USB Loader GX Pokepark Issues & IOS Settings

Discussion in 'Wii - Backup Loaders' started by drchink, Nov 11, 2019.

Share This Page

Share This Page

  1. drchink
    OP

    drchink Member

    Newcomer
    3
    46
    Level 3
    Apr 8, 2009
    United States
    Hi,

    I haven't touched my wii for a few years, but my nephews are really into pokemon, so I thought I'd see what games I had on my HDD. I have pokepark 1 and 2 installed on a WD My Passport Ultra HDD. When I tried to boot it up in USB Loader GX, I received a black screen with an error message to reset or check the disc. I updated USB Loader GX to the latest version in Cyan's signature, but still had issues.

    I searched and read that i need to install d2x CIOS. So I installed it. Now i'm just getting a black screen and the wii disc light flickers when trying to start the game, so I can't get the same message again. I set d2x CIOS to:

    What : d2x v8 final
    where : slot 249
    base : IOS57
    version: 21008

    Now i'm afraid i might have messed up my ios/cios by installing this as it showed it was going to overwrite a file. And I'm hoping overwritting slot 249 didn't affect any other games. I have my HDD plugged into the bottom USB port and my rockband multi USB hub on the top one. I read that installing/modifying CIOS shouldn't affect Gamecube games (I use nintendont).

    I tried another Wii game and it seemed to still work, so I don't know if overwriting slot 249 with d2x CIOS is an issue. I do find it weird that I no longer get that black screen with the error message to restart/check my disc and it just goes to a black screen and the disc drive light flickers.

    1) How do I ensure my wii is properly set up?
    2) How do I get pokepark 1 & 2 to work without messing up my settings for other games?
    3) Is there anything that I should update to ensure USB Loader GX runs smoothly with all games?

    Below is my system report.

    SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
    ...runs on IOS58 (rev 6175).

    Region: NTSC-U
    System Menu 4.3U (v513)

    Drive date: 02.13.2007
    Homebrew Channel 1.1.2 running on IOS58

    Hollywood v0x11
    Console ID: 59938001
    Console Type: Wii
    Shop Channel Country: Canada (18)
    Boot2 v3
    Found 145 titles.
    Found 39 IOS on this console. 9 of them are stubs.

    IOS4 (rev 65280): Stub
    IOS9 (rev 1034): Trucha Bug, ES Identify, NAND Access
    IOS10 (rev 768): Stub
    IOS11 (rev 256): Stub
    IOS12 (rev 525): Trucha Bug, ES Identify, NAND Access
    IOS13 (rev 1031): Trucha Bug, ES Identify, NAND Access
    IOS14 (rev 1031): Trucha Bug, ES Identify, NAND Access
    IOS15 (rev 1031): Trucha Bug, ES Identify, NAND Access
    IOS16 (rev 512): Stub
    IOS17 (rev 1031): Trucha Bug, ES Identify, NAND Access
    IOS20 (rev 256): Stub
    IOS21 (rev 1038): Trucha Bug, ES Identify, NAND Access
    IOS22 (rev 1293): Trucha Bug, ES Identify, NAND Access
    IOS28 (rev 1806): Trucha Bug, ES Identify, NAND Access
    IOS30 (rev 2816): Stub
    IOS31 (rev 3607): Trucha Bug, ES Identify, NAND Access
    IOS33 (rev 3607): Trucha Bug, ES Identify, NAND Access
    IOS34 (rev 3607): No Patches
    IOS35 (rev 3607): Trucha Bug, ES Identify, NAND Access
    IOS36 (rev 3607): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 5662): Trucha Bug
    IOS38 (rev 4123): Trucha Bug, ES Identify, NAND Access
    IOS50 (rev 5120): Stub
    IOS51 (rev 4864): Stub
    IOS53 (rev 5662): Trucha Bug
    IOS55 (rev 5406): Trucha Bug
    IOS56 (rev 5661): Trucha Bug
    IOS57 (rev 5918): Trucha Bug
    IOS58 (rev 6175): USB 2.0
    IOS60 (rev 6400): Stub
    IOS61 (rev 5661): Trucha Bug
    IOS70 (rev 6687): Trucha Bug
    IOS80 (rev 6943): Trucha Bug
    IOS202[57] (rev 65535, Info: hermes-v5.0): Trucha Bug, NAND Access, USB 2.0
    IOS222[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223[38] (rev 4, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS249[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v10 (DIOS MIOS 2.11+)
    Report generated on 11/11/2019.


    Thanks in advance for the help!
     
    alexander1970 likes this.
    #1 Nov 11, 2019
  2. jeannotte

    jeannotte GBAtemp Advanced Fan

    Member
    7
    922
    Level 7
    Jun 15, 2016
    France
    drchink and alexander1970 like this.
    #2 Nov 11, 2019
  3. drchink
    OP

    drchink Member

    Newcomer
    3
    46
    Level 3
    Apr 8, 2009
    United States
    thanks for the reply. I have a mac, so the windows version won't work. Is there an advantage to using modmii? I could see if I can do it through windows somewhere if needed.

    The format of my harddrive is Fat32.
     
    jeannotte and alexander1970 like this.
    #3 Nov 11, 2019
  4. alexander1970

    alexander1970 GBAtemp allows me to be here

    Member
    14
    5,055
    Level 14
    Nov 8, 2018
    Austria
    Austria
    Hello.:)

    Maybe it helps you if you change this cIOS from

    IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0

    to

    IOS250[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0

    with the d2x cIOs Installer.:)
    https://wii.guide/cios.html

    You can also change the Bases from

    249 [57] + 250 [56]

    to

    249 [56] + 250 [57]

    You already said you use USBLoader GX v3.0 rev.1272.Very Good.:D
    Please also check in the
    Global Settings - Loader Settings -> Game´s IOS - 249 and Loader´s IOS -> 58.

    Thank you.:)
     
    andreiarturo, drchink and jeannotte like this.
    #4 Nov 11, 2019
  5. drchink
    OP

    drchink Member

    Newcomer
    3
    46
    Level 3
    Apr 8, 2009
    United States
    Thanks, i'll try it tomorrow. Just for my knowledge, what's the bases for?
     
    alexander1970 likes this.
    #5 Nov 12, 2019
  6. alexander1970

    alexander1970 GBAtemp allows me to be here

    Member
    14
    5,055
    Level 14
    Nov 8, 2018
    Austria
    Austria
    Hello.:)

    Ok,thank you.
    For your Question:


    The BASE represents the "Skills" of the ORIGINAL Wii IOS:

    44444el-2.jpg
     
    Last edited by alexander1970, Nov 12, 2019
    drchink and jeannotte like this.
    #6 Nov 12, 2019
  7. drchink
    OP

    drchink Member

    Newcomer
    3
    46
    Level 3
    Apr 8, 2009
    United States
    Thanks again for the help everyone. I've updated to:
    IOS250[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    and
    249 [56] + 250 [57].

    i also updated the Global Settings - Loader Settings -> Game´s IOS - 249 and Loader´s IOS -> 58.

    Pokepark 1 and 2 still don't work though. The wii still hangs on a black screen and the disc drive light flickers.

    Here is the new system log:

    SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
    ...runs on IOS58 (rev 6175).

    Region: NTSC-U
    System Menu 4.3U (v513)

    Drive date: 02.13.2007
    Homebrew Channel 1.1.2 running on IOS58

    Hollywood v0x11
    Console ID: 59938001
    Console Type: Wii
    Shop Channel Country: Canada (18)
    Boot2 v3
    Found 145 titles.
    Found 39 IOS on this console. 9 of them are stubs.

    IOS4 (rev 65280): Stub
    IOS9 (rev 1034): Trucha Bug, ES Identify, NAND Access
    IOS10 (rev 768): Stub
    IOS11 (rev 256): Stub
    IOS12 (rev 525): Trucha Bug, ES Identify, NAND Access
    IOS13 (rev 1031): Trucha Bug, ES Identify, NAND Access
    IOS14 (rev 1031): Trucha Bug, ES Identify, NAND Access
    IOS15 (rev 1031): Trucha Bug, ES Identify, NAND Access
    IOS16 (rev 512): Stub
    IOS17 (rev 1031): Trucha Bug, ES Identify, NAND Access
    IOS20 (rev 256): Stub
    IOS21 (rev 1038): Trucha Bug, ES Identify, NAND Access
    IOS22 (rev 1293): Trucha Bug, ES Identify, NAND Access
    IOS28 (rev 1806): Trucha Bug, ES Identify, NAND Access
    IOS30 (rev 2816): Stub
    IOS31 (rev 3607): Trucha Bug, ES Identify, NAND Access
    IOS33 (rev 3607): Trucha Bug, ES Identify, NAND Access
    IOS34 (rev 3607): No Patches
    IOS35 (rev 3607): Trucha Bug, ES Identify, NAND Access
    IOS36 (rev 3607): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 5662): Trucha Bug
    IOS38 (rev 4123): Trucha Bug, ES Identify, NAND Access
    IOS50 (rev 5120): Stub
    IOS51 (rev 4864): Stub
    IOS53 (rev 5662): Trucha Bug
    IOS55 (rev 5406): Trucha Bug
    IOS56 (rev 5661): Trucha Bug
    IOS57 (rev 5918): Trucha Bug
    IOS58 (rev 6175): USB 2.0
    IOS60 (rev 6400): Stub
    IOS61 (rev 5661): Trucha Bug
    IOS70 (rev 6687): Trucha Bug
    IOS80 (rev 6943): Trucha Bug
    IOS202[57] (rev 65535, Info: hermes-v5.0): Trucha Bug, NAND Access, USB 2.0
    IOS222[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223[38] (rev 4, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS249[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v6
    MIOS v10 (DIOS MIOS 2.11+)
    Report generated on 11/12/2019.
     
    alexander1970 likes this.
    #7 Nov 12, 2019
  8. The Real Jdbye

    The Real Jdbye Always Remember 30/07/08

    Member
    19
    GBAtemp Patron
    The Real Jdbye is a Patron of GBAtemp and is helping us stay independent!

    Our Patreon
    18,278
    Level 19
    Mar 17, 2010
    Norway
    Alola
    For any game that doesn't work you can try setting the IOS per game to 250. Leave the global setting set to 249. Every game should work with one or the other, the only game that doesn't is one that needs base 58, but it's a fitness game "Your Shape" which requires a USB peripheral. Most aren't likely to want to play it and even if they did they would need the USB peripheral.
    If you encounter a game that does not work on 249 or 250 then it might have some sort of anti-piracy: Try disabling all options like video mode (set it to disc default or console default), VIDTV patch, ocarina, reboot to channel and so on for that specific game. Anything that modifies the game. Also you can try with 002 fix set to both ON and ANTI (I am not sure what is the correct setting for that these days, first ON was required then ANTI)
    If the game still won't work after that, it's likely a bad dump.
     
    Last edited by The Real Jdbye, Nov 12, 2019
    alexander1970 likes this.
    #8 Nov 12, 2019
  9. jeannotte

    jeannotte GBAtemp Advanced Fan

    Member
    7
    922
    Level 7
    Jun 15, 2016
    France
    Hello,

    EDIT /

    You can test another loader (Configurable loader v70 or wiiflow), after you see.
     
    Last edited by jeannotte, Nov 12, 2019
    alexander1970 likes this.
    #9 Nov 12, 2019
  10. drchink
    OP

    drchink Member

    Newcomer
    3
    46
    Level 3
    Apr 8, 2009
    United States
    Thanks again. Before I updated CIOS 249 and 250, I was getting a black screen with an error message, so i don't think it was a bad dump. Now i'm just getting a black screen and a flashing disc drive. Maybe i just had to change some of the settings for the anti-piracy? I should have done a system log before changing them, but I guess it's hard to tell what my CIOS were using before? I would assume it had something to do with hermes as 222 and 223 have it installed.

    I remember seeing something a few years ago about the 002 fix, but I don't remember anything about that now.

    I'll see if I can test on another loader, but I like USB Loader GX and its interface.
     
    jeannotte and alexander1970 like this.
    #10 Nov 12, 2019
  11. alexander1970

    alexander1970 GBAtemp allows me to be here

    Member
    14
    5,055
    Level 14
    Nov 8, 2018
    Austria
    Austria
    Hello.:)

    Did you verified your Games with an CRC32 / MD5 Tool please ?
    http://esrg.sourceforge.net/utils_win_up/md5sum/

    and compared it ?

    https://www.gametdb.com/Wii/R8AE01
    https://www.gametdb.com/Wii/S2LE01

    (The Checksums are on the Bottom of the Page(s).:) ).

    Pokepark 2 NTSC Version works without changing any Settings in USBLoader GX.:(
    I also noticed the DVD Light Flickering on the Blue Loading Screen.

    The Game also works with the Configurable USBLoader v70 r78.11.
    There is no DVD Light Flickering on the Blue Loading Screen.

    Works also with WiiFlow v5.2.0.


    Thank you.:)
     
    Last edited by alexander1970, Nov 12, 2019
    jeannotte likes this.
    #11 Nov 12, 2019
  12. drchink
    OP

    drchink Member

    Newcomer
    3
    46
    Level 3
    Apr 8, 2009
    United States
    Thanks, i never knew about that tool, but sadly, i'm on a mac. i tried it on Configurable USBLoader v70 r78.11 and it seems to freeze after selecting A to continue on both the pokeparks. I tried downloading the games from a different source, but still same issue. The first version (which i deleted) may have been a good one as it gave me a black screen with the disc error message previously.

    thanks all for the help. I'll try to get access to a windows computer to see if the checksums match.
     
    alexander1970 likes this.
    #12 Nov 12, 2019
  13. alexander1970

    alexander1970 GBAtemp allows me to be here

    Member
    14
    5,055
    Level 14
    Nov 8, 2018
    Austria
    Austria
    Maybe this helps you a little:

    https://pokealeaf.wordpress.com/2012/03/27/crc32-checksums-on-mac-osx/

    https://alternativeto.net/software/md5-and-sha-checksum-utility/?platform=mac

    Good Luck.
    Thank you.:)
     
    #13 Nov 12, 2019
  14. alexander1970

    alexander1970 GBAtemp allows me to be here

    Member
    14
    5,055
    Level 14
    Nov 8, 2018
    Austria
    Austria
    Hello.:)

    Pokepark 1 NTSC Version - Pikachu´s Adventure needs a little "Adjustment" in USBLoader GX:

    Settings - Game Load - Video Mode -> Force NTSC and Game Language -> English.
    All other Settings leave untouched please.

    Now it works.:yaywii:
     
    jeannotte likes this.
    #14 Nov 12, 2019
  15. drchink
    OP

    drchink Member

    Newcomer
    3
    46
    Level 3
    Apr 8, 2009
    United States
    alexander1970 likes this.
    #15 Nov 13, 2019
Quick Reply
Draft saved Draft deleted
Loading...
Similar threads with keywords: Pokepark Settings Loader Hide similar threads
  1. clutchkinder8

    HELP!! Messing with the emulated memory card settings erased my saves on USB Loader GX

    clutchkinder8, Dec 11, 2019 at 7:47 PM, in forum: Wii - Emulation and Homebrew
    Replies:
    0
    Views:
    81
    clutchkinder8
    Dec 11, 2019 at 7:47 PM
  2. Thetrain21

    Pokepark 2 on USB loader gx

    Thetrain21, Sep 21, 2019, in forum: Wii - Backup Loaders
    Replies:
    7
    Views:
    456
    alexander1970
    Sep 23, 2019
  3. Hephaestus

    USB Loader GX Settings dont affect Neek2o

    Hephaestus, Jun 7, 2019, in forum: Wii - Backup Loaders
    Replies:
    0
    Views:
    310
    Hephaestus
    Jun 7, 2019
  4. cordib

    USB Loader GX stuck on "Settings Start" screen after copying to a different storage device

    cordib, May 10, 2018, in forum: Wii - Emulation and Homebrew
    Replies:
    7
    Views:
    761
    Cyan
    May 11, 2018
  5. ZacharyAlkaff

    Has anyone used the content downloader in henkaku settings?

    ZacharyAlkaff, Aug 8, 2017, in forum: PS Vita - Hacking & Homebrew
    Replies:
    5
    Views:
    12,728
    Ryccardo
    Aug 9, 2017