ROM Hack USB/SYS-botbase causing error shortly after booting

DaMegaTaco

DaMegaTaco

Well-Known Member
OP
Member
Level 2
Joined
Jan 9, 2021
Messages
110
Trophies
0
Age
32
Location
LilSeaDog
Website
nookazon.com
XP
194
Country
United States
So I want to use mobileinjector for ACNH, but every time I add the folder for either USB/SYS-botbase the CFW gives an unhandled exception error or whatever and asks me to reboot from payload or power off. I do remember that I did change some files so that I could install ACNH to the SD card as the standard version I use wasn't working with Awoo giving me a firmware issue complaint and I suspect that is what is causing my problem, but even if I use my clean atmosphere folder backup I still get the same issue. I think I am also using a different payload on my loader, which could be how I fixed the awoo problem as my hekete doesn't look like the one I started with, but I really don't remember what I originally did. Does anyone have any idea why I am getting this error message within 5 seconds of booting from hekete into the emucc no matter what I do?
 
K

kidkat210

Well-Known Member
Member
Level 11
Joined
Nov 9, 2016
Messages
1,064
Trophies
0
Age
29
XP
2,337
Country
United States
We need a lil more info. Whats your setup, what firmware, what cfw and version your on. The program id when you get the error
 
DaMegaTaco

DaMegaTaco

Well-Known Member
OP
Member
Level 2
Joined
Jan 9, 2021
Messages
110
Trophies
0
Age
32
Location
LilSeaDog
Website
nookazon.com
XP
194
Country
United States
hbmenu v3.4
nx-bootloader v2.4
Firmware 11.0.1
atmosphere 1.62.2-master-1085ccbe
hekate v5.5.2

standard unpatched switch with a jig and loader

error code 2001-0123 (0xf601)
program 430000000000000B

installed the sysbot-base.nsp without issue and can run the switch with the sysbot-base content fine, but can not test it as I can't connect to the hotspot without connecting to the internet to test the mobile injector for ACNH. I want to use USBbot-base, but it keeps giving the error above.
 
Last edited by DaMegaTaco,
DaMegaTaco

DaMegaTaco

Well-Known Member
OP
Member
Level 2
Joined
Jan 9, 2021
Messages
110
Trophies
0
Age
32
Location
LilSeaDog
Website
nookazon.com
XP
194
Country
United States
I actually think I got it working... I used the .nsp to replace the one in the content folder and now it works, but I don't know how to get the drivers to install on my computer so the switch can connect

--------------------- MERGED ---------------------------

didn't work even after installing the driver.. not sure at all what it is.
 
burhansalih

burhansalih

Well-Known Member
Member
Level 11
Joined
Jan 11, 2009
Messages
1,598
Trophies
1
Location
London, England
XP
2,485
Country
United Kingdom
Delete the whole folder and recreate as below.



Copy the sys-botbase.nsp file to sdmc://atmosphere/contents/430000000000000B and rename it to exefs.nsp. Create a new folder in sdmc://atmosphere/contents/430000000000000B named "flags". Create a empty file called boot2.flag inside this folder. Restart your switch.
 
DaMegaTaco

DaMegaTaco

Well-Known Member
OP
Member
Level 2
Joined
Jan 9, 2021
Messages
110
Trophies
0
Age
32
Location
LilSeaDog
Website
nookazon.com
XP
194
Country
United States
i was able to get sysbot to work, but not usbbot. I can't really use sysbot though as I don't know how to prevent the switch from connecting to the internet while hosting a hotspot while the internet is active and it won't let me connect to the hotspot if the internet is not. I have tried using the stock bootloader and atmosphere folder that was my backup when I first created my SD, but even that didn't fix usvbot
 
T

Tumbleweed538

New Member
Newbie
Level 1
Joined
Dec 31, 2020
Messages
1
Trophies
0
Age
39
XP
45
Country
United States
I am experiencing what appears to be the same issue. I have had sys-botbase running fine for some time. I am working on it now if I find a fix I will let you know. I have a similar setup but I'm using a dongle to boot instead of a jig/injector. Same software etc. It seems to crash within 30 seconds of the switch getting to the main menu screen.

I'm running this on emunand.

I completely removed sys-botbase before installing usb-bot base because I know they cannot coexist. I feel like there is a piece I missed removing sys-botbase but cannot find it. I removed the 43000xxx folder and of course replaced it in the same structure. The author of usbbot-base recommends removing a file that I don't seem to have. More research but figured I'd toss this out here if others have seen this.

Thx!

The log is anyone is interested:
Atmosphère Fatal Report (v1.1):
Result: 0xF601 (2001-0123)

Program ID: 430000000000000b
Process Name: sys-botbase
Firmware: 11.0.1 (Atmosphère 0.16.2-master-1085ccbe)
General Purpose Registers:
Start Address: 0000000000000000
Stack Trace:
ReturnAddress[00]: 0000000000000000
ReturnAddress[01]: 0000000000000000
ReturnAddress[02]: 0000000000000000
ReturnAddress[03]: 0000000000000000
ReturnAddress[04]: 0000000000000000
ReturnAddress[05]: 0000000000000000
ReturnAddress[06]: 0000000000000000
ReturnAddress[07]: 0000000000000000
ReturnAddress[08]: 0000000000000000
ReturnAddress[09]: 0000000000000000
ReturnAddress[10]: 0000000000000000
ReturnAddress[11]: 0000000000000000
ReturnAddress[12]: 0000000000000000
ReturnAddress[13]: 0000000000000000
ReturnAddress[14]: 0000000000000000
ReturnAddress[15]: 0000000000000000
ReturnAddress[16]: 0000000000000000
ReturnAddress[17]: 0000000000000000
ReturnAddress[18]: 0000000000000000
ReturnAddress[19]: 0000000000000000
ReturnAddress[20]: 0000000000000000
ReturnAddress[21]: 0000000000000000
ReturnAddress[22]: 0000000000000000
ReturnAddress[23]: 0000000000000000
ReturnAddress[24]: 0000000000000000
ReturnAddress[25]: 0000000000000000
ReturnAddress[26]: 0000000000000000
ReturnAddress[27]: 0000000000000000
ReturnAddress[28]: 0000000000000000
ReturnAddress[29]: 0000000000000000
ReturnAddress[30]: 0000000000000000
ReturnAddress[31]: 0000000000000000
 
S

Sida

New Member
Newbie
Level 1
Joined
Jan 31, 2021
Messages
1
Trophies
0
Age
34
XP
40
Country
United Kingdom
Tumbleweed538 said:
I am experiencing what appears to be the same issue. I have had sys-botbase running fine for some time. I am working on it now if I find a fix I will let you know. I have a similar setup but I'm using a dongle to boot instead of a jig/injector. Same software etc. It seems to crash within 30 seconds of the switch getting to the main menu screen.

I'm running this on emunand.

I completely removed sys-botbase before installing usb-bot base because I know they cannot coexist. I feel like there is a piece I missed removing sys-botbase but cannot find it. I removed the 43000xxx folder and of course replaced it in the same structure. The author of usbbot-base recommends removing a file that I don't seem to have. More research but figured I'd toss this out here if others have seen this.

Thx!

The log is anyone is interested:
Atmosphère Fatal Report (v1.1):
Result: 0xF601 (2001-0123)

Program ID: 430000000000000b
Process Name: sys-botbase
Firmware: 11.0.1 (Atmosphère 0.16.2-master-1085ccbe)
General Purpose Registers:
Start Address: 0000000000000000
Stack Trace:
ReturnAddress[00]: 0000000000000000
ReturnAddress[01]: 0000000000000000
ReturnAddress[02]: 0000000000000000
ReturnAddress[03]: 0000000000000000
ReturnAddress[04]: 0000000000000000
ReturnAddress[05]: 0000000000000000
ReturnAddress[06]: 0000000000000000
ReturnAddress[07]: 0000000000000000
ReturnAddress[08]: 0000000000000000
ReturnAddress[09]: 0000000000000000
ReturnAddress[10]: 0000000000000000
ReturnAddress[11]: 0000000000000000
ReturnAddress[12]: 0000000000000000
ReturnAddress[13]: 0000000000000000
ReturnAddress[14]: 0000000000000000
ReturnAddress[15]: 0000000000000000
ReturnAddress[16]: 0000000000000000
ReturnAddress[17]: 0000000000000000
ReturnAddress[18]: 0000000000000000
ReturnAddress[19]: 0000000000000000
ReturnAddress[20]: 0000000000000000
ReturnAddress[21]: 0000000000000000
ReturnAddress[22]: 0000000000000000
ReturnAddress[23]: 0000000000000000
ReturnAddress[24]: 0000000000000000
ReturnAddress[25]: 0000000000000000
ReturnAddress[26]: 0000000000000000
ReturnAddress[27]: 0000000000000000
ReturnAddress[28]: 0000000000000000
ReturnAddress[29]: 0000000000000000
ReturnAddress[30]: 0000000000000000
ReturnAddress[31]: 0000000000000000
Click to expand...


What file did he ask you to remove? I have this same issue and can't find any solution anywhere, I'd like to see if I have that file.
 
DaMegaTaco

DaMegaTaco

Well-Known Member
OP
Member
Level 2
Joined
Jan 9, 2021
Messages
110
Trophies
0
Age
32
Location
LilSeaDog
Website
nookazon.com
XP
194
Country
United States
I need to figure out how to get this working, but I'm still getting this issue whenever I add the files to my SD... What is causing this? How do I fix it? Or how do I use sys-botbase without allowing my console to connect online? As whenever I try to connect to a hotspot that doesn't have internet connection it refuses to connect.
 

Attachments

  • 16127435777964435702160076476419.jpg
    16127435777964435702160076476419.jpg
    1.1 MB · Views: 224
DaMegaTaco

DaMegaTaco

Well-Known Member
OP
Member
Level 2
Joined
Jan 9, 2021
Messages
110
Trophies
0
Age
32
Location
LilSeaDog
Website
nookazon.com
XP
194
Country
United States
It's not crashing anymore, but it won't recognize the console is plugged in. I'm pretty sure I installed the drivers on the PC side so I'm not sure what's wrong now.

Edit: So when the switch is in RCM is shows up a libusbK on zadig, but when it is on it shows up as HidUsb where I am afraid to replace that with libusbK as I don't want it to screw up any other devices reliant on HidUsb. I'm a bit at a loss on what to do
 
Last edited by DaMegaTaco,

Site & Scene News

Go to forum More news

Popular threads in this forum

Hacking Misc  Getting the MIG Switch to load an XCI dump without its original Initial Data

DBI language error

Emulation Homebrew  duckstation for Switch

Can you trade in a banned switch for an unbanned one?

Why is Atmosphere so dominant?

Last switch firmware blocking MIG SWITCH?

Crosscode Hacking thread

Hacking  Loader.kip for AMS 1.7.0 with FW 17.0.1 - sys-clk error ??

General chit-chat
Help Users
  • K3Nv2 @ K3Nv2:
    https://youtu.be/_sJ79aDQTeQ?si=dCPYbyGhZ8OFK8nb
  • Psionic Roshambo @ Psionic Roshambo:
    https://www.youtube.com/watch?v=HlxH_Th3-LI
  • Xdqwerty @ Xdqwerty:
    good night
  • BakerMan @ BakerMan:
    as to you
  • K3Nv2 @ K3Nv2:
    How do you know if the night will be good when you're asleep
  • BakerMan @ BakerMan:
    because i didn't say i was asleep
  • BakerMan @ BakerMan:
    i said i was sleeping...
  • BakerMan @ BakerMan:
    sleeping with uremum
  • K3Nv2 @ K3Nv2:
    Even my mum slept on that uremum
  • TwoSpikedHands @ TwoSpikedHands:
    yall im torn... ive been hacking away at tales of phantasia GBA (the USA version) and have so many documents of reverse engineering i've done
  • TwoSpikedHands @ TwoSpikedHands:
    I just found out that the EU version is better in literally every way, better sound quality, better lighting, and there's even a patch someone made to make the text look nicer
  • TwoSpikedHands @ TwoSpikedHands:
    Do I restart now using what i've learned on the EU version since it's a better overall experience? or do I continue with the US version since that is what ive been using, and if someone decides to play my hack, it would most likely be that version?
  • Sicklyboy @ Sicklyboy:
    @TwoSpikedHands, I'll preface this with the fact that I know nothing about the game, but, I think it depends on what your goals are. Are you trying to make a definitive version of the game? You may want to refocus your efforts on the EU version then. Or, are you trying to make a better US version? In which case, the only way to make a better US version is to keep on plugging away at that one ;)
  • Sicklyboy @ Sicklyboy:
    I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
  • TwoSpikedHands @ TwoSpikedHands:
    @Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
  • TwoSpikedHands @ TwoSpikedHands:
    I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
  • TwoSpikedHands @ TwoSpikedHands:
    I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
  • TwoSpikedHands @ TwoSpikedHands:
    I appreciate the insight!
  • The Real Jdbye @ The Real Jdbye:
    @TwoSpikedHands just switch, all the knowledge you learned still applies and most of the code and assets should be the same anyway
  • The Real Jdbye @ The Real Jdbye:
    and realistically they wouldn't

    be able to play it legally anyway since they need a ROM and they probably don't have the means to dump it themselves
  • The Real Jdbye @ The Real Jdbye:
    why the shit does the shitbox randomly insert newlines in my messages
  • Veho @ Veho:
    It does that when I edit a post.
  • Veho @ Veho:
    It inserts a newline in a random spot.
  • The Real Jdbye @ The Real Jdbye:
    never had that i don't think
  • Karma177 @ Karma177:
    do y'all think having an sd card that has a write speed of 700kb/s is a bad idea?
    trying to restore emunand rn but it's taking ages... (also when I finished the first time hekate decided to delete all my fucking files :wacko:)
    Karma177 @ Karma177: do y'all think having an sd card that has a write speed of 700kb/s is a bad idea? trying to...