This:http://www.thinkgeek.com/gadgets/cellphone/e66e/ or this:http://www.boxwave.com/products/keyboardbuddycase/apple-iphone-4-keyboard-buddy-case_3968.htm or if they don't work suggest me one.
The cases won't fit because the iPod touch 4G has different dimensions from the iPhone 4. I have no suggestions for you though.
The iPod would pair with the keyboard it just won't fit in the case. As I understand the width and length should be about the same though so a bit of padding might make the case usable.
Some thin foam should do it. The iPhone4 is a bit taller than an iPT (4.4in instead of 4.5in) and is 9.3mm thick instead of 7.2mm.
The power button may cause issue and the headphone jack definitely will (its on the top of the iPhone but the bottom of the iPod). A bit of drilling through plastic would work though (in theory)
The power button may cause issue and the headphone jack definitely will (its on the top of the iPhone but the bottom of the iPod). A bit of drilling through plastic would work though (in theory)
- Joined
- Apr 2, 2010
- Messages
- 165
- Trophies
- 0
- Age
- 29
- Location
- The United States of retard
- Website
- Visit site
- XP
- 115
- Country
It would work for either but fitting them in to the case is the problem with the 3GS it might not fit (being too big) and with the iPod Touch 4 there would be so much wiggle room that it would scratch the cheap chrome on the back side of it. And it would do away with the use of both cameras unless you figured some way to get padding to fit to where it would leave a space for that.Sop said:
Similar threads
