Homebrew Update to Sysnand toVer. 9.2.0

[Deleted User]

ok i will give this a try! looks like this takes some time! So I am reading this and it looks like i need FBI back on the sysnand and do just like I did to upgrade with sysupdater! Is this correct?

Not really.
All you need is to setup menuhax 2.0 again but make it auto boot with a recovery key (second option)

 

[wormdood]

ok i will give this a try! looks like this takes some time! So I am reading this and it looks like i need FBI back on the sysnand and do just like I did to upgrade with sysupdater! Is this correct?

fbi should still be there

--------------------- MERGED ---------------------------

Not really.
All you need is to setup menuhax 2.0 again but make it auto boot with a recovery key (second option)

explain it to him then . . . you faster than me . . . lol

 

[toby1978]

I I uninstalled it from the sysnand! I will install it back and follow the guide! I will let you all know if I get it. A bit tired right now from a 12 hour work day! I really do appreciate all you guys helping me! Thank You!!!

 

[Deleted User]

Np
Hope you succeed!

 

[toby1978]

Well, when I open the Homebrew launcher its on a red screen and wont do anything

 

[Deleted User]

So... when you load homebrew it is a red screen. Make sure you have everything installed correctly. I would help more, but only if you would be able to provide a bit more details. Like, how you load it before the red screen

 

[toby1978]

So... when you load homebrew it is a red screen. Make sure you have everything installed correctly. I would help more, but only if you would be able to provide a bit more details. Like, how you load it before the red screen

I open it and it goes through its whole dill then stops on red screen

 

[Deleted User]

Does it load CTRBootManager?
If you haven't already configured the .cfg file it should show some white text on a pink screen

--------------------- MERGED ---------------------------

Before the red screen

 

[toby1978]

and here is how

Launching rxTools at Boot - Menuhax!
These steps will setup Menuhax, which we will configure to allow rxTools to boot the moment you turn on your 3DS/2DS! IMO this is the best way to launch rxTools.

Note: You must be on 9.0 - 9.2 firmware. This means your sysnand has to be on or between 9.0 to 9.2 system version. To update to 9.0 or 9.2, scroll down to the sectionHow to Update your 3DS/2DS to 9.0 or 9.2 and follow the instructions, then come back here.

Second note: This will only work with rxTools 3.0 nightly (from September onwards I think). No one has found a way for it to work with rxTools 2.6 and under as far as I know. The rxTools build included in Section 1 works with this.

1. Set a random theme on your 3DS, then change it back to the default theme.
2. Make sure your WiFi is on and you are connected to the Internet!!
3. Launch rxmode SysNAND (Hold L when booting rxTools to access it)
4. Open BigBlueMenu (or any other CIA installer)
5. If you already have access to the Homebrew Launcher, skip to step 9!!
6. Install hblauncher_loader.cia (it's in the CIAs folder)
7. Exit to the HOME menu; there will be a new gift. It is the Homebrew Launcher cia.
8. Launch the Homebrew Launcher via the Homebrew Launcher cia you just installed in SysNAND.
9. In the Homebrew Launcher, run the menuhax_manager installer and install menuhax.
10. After all that, test if menuhax boots you into the homebrew menu at cold boot. Just turn off your 3DS and turn it back on, and don't press any buttons.
11. On your SD card, look for the file which name starts with "ropbinpayload". Open it with HxD (included in the PC_Apps folder) or Notepad++. Maybe plain old Notepad will work too.
12. Press CTRL+F and search for boot.3dsx. There will be two results.
13. Change both to auto.3dsx and save the file.

When you turn on your 3DS, you should see the bottom screen flash multiple colors, followed by the rxTools splash screen.
The Menuhax button config is as follows:

• Menuhax loads if no buttons are held at boot.
• Menuhax does not load if any button is held at boot.

Additionally:

• If you hold L after the bottom screen turns white, you will boot into the rxTools menu.
• If you hold SELECT after the bottom screen turns white, you will boot into the CTRBootManager menu.

Some precautions:

• Changing your theme in SysNAND will remove Menuhax; that is, you would have to reinstall Menuhax again.
• If your NANDs are still linked, Menuhax would also be installed in EmuNAND. This means you will get a black screen every time you attempt to load EmuNAND. To solve this, you can either:
  • Hold any button when launching EmuNAND to disable it from loading; you will have to do this every time.
  • Unlink your NANDs (Section 6), launch EmuNAND while holding any button to disable Menuhax from loading, then change the EmuNAND theme to remove it completely from EmuNAND without removing it from SysNAND.

This is what I am trying to do! My version of cia is 1.0 for the homebrew launcher!

 

[Deleted User]

You need to install CTRBootManager on sysNAND. You cannot install it on emunand ... especially not 10.5 (assuming your launching the HBL.cia from emuNAND)

 

[toby1978]

I dont understand the whole ctrbootmanager set up config stuff

 

[Deleted User]

I dont understand the whole ctrbootmanager set up config stuff

Do not worry about that for now. That can be done later. Launch homebrew on sysNAND (like browser hax or however you launch homebrew on sysNAND) then you use menuhax manager 2.0 to set up autoboot

 

[toby1978]

the problem is I installed the hombrew cia ver 1.0 and when I open up the launcher I get a red screen and no menuhax

 

[Deleted User]

Try putting boot.3dsx with menuhax manager v2.0 in a 3ds folder on the root of your 3ds sd card and scan the QR code here

 

[toby1978]

ok will try

 

[Deleted User]

boot.3dsx is on the root, 3ds/menuhax manager v2.0 is a seperate location.

 

[toby1978]

I am going to work on this in the morning! Thanks for your help! 12 hour work day has caught up to me!

 

[Deleted User]

Np

 

[toby1978]

So I set up menuhax on the sysnand like the guide said! i turn the 3ds off turn back on to see if cold boot works and it start up to sysnand.Changed the two boot.3dsx to auto.3dsx and saved! I put card back in 3ds, turn it on and it supposed to boot flash colors and ect, well mine just launches to the sysnand! no auto boot for me?

 

[pofer]

So I set up menuhax on the sysnand like the guide said! i turn the 3ds off turn back on to see if cold boot works and it start up to sysnand.Changed the two boot.3dsx to auto.3dsx and saved! I put card back in 3ds, turn it on and it supposed to boot flash colors and ect, well mine just launches to the sysnand! no auto boot for me?

Did you modified the payload according to the guide ? If so , then you should have an auto.3dsx file on your sd card and a boot.3dsx too


To make your Emunand to coldboot you need to :

Launch the Homebrew Launcher ON YOUR SYSNAND

Run homemenuhax hax

Press A on : configure / check haxx trigger

Press A on "Type 2"

It'll ask you to hold a button (L should be the most convenient one) and touch the bottom screen

And done, it should trigger menuhax if you aren't holding the button you pressed while setting up the type 2 setting