you wait.
Temporarily move your /atmosphere/contents to /atmosphere/contents.bk and reboot to try again. This will make sure there are no themes or sysmodules in play. PLMk if this fixes things.
I do not have a folder called /contents in /atmosphere. I have downloaded atmosphere again and this folder do not exist.
And I did not installed/used sysmodules nor themes.
edit : I have removed everything from the SD, removed the partition on the SD for emuNAND and doing everything all over again... Never thought Atmosphere was so difficult to setup
=> Emunand just finished... it is activated but still black screen after switch logo... I'm desperately lost
So basically :
- Atmosphere (from github) + hekate (from githuv) + sigpatches (from gbatemp)
- Switch on 5.1.0
- Hekate works perfectly, I made a partition emunand + nand backup
- Do not work to start the switch (black screen after nsw bootlogo)
- did the same with emunand on files
- This seems a bit slower when booting (the bootlogo stays longer like 1 sec more)
- It works... Wait WHAT ?????
How on earth can I be the only one having this issue and not being able to boot with emunand on partition ???
I do not have a folder called /contents in /atmosphere. I have downloaded atmosphere again and this folder do not exist.
And I did not installed/used sysmodules nor themes.
edit : I have removed everything from the SD, removed the partition on the SD for emuNAND and doing everything all over again... Never thought Atmosphere was so difficult to setup
=> Emunand just finished... it is activated but still black screen after switch logo... I'm desperately lost
So basically :
- Atmosphere (from github) + hekate (from githuv) + sigpatches (from gbatemp)
- Switch on 5.1.0
- Hekate works perfectly, I made a partition emunand + nand backup
- Do not work to start the switch (black screen after nsw bootlogo)
- did the same with emunand on files
- This seems a bit slower when booting (the bootlogo stays longer like 1 sec more)
- It works... Wait WHAT ?????
How on earth can I be the only one having this issue and not being able to boot with emunand on partition ???
Actually you’re not the only one this has happened to. There’s one other person w/ the exact same issue where they had to use files based emunand. Nothing we did would resolve it until we used files based on a whim.
What size SDCard are you using? 512G or higher perhaps?
Hello,
I hope I'm in the right place to ask this questions, and I do that after using the search bar and google too ^^
I was playing on my Switch patched/unbanned running SYSCFW (Atmosphere F550 SYS) fine until yesterday when I was ingame,
The screen showed this error from HEKATE : see attached file.
I was using :
the last Hekate release(hekate_ctcaer_6.0.1_Nyx_1.5.1.zip),
last bootloader (atmosphere-1.4.1-master-7a69f2f06+hbl-2.4.3+hbmenu-3.5.1.zip)
I tried to restore my backup, then restart a clean install.
It's still not working, is there a way to check the files or compatibility because my console may did an update ?
Then the issue is from Hekate or Atmosphere not working after an update ?
Can you help me please proceed to UPDATE the CFW (if that may solve ?) ?
Or should I dump my firmware ?
Sorry for all these questions, feel free to redirect me to your previous answer if you don't want to waste time
on another silly question from me
Hello,
I hope I'm in the right place to ask this questions, and I do that after using the search bar and google too ^^
I was playing on my Switch patched/unbanned running SYSCFW (Atmosphere F550 SYS) fine until yesterday when I was ingame,
The screen showed this error from HEKATE : see attached file.
I was using :
the last Hekate release(hekate_ctcaer_6.0.1_Nyx_1.5.1.zip),
last bootloader (atmosphere-1.4.1-master-7a69f2f06+hbl-2.4.3+hbmenu-3.5.1.zip)
I tried to restore my backup, then restart a clean install.
It's still not working, is there a way to check the files or compatibility because my console may did an update ?
Then the issue is from Atmosphere not working after an update ?
Can you help me please proceed to UPDATE the CFW (if that may solve ?) ?
Or should I dump my firmware ?
This is the perfect place. If you’ve updated your Firmware to the latest, there was a new FW just released that will require so,e work before a corresponding CFW is released. I’m hearing this one had some big changes so it might take longer than we would normally hope for. Watch this thread and any new ones that might come out on the topic.
Don’t see anything that would stop you from booting. Please go into Hekate and tap the emuMMC tile and take a screen shot to post here. Looking to make sure you have emunand in place.
Seemingly out of nowhere a PC port for Pokemon Platinum has surfaced online, bundled alongside the source code for those interested in building and developing it for...
With very little in the way of announcement, Valve has today increased the price of the Steam Deck but some fairly considerable margins. Both of the available models...
Nintendo's expected Summer showcase is here, offering up plenty of new announcements and exciting reveals. Let's see what they have in store in the latest Nintendo...
Continuing with the great news of Pokémon Platinum getting a native unofficial PC port just a few days ago, today, yet another classic title from the franchise has...
The latest in a growing number of native PC ports, Paper Mario ReCut got its first pre-release build earlier this week. Based on the N64 recompilation toolchain, the...
When you talk about 3DS emulation, most people would jump to Citra. As the defacto choice since its first release it's seen tremendous success, and even after its...
What once seemed like a far off dream, and after many, many community restarts throughout the years, the elusive Mother 1 / EarthBound Beginnings Remake, which is a...
A whole hour of PlayStation content is on the way, thanks to the latest State of Play showcase. Headlining the stream will be Marvel's Wolverine, alongside a...
Since being decompiled Super Mario 64 has seen a considerable amount of interest. We've had multiple PC ports, but the efforts beyond that are really astounding. It's...
For the first time in 13 years, the Call of Duty series will again return to Nintendo's consoles. Set to launch on the 23rd of October, the latest release, Modern...
After much speculation, a lot of which being caused by dbrand's unceremonious reveal of their Companion Cube casing, the Steam Machine is finally available to order...
With very little in the way of announcement, Valve has today increased the price of the Steam Deck but some fairly considerable margins. Both of the available models...
Nintendo's expected Summer showcase is here, offering up plenty of new announcements and exciting reveals. Let's see what they have in store in the latest Nintendo...
Seemingly out of nowhere a PC port for Pokemon Platinum has surfaced online, bundled alongside the source code for those interested in building and developing it for...
With rumours circulating about a Nintendo Direct in the coming days and weeks, fans are left speculating and hoping as to what might be included. At the centre of all...
The latest in a growing number of native PC ports, Paper Mario ReCut got its first pre-release build earlier this week. Based on the N64 recompilation toolchain, the...
A whole hour of PlayStation content is on the way, thanks to the latest State of Play showcase. Headlining the stream will be Marvel's Wolverine, alongside a...
After much speculation and rumour, the fabled Nintendo Direct is upon us. Set to go live tomorrow, the 9th of June, at 3pm in the UK, it'll feature 50 minutes of...
For the first time in 13 years, the Call of Duty series will again return to Nintendo's consoles. Set to launch on the 23rd of October, the latest release, Modern...
Following an investigation over misleading commercial practices, today Nintendo has been imposed a fine of 35 million euros related to the controller malfunctions...
