the wafel_install.ipx was what I told you and it should have worked. The setup does some other stuff in addition, like triggering the initial setup. But if that is working now, then it is fine.
I have now completed steps 7-10 of the MLC rebuild. However, this wafel file was not deleted on my system. Therefore, I manually deleted it from the SD card. Then I performed the patch SD and boot SLC again, and it booted into the Wii U logo, but is now stuck there again. I am now dumping the SLC again.
Post automatically merged:
The Wii U logo is displayed, but the blue LED is flashing. Is this normal? I'm not going to turn off the Wii U for now. Or am I back to a BLOD?
Post automatically merged:
Waited until the LED stopped flashing, but no difference. Still only boots up to the Wii U logo.This time, it took significantly longer to dump the SLC file.Here is the check of the SLC.RAW file:
Code:
** nandBinCheck : Wii nand info tool **
from giantpune
built: Mar 24 2017 23:49:06
NAND Type: SLC (WiiU)
checking boot1...
Boot1 hash: "ba411f8f807a0f6c7e574d840dbc85eaa42399ad"
Boot1 OK!
checking for lost clusters...
total used clusters 2ea8 of 0x8000
found 0 lost clusters
UNK ( 0xffff ) 4d (1196, 1197, 1fd8, 1fd9, 1fda, 1fdb, 1fdc, 1fdd, 1fde, 1fdf, 20d8, 20d9, 20da, 20db, 20dc, 20dd, 20de, 20df, 2120, 2121, 2122, 2123, 2124, 2125, 2126, 2127, 2290, 2291, 2292, 2293, 2294, 2295, 2296, 2297, 2450, 2451, 2452, 2453, 2454, 2455, 2456, 2457, 2458, 2459, 245a, 245b, 245c, 245d, 245e, 245f, 2480, 2481, 2482, 2483, 2484, 2485, 2486, 2487, 25a8, 25a9, 25aa, 25ab, 25ac, 25ad, 25ae, 25af, 2640, 2641, 2642, 2643, 2644, 2645, 2646, 2647, 716d, 716e, 716f)
free 49fc
verifying ecc...
0 out of 879872 pages had incorrect ecc.
they were spread through 0 clusters in 0 blocks:
()
0 of those clusters are non-special (they belong to the fs)
verifying hmac...
verifying hmac for 256 files
hmac bad (1)
"scfm.img" is 8004000 bytes ( 2001 ) clusters
00000000 ff000000 00000000 00000000 00000000 ................
00000010 00000000 00000000 00000000 00000000 ................
00000020 00000000 00000000 00000000 00000000 ................
00000030 00000000 00000000 00000000 00000000 ................
00000000 ff000000 00000000 00000000 00000000 ................
00000010 00000000 00000000 00000000 00000000 ................
00000020 00000000 00000000 00000000 00000000 ................
00000030 00000000 00000000 4f0b4f0b 9b0d6402 ........O.O...d.
00000000 18513f9e 22be3c53 b87edda5 c2f8c67f .Q?.".<S.~......
00000010 d1ca3df9 ..=.
bad HMAC for "/scfm.img"
1 files had bad HMAC data
checking HMAC for superclusters...
0 superClusters had bad HMAC data
I have completely removed the SD card. The log says the following:
OpenDir;/vol/sdcard/wafel_install;-00000000
OpenMCP;/vol/sdcard/wafel_install;-00000000
InstallInfo;tmp_000500101000400A;-00000000
Install;tmp_000500101000400A;-00000000
Flush;MLC;-00000000
Flush;SLC;-00000000
Post automatically merged:
Or do I have to remove this isfshax and minute as well?
That is from the install plugin, not from the setup plugin. Can you run the setup plugin again, with empty wafel_install folder? That should trigger the initial setup which might help with the hang on the Wii u Logo
The wafel_install folder is empty. I deleted all the files in it. I don't get any other log. The wafel setup mlc.ipx, which according to the mlc repair should delete itself, did not do so. Is this because I still have both the wafel setup mlc.ipx and the wafel_install.ipx in the Wii U folder? In iOS Plugins.
For some reason, the files were still there. I removed them and deleted the wafel_install file. Now I get the setup log.
OpenDir /vol/sdcard/wafel_install: 0
OpenMCP /vol/sdcard/wafel_install: 0
Flush MLC: 0
Region already matches (P:4, G:4, C:4).
SetInitialLaunch 0: 1
Flush SLC: 0
Delete plugin: 0
The other file deleted itself and the Wii U has booted up. I'll just go and get a gamepad. Is there any way I can remove Minute and ISFSHax? I'd like to have a normal Wii U. In any case, thank you very very much for your help.
I set up the console. Then the minute menu appeared briefly, followed by a prompt to create a Mii. Now I'm in the main menu. I'd say everything is OK.
Post automatically merged:
Hey,
The Wii U is working again without any problems. However, it seems to try to boot into minute.menu every time it boots up. At least that's what the LEDs indicate. How can I remove this and isfshax so that it's basically an "original" Wii U again? Are there instructions for this? Will the Wii U work like it did before, or does it still need "plugins" like isfshax? Sorry to bother you again, and thanks again for your help.
Sony made a shocking announcement today, revealing that the company plans to move away from physical game releases in the future. Citing claims of how the industry is...
Last month we got confirmation of a new model of Switch 2 to better comply with upcoming EU regulations. With the legislation set to come into effect in February of...
The end has come for the PlayStation 3 and the PlayStation Vita. After supporting the PSN Store on the PS3 and PS Vita since 2006 and 2011 respectively, Sony has...
Tired of waiting for Game Freak to bring Pokemon Emerald to modern platforms? We've got you covered with a brand new port in the works. Currently available on GitHub...
Ocarina of Time is back in style as the upcoming Switch 2 remake looms on the horizon. But what's a fan of the game to do over the next few months? If you've been...
For fans of Sinnoh, the pickings are slim. If you want the best experience you're left deciding between the updated region in Platinum, or the somewhat controversial...
The Switch 2 has been out for a year now, but you shouldn't count the original system out yet! Released a few days ago, popular PS2 emulator NetherSX2 has found its...
Hot on the heels of their NetherSX2 port, @Nagaa is back with another hugely anticipated release: a Switch port of the popular Wii U emulator Cemu. We've got more...
The Pokemon series is known for its vast assortment of spin off titles, with the majority being well-received. We've had an assortment of Mystery Dungeon titles, a...
Right on the heels of a NetherSX2 port, the Switch once again proves it's still got some life left in it as 3DS emulation graces the system. Promising mostly...
Sony made a shocking announcement today, revealing that the company plans to move away from physical game releases in the future. Citing claims of how the industry is...
Last month we got confirmation of a new model of Switch 2 to better comply with upcoming EU regulations. With the legislation set to come into effect in February of...
The end has come for the PlayStation 3 and the PlayStation Vita. After supporting the PSN Store on the PS3 and PS Vita since 2006 and 2011 respectively, Sony has...
Ocarina of Time is back in style as the upcoming Switch 2 remake looms on the horizon. But what's a fan of the game to do over the next few months? If you've been...
Tired of waiting for Game Freak to bring Pokemon Emerald to modern platforms? We've got you covered with a brand new port in the works. Currently available on GitHub...
Amidst news of layoffs and cancellations in the wake of Xbox's larger changes, Bethesda has today come out with a statement discussing their active projects. In this...
For fans of Sinnoh, the pickings are slim. If you want the best experience you're left deciding between the updated region in Platinum, or the somewhat controversial...
Announced today during the Octopath Traveler 8th Anniversary live stream, it's been confirmed that both the first game and its sequel will be launching on the Switch...
In this time of everything costing more a year after it's released, it's nice to see some things sticking to the old ways. Capcom have today announced that the latest...
Saber Interactive, in collaboration with Universal Products & Experiences, revealed a new gameplay trailer for Turok: Origins. This new entry to the dino-hunting...