Hacking SWITCH NOOB PARADISE - Ask questions here

[binkinator]

you are looking for NxFileViewer have a tool for renaming files on a folder.

Oh shoot. I did NOT know NXFileViewer had a renamer! I’m trying it out right now.

@veggav NXFileViewer might be an easier path to get what you want. nspIndexer takes a bit of setup to get running and does a bunch of stuff you might not care about.

Post automatically merged: Dec 4, 2022

Heh i just update and swap all atmo and hekate files on sd xD just to find out that tesla will not work in dock when screen size is scaled down from 100% but now i know :X

Wait, what? How did you figure out it was a scaling issue?

 

[Lamcza]

Oh shoot. I did NOT know NXFileViewer had a renamer! I’m trying it out right now.

@veggav NXFileViewer might be an easier path to get what you want. nspIndexer takes a bit of setup to get running and does a bunch of stuff you might not care about.

Post automatically merged: Dec 4, 2022

Wait, what? How did you figure out it was a scaling issue?

for once i google tesla not system monitor xD

but now i have some issues with booting i can boot to hekate from tegrarcm and it straight away booting to atmo by fusee but when i do restart from there to enter hekate and boot later in fusee iam ending in lower brightness black screen same if i perfomre just restart

 

[binkinator]

for once i google tesla not system monitor xD

but now i have some issues with booting i can boot to hekate from tegrarcm and it straight away booting to atmo by fusee but when i do restart from there to enter hekate and boot later in fusee iam ending in lower brightness black screen same if i perfomre just restart

Are you changing screen brightness in /bootloader/hekate_ipl.ini?

Are you using Fizeau to change your screen colors?

Post automatically merged: Dec 4, 2022

@impeeza I just figured it out! LOL



Nice hat, man!

 

[Lamcza]

Are you changing screen brightness in /bootloader/hekate_ipl.ini?

Are you using Fizeau to change your screen colors?

Hmm it looks like when i swap hekate.ipl.ini to that one form rentry everything is bootking fine : o
edit: oh snap it boot 2 times and on the 3 try it stucks on blackscreen again


that was my ini before and i have no idea why it was bad xD i dont rlly change anything in it

[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
noticker=0
autohosoff=1
autonogc=1
updater2p=0
bootprotect=0

[CFW (sysMMC)]
emummc_force_disable=1
fss0=atmosphere/package3
icon=bootloader/res/icon_payload.bmp

[CFW (emuMMC)]
emummcforce=1
fss0=atmosphere/package3
icon=bootloader/res/icon_payload.bmp

[Stock]
emummc_force_disable=1
fss0=atmosphere/package3
icon=bootloader/res/icon_switch.bmp
stock=1

[Fusee]
icon=bootloader/res/icon_payload.bmp
payload=bootloader/payloads/fusee.bin

 

[binkinator]

Hmm it looks like when i swap hekate.ipl.ini to that one form rentry everything is bootking fine : o
edit: oh snap it boot 2 times and on the 3 try it stucks on blackscreen again


that was my ini before and i have no idea why it was bad xD i dont rlly change anything in it

[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
noticker=0
autohosoff=1
autonogc=1
updater2p=0
bootprotect=0

[CFW (sysMMC)]
emummc_force_disable=1
fss0=atmosphere/package3
icon=bootloader/res/icon_payload.bmp

[CFW (emuMMC)]
emummcforce=1
fss0=atmosphere/package3
icon=bootloader/res/icon_payload.bmp

[Stock]
emummc_force_disable=1
fss0=atmosphere/package3
icon=bootloader/res/icon_switch.bmp
stock=1

[Fusee]
icon=bootloader/res/icon_payload.bmp
payload=bootloader/payloads/fusee.bin

Unless you are changing the “backlight=“ line or running a sys module like Fizeau, there are not many things software wise that are going to impact your Switch randomly like this. Maybe a loose cable?

 

[Reoseb]

Redirection mode is also called title override. Title override means to hold down the (R)ight shoulder button while clicking a game title…keep holding it down until you see hbmenu. Once inside hbmenu the red “Applet” warning will be gone and you can continue your work.

I figured that already, thanks for explaining better.
But my main problem is how to use cheats with aio switch updater. Even via redirection, i see no option to activate the cheats in the menu list. Do you know how to or maybe a link for a guide or tuto plz ?

 

[binkinator]

I figured that already, thanks for explaining better.
But my main problem is how to use cheats with aio switch updater. Even via redirection, i see no option to activate the cheats in the menu list. Do you know how to or maybe a link for a guide or tuto plz ?

To manage cheats try Breeze from @TomSwitch.

There’s a discord link on his GitHub.

You can have a look at this to learn the basic how to create cheat with Breeze

Great link!

Here are some more:

• learn the basics of Breeze here.
• join Tom’s group: https://gbatemp.net/group/22/info

 

[Prior22]

Use Hekate to format and partition your card. You need a 29G (1x Full) partition for your emunand.

• Inject Hekate
• Select the Tools tab, then select Partition SD Card, and finally press Ok.
• To create a partition-basedEmunand:
• Move the emuMMC (RAW) slider until it says 29 full
• press Next Step
• finally press Start.
• Once the operation is done, press Close and then select the Home tab.

I created the partition on the new card

Use Hekate to format and partition your card. You need a 29G (1x Full) partition for your emunand.

• Inject Hekate
• Select the Tools tab, then select Partition SD Card, and finally press Ok.
• To create a partition-basedEmunand:
• Move the emuMMC (RAW) slider until it says 29 full
• press Next Step
• finally press Start.
• Once the operation is done, press Close and then select the Home tab.

i created the partition for the new card and transferred all the data from the old card to the new card. But I continue to receive the same gpt error.

 

[binkinator]

I created the partition on the new card

i created the partition for the new card and transferred all the data from the old card to the new card. But I continue to receive the same gpt error.

Have you tried “fix hybrid gpt” button in Hekate? It’s in the Partitioning page at the top right.

 

[SylverReZ]

Nice hat, man!

I also have a hat, see.

 

[binkinator]

I also have a hat, see.

View attachment 341502

Cool hat! Nice logo!

 

[SylverReZ]

Cool hat! Nice logo!

Thank you so much. That logo is the one that I used from my Switch bootlogo.

 

[testing123]

May I please ask how to update Animal Crossing when using Atmosphere? I have the actual NSP but not sure what to do with it.

 

[SylverReZ]

May I please ask how to update Animal Crossing when using Atmosphere? I have the actual NSP but not sure what to do with it.

You'll be fine updating online, but its only when you play online that you can't.

 

[testing123]

You'll be fine updating online, but its only when you play online that you can't.

Sounds risky. I'd rather just manually update it with the files here. Ever done that?

 

[SylverReZ]

Sounds risky. I'd rather just manually update it with the files here. Ever done that?

I know it does sounds risky and all. Updating manually with NSP files works fine also.

 

[testing123]

I know it does sounds risky and all. Updating manually with NSP files works fine also.

How do you install NSP updates?

 

[SylverReZ]

How do you install NSP updates?

Use Tinwoo or Awoo-Installer.

 

[Lamcza]

Unless you are changing the “backlight=“ line or running a sys module like Fizeau, there are not many things software wise that are going to impact your Switch randomly like this. Maybe a loose cable?

some ppl have similar issues maybe i will migrate to another sd card for a start : o

 

[nickieemp]

Hello guys,

I have bought a new Eriko device and I wish to transfer the saves from my first Eriko, to my second Eriko.
I have tried JKSV, but when it restores the save files, it says done, but it is not actually restored. The new device has the new set of users and I wonder if that can be a problem...