Trinity RGH fatal crash intercepted at boot

[ganjo]

I just flashed this xbox. I see the logo then it says fatal crash intercepted and it keeps repeating about every 15 seconds. I have not installed a HDD or any apps. This is the first boot after flashing. I have tried reflashing multiple times with jrunner and through xell. Ive tried building with my original 16537 and 17559 NANDs but both give the same error. Anyone ran into this issue before? I've only ever seen this error after running apps

 

[HawaiianInTown]

You mind sharing your jrunner log, please remove private info from log when sharing. First rgh console?

 

[ganjo]

No, Ive done a bunch of them. Not sure which log was the one you wanted so I added both. Hopefully I removed all the stuff.

XELL OUTPUT WINDOW



Checking Console...

Flash Config: 0x00023010

Jasper, Trinity: 16MB



Checking Console...

Flash Config: 0x00023010



Reading Nand to W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\output\nanddump1.bin

Read Successful!



Initializing nanddump1.bin, please wait...

Nand Initialization Finished





Reading Nand to W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\output\nanddump2.bin

Read Successful!



Comparing, please wait...

Bad Block ID  01A8 Found @ 0x03FF [Offset: 0x107BE00]

Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 01A8 [Offset: 0x6D5000]

Bad Blocks Remapped

Bad Block ID  01A8 Found @ 0x03FF [Offset: 0x107BE00]

Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 01A8 [Offset: 0x6D5000]

Bad Blocks Remapped

Nands are the same



XeLL image created



Checking Console...

Flash Config: 0x00023010



Writing glitch.ecc to Nand

Write Successful!



Contacting 10.10.0.61...

6BL Lockdown Value: 9

Initializing nanddump1.bin, please wait...

CPU Key is Correct

Added Key to Database

Moving files to W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\028769312905

Nand Initialization Finished



XeBuild Initialized

Kernel Selected: 17559

KV Info saved to file

---------------------------------------------------------------

     xeBuild v1.21.810

---------------------------------------------------------------

base path changed to W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\xeBuild

---- { Image Build Mode } ----

building glitch2 image



done! fsroot found ok!

---------------------------------------------------------------

W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\028769312905\updflash.bin image built, info:

---------------------------------------------------------------

Kernel    : 2.0.17559.0

Console   : Trinity

NAND size : 16MiB

Build     : Glitch (v2)

Xell      : power on console with console eject button

Serial    : asasas

ConsoleId : asasas

MoboSerial: asasas

Mfg Date  : 07/11/2011

CPU Key   : asasasas

1BL Key   : asasas

DVD Key   : asasasas

CF LDV    : 9

KV type   : type2 (hashed - unchecked, master key not available)

---------------------------------------------------------------

    xeBuild Finished. Have a nice day.

---------------------------------------------------------------

Converting Image to RGH3...

RGH3 Conversion Finished!

Saved to W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\028769312905

Image is Ready

Initializing updflash.bin, please wait...

Nand Initialization Finished



BUILD LOG



base path changed to W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\xeBuild

---- { Image Build Mode } ----

building glitch2 image

<enter> key on completion suppressed

data directory overridden from command line to '17559/'

per build directory overridden from command line to 'data/'

file name overridden from command line to 'W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\028769312905\updflash.bin'



------ parsing user ini at 'data/options.ini' ------

loading file...done!

pre-parsing and sanitizing

done!

User options.ini loaded, 0x1a0 bytes in memory

loading cpukey.txt from data/cpukey.txt

CPU Key set to:  (weight:0x35 valid; ecd: valid)

setting 1blkey from ini:

1BL Key set to  :  sum: 0x983 (expects: 0x983)

xex Key set to  :  sum: 0x800 (expects: 0x800)

Using patchsmc option (ini file)



------ parsing ini at '17559/_glitch2.ini' ------

ini version 17559



ini: label [trinitybl] found

found (1) 'cba_9188.bin' crc: 0x5a76752d

found (2) 'cbb_9188.bin' crc: 0xfebb1074

found (3) 'cd_9452.bin' crc: 0x455fa02c

found (4) 'ce_1888.bin' crc: 0xff9b60df

found (5) 'cf_17559.bin' crc: 0x0883e155

found (6) 'cg_17559.bin' crc: 0x10fbc84d

ini dictates dual CB for this model



[rawpatch] label not found in ini



ini: label [flashfs] found

found (1) 'aac.xexp' crc: 0x52ba20e7

found (2) 'bootanim.xex' crc: 0x58b9bc04

found (3) 'createprofile.xex' crc: 0xcf1298f6

found (4) 'dash.xex' crc: 0xd2089a4c

found (5) 'deviceselector.xex' crc: 0x29ce4e91

found (6) 'gamerprofile.xex' crc: 0xceaad08d

found (7) 'hud.xex' crc: 0x08bb0757

found (8) 'huduiskin.xex' crc: 0xd15503c5

found (9) 'mfgbootlauncher.xex' crc: 0xd2ade6d7

found (10) 'minimediaplayer.xex' crc: 0xd40344c2

found (11) 'nomni.xexp' crc: 0xa909bc65

found (12) 'nomnifwk.xexp' crc: 0xee23015a

found (13) 'nomnifwm.xexp' crc: 0x2b3c49cb

found (14) 'SegoeXbox-Light.xtt' crc: 0xe0ee6049

found (15) 'signin.xex' crc: 0xc8325be2

found (16) 'updater.xex' crc: 0x3fc0dd46

found (17) 'vk.xex' crc: 0xf4e3b4ad

found (18) 'xam.xex' crc: 0x2e587769

found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5

found (20) 'xenonclatin.xttp' crc: 0x7a507ad1

found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c

found (22) 'xenonjklatin.xttp' crc: 0xe2adddfb

found (23) 'ximecore.xex' crc: 0x725fd6ac

found (24) 'ximedic.xex' crc: 0x1d992bfb

found (25) 'ximedic.xexp' crc: 0x17be369a

found (26) '..\launch.xex' crc: 0x00000000

found (27) '..\lhelper.xex' crc: 0x00000000

found (28) '..\launch.ini' crc: 0x00000000



ini: label [security] found

found (1) 'crl.bin' crc: 0x00000000

found (2) 'dae.bin' crc: 0x00000000

found (3) 'extended.bin' crc: 0x00000000

found (4) 'fcrt.bin' crc: 0x00000000

found (5) 'secdata.bin' crc: 0x00000000

------ ini parsing completed ------



output name overridden to: W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\028769312905\updflash.bin



1BL RSA pub key (1BL_pub.bin) not available, signature checks will not be performed

PIRS RSA pub key (PIRS_pub.bin) not available, signature checks will not be performed

MASTER RSA pub key (MAST_pub.bin) not available, signature checks will not be performed



------ Checking data/nanddump.bin ------

data/nanddump.bin file size: 0x1080000

nanddump header checks passed OK!

Loading NAND dump (0x1080000 bytes)...done!

Detecting NAND controller type from dump data...

    NAND dump is from a small block machine

    NAND dump uses big block controller

parsing dump into user and spare...

bad block at 0x1a8 (raw offset 0x6d5000), block ignored

copying nanddump data from block 0x3ff to block 0x1a8 for file extraction integrity

block 0x1a8 was remapped to block 0x3ff at remap instance 0

done!

cleaning up stray remaps

done!

--remap summary--

0: source: 0x01a8 dest: 0x03ff

-----------------

decrypting KeyVault at address 0x4000 of size 0x4000

keyvault decrypted OK, will use if no kv.bin is provided

decrypting SMC at address 0x1000 of size 0x3000

SMC decrypted OK, will use if no external smc.bin is provided

seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.

CF slot 0 decrypted ok LDV 0x09 Pairing: 0x28fe90

CF slot 1 decrypted ok LDV 0x08 Pairing: 0x28fe90

setting LDV from image to 9

setting pairing data from image to 0x28fe90

pairing set to: 28 fe 90

Scanning for mobile data and fsroot...Mobiles found:

    fsroot      version 112 found at offset 0x00840000 len 0x4000 page 0x00004200

    mobileB.dat version 167 found at offset 0x001db000 len 0x0800 page 0x00000ed8

    mobileC.dat version 01 found at offset 0x00a18400 len 0x0200 page 0x000050c2

    mobileD.dat version 01 found at offset 0x0024c000 len 0x0800 page 0x00001260

    mobileE.dat version 07 found at offset 0x0028e800 len 0x0800 page 0x00001474

extracting MobileB.dat from page 0xed8 (offset 0x1db000), size 2048 (0x800) bytes

extracting MobileC.dat from page 0x50c2 (offset 0xa18400), size 512 (0x200) bytes

extracting MobileD.dat from page 0x1260 (offset 0x24c000), size 2048 (0x800) bytes

extracting MobileE.dat from page 0x1474 (offset 0x28e800), size 2048 (0x800) bytes

Statistics.settings found at offset 0xf78000, size 4096 (0x1000) bytes

Manufacturing.data found at offset 0xf74000, size 4096 (0x1000) bytes

seeking security files...

crl.bin found in sector 0x270 size 0xa00...verified! Will use if external file not found.

dae.bin found in sector 0x26b size 0xd9c0...verified! Will use if external file not found.

extended.bin found in sector 0x283 size 0x4000...verified! Will use if external file not found.

fcrt.bin found in sector 0x378 size 0x4000...pub key to verify signature is not available, skipping!

verified! Will use if external file not found.

secdata.bin found in sector 0x269 size 0x400...verified! Will use if external file not found.

done!

Writing initial header to flash image



------ loading system update container ------

17559/su20076000_00000000 found, loading...done!

    Read 0xb50000 bytes to memory

checking integrity...

header seems valid, version 2.0.17559.0

header hash is OK, checking content hashes...

content hashes seem OK, everything looks good!

extracted SUPD/xboxupd.bin (0x7bfe0 bytes)

decrypting SUPD/xboxupd.bin/CF_17559.bin (0x4560 bytes)...done!

decrypting SUPD/xboxupd.bin/CG_17559.bin (0x77a76 bytes)...done!



------ Loading bootloaders and required security files ------

reading data/smc.bin failed, using smc.bin from nand dump

reset smc load address to 0x1000 size 0x3000

reading data/kv.bin failed, using kv.bin from nand dump

reading ./common/cba_9188.bin (0x1ac0 bytes)

loaded cba_9188.bin, could not check signature rsa key not present!

reading ./common/cbb_9188.bin (0x7800 bytes)

reading ./common/cd_9452.bin (0x4f20 bytes)

reading ./common/ce_1888.bin (0x5606a b pad 0x56070 b)

reading data/xell-gggggg.bin (0x40000 bytes)

extracted SUPD/xboxupd.bin/CF_17559.bin (0x4560 bytes)

extracted SUPD/xboxupd.bin/CG_17559.bin (0x77a76 bytes)

reading 17559/bin/patches_g2trinity.bin (0x91c bytes)

reading data/smc_config.bin failed, using smc_config.bin from nand dump

-------------------

checking smc_config

-------------------

extracting config

------------------

SMC config info:

------------------

Target temps: Cpu:  82 C Gpu:  78 C Edram:  76 C

Max temps   : Cpu:  89 C Gpu:  82 C Edram:  82 C

Cpu Fan     : (auto)

Gpu Fan     : (auto)

MAC Address : 7c:ed:8d:94:7f:5c

AVRegion    : 0x00000100 (NTSC-M)

GameRegion  : 0x00ff (NTSC/US)

DVDRegion   : 1

resetKey    : LRLA

---------------------

Checking for smc config data patches

smc config was not patched

---------------------

could not check signature of cba_9188.bin, 1BL RSA key not present!

done!

patch slot offset reset to: 0xb0000



------ Patching BLs and modifying patches ------

Patching BLs...Done!



------ Patching boot reasons and options into flash header ------

    Patching header for xell power reason



------ Encrypting and finalizing bootloaders ------

encoding smc.bin size 0x3000

SMC checksum: f9c96639

known clean SMC found, type: Trinity v5.1(3.01)

patching SMC reset limit at offset: 0x13b3

SMC reset limit patched successfully!

encoding kv.bin size 0x4000

decrypted keyvault has been set for reference

Master RSA pub not available, not checking hash

encoding cba_9188.bin size 0x1ac0

encoding cbb_9188.bin size 0x7800

CB 9188 seq 0x03010001 type: 0x03 cseq: 0x01 allow: 0x0001

    expected fuses:

    fuseset 00: C0FFFFFFFFFFFFFF

    fuseset 01: 0F0F0F0F0F0FF0F0 (retail slim)

    fuseset 02: F000000000000000 (sequence)

    fuseset 02: F000000000000000 (allow cseq 1)

    **dual CB flag detected!**

encoding cd_9452.bin size 0x5290

encoding ce_1888.bin size 0x56070

encoding xell-gggggg.bin size 0x40000

encoding cf_17559.bin size 0x4560

encoding cg_17559.bin size 0x77a80

encoding patches_g2trinity.bin size 0x550

done!



------ Adding bootloaders to flash image ------

adding smc.bin at raw offset 0x00001000 len 0x3000 (end 0x4000)

adding kv.bin at raw offset 0x00004000 len 0x4000 (end 0x8000)

adding cba_9188.bin at raw offset 0x00008000 len 0x1ac0 (end 0x9ac0)

adding cbb_9188.bin at raw offset 0x00009ac0 len 0x7800 (end 0x112c0)

adding cd_9452.bin at raw offset 0x000112c0 len 0x5290 (end 0x16550)

adding ce_1888.bin at raw offset 0x00016550 len 0x56070 (end 0x6c5c0)

adding xell-gggggg.bin at raw offset 0x00070000 len 0x40000 (end 0xb0000)

adding cf_17559.bin at raw offset 0x000b0000 len 0x4560 (end 0xb4560)

adding cg_17559.bin at raw offset 0x000b4560 len 0x77a80 (end 0xc0000, rest in fs)

adding patches_g2trinity.bin at raw offset 0x000c0010 len 0x550 (end 0xc0560)

Fixing up FS table...done!

Writing zeropair CG patch slot overflow data to sysupdate.xexp1

    at raw offset 0xd0000 len 0x0006bfe0 (end: 0x0013bfe0)...done!



------ adding 28 firmware files ------

extracted SUPD/aac.xexp (0x14000 bytes) (crc32: 0x52ba20e7 ini: 0x52ba20e7)

    adding as aac.xexp1 at raw offset 0x13bfe0 len 0x00014000 (end 0x0014ffe0)

extracted SUPD/bootanim.xex (0x61000 bytes) (crc32: 0x58b9bc04 ini: 0x58b9bc04)

    adding as bootanim.xex at raw offset 0x150000 len 0x00061000 (end 0x001b1000)

extracted SUPD/createprofile.xex (0xc000 bytes) (crc32: 0xcf1298f6 ini: 0xcf1298f6)

    adding as createprofile.xex at raw offset 0x1b1000 len 0x0000c000 (end 0x001bd000)

extracted SUPD/dash.xex (0x5b2000 bytes) (crc32: 0xd2089a4c ini: 0xd2089a4c)

    adding as dash.xex at raw offset 0x1c0000 len 0x005b2000 (end 0x00772000)

extracted SUPD/deviceselector.xex (0xa000 bytes) (crc32: 0x29ce4e91 ini: 0x29ce4e91)

    adding as deviceselector.xex at raw offset 0x772000 len 0x0000a000 (end 0x0077c000)

extracted SUPD/gamerprofile.xex (0x1b000 bytes) (crc32: 0xceaad08d ini: 0xceaad08d)

    adding as gamerprofile.xex at raw offset 0x77e000 len 0x0001b000 (end 0x00799000)

extracted SUPD/hud.xex (0x1d000 bytes) (crc32: 0x08bb0757 ini: 0x08bb0757)

    adding as hud.xex at raw offset 0x79b000 len 0x0001d000 (end 0x007b8000)

extracted SUPD/huduiskin.xex (0x14000 bytes) (crc32: 0xd15503c5 ini: 0xd15503c5)

    adding as huduiskin.xex at raw offset 0x7b9000 len 0x00014000 (end 0x007cd000)

extracted SUPD/mfgbootlauncher.xex (0x8000 bytes) (crc32: 0xd2ade6d7 ini: 0xd2ade6d7)

    adding as mfgbootlauncher.xex at raw offset 0x7d0000 len 0x00008000 (end 0x007d8000)

extracted SUPD/minimediaplayer.xex (0xc000 bytes) (crc32: 0xd40344c2 ini: 0xd40344c2)

    adding as minimediaplayer.xex at raw offset 0x7d8000 len 0x0000c000 (end 0x007e4000)

extracted SUPD/nomni.xexp (0xf000 bytes) (crc32: 0xa909bc65 ini: 0xa909bc65)

    adding as nomni.xexp1 at raw offset 0x7e4000 len 0x0000f000 (end 0x007f3000)

extracted SUPD/nomnifwk.xexp (0x2000 bytes) (crc32: 0xee23015a ini: 0xee23015a)

    adding as nomnifwk.xexp1 at raw offset 0x7f3000 len 0x00002000 (end 0x007f5000)

extracted SUPD/nomnifwm.xexp (0x5000 bytes) (crc32: 0x2b3c49cb ini: 0x2b3c49cb)

    adding as nomnifwm.xexp1 at raw offset 0x7f6000 len 0x00005000 (end 0x007fb000)

extracted SUPD/SegoeXbox-Light.xtt (0x6000 bytes) (crc32: 0xe0ee6049 ini: 0xe0ee6049)

    adding as SegoeXbox-Light.xtt at raw offset 0x7fd000 len 0x00006000 (end 0x00803000)

extracted SUPD/signin.xex (0x1a000 bytes) (crc32: 0xc8325be2 ini: 0xc8325be2)

    adding as signin.xex at raw offset 0x806000 len 0x0001a000 (end 0x00820000)

extracted SUPD/updater.xex (0x7000 bytes) (crc32: 0x3fc0dd46 ini: 0x3fc0dd46)

    adding as updater.xex at raw offset 0x822000 len 0x00007000 (end 0x00829000)

extracted SUPD/vk.xex (0xb000 bytes) (crc32: 0xf4e3b4ad ini: 0xf4e3b4ad)

    adding as vk.xex at raw offset 0x82b000 len 0x0000b000 (end 0x00836000)

extracted SUPD/xam.xex (0x250000 bytes) (crc32: 0x2e587769 ini: 0x2e587769)

    adding as xam.xex at raw offset 0x837000 len 0x00250000 (end 0x00a87000)

extracted nanddump/xenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5)

    adding as xenonclatin.xtt at raw offset 0xa88000 len 0x0011b000 (end 0x00ba3000)

extracted SUPD/xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1)

    adding as xenonclatin.xttp1 at raw offset 0xba3000 len 0x00018000 (end 0x00bbb000)

extracted nanddump/xenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c)

    adding as xenonjklatin.xtt at raw offset 0xbbc000 len 0x001a8000 (end 0x00d64000)

extracted SUPD/xenonjklatin.xttp (0x7000 bytes) (crc32: 0xe2adddfb ini: 0xe2adddfb)

    adding as xenonjklatin.xttp1 at raw offset 0xd64000 len 0x00007000 (end 0x00d6b000)

extracted SUPD/ximecore.xex (0x17000 bytes) (crc32: 0x725fd6ac ini: 0x725fd6ac)

    adding as ximecore.xex at raw offset 0xd6b000 len 0x00017000 (end 0x00d82000)

extracted nanddump/ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb)

    adding as ximedic.xex at raw offset 0xd83000 len 0x00090000 (end 0x00e13000)

extracted SUPD/ximedic.xexp (0x2800 bytes) (crc32: 0x17be369a ini: 0x17be369a)

    adding as ximedic.xexp1 at raw offset 0xe14000 len 0x00002800 (end 0x00e16800)

reading 17559/..\launch.xex (0xb800 bytes)

    adding as launch.xex at raw offset 0xe16800 len 0x0000b800 (end 0x00e22000)

reading 17559/..\lhelper.xex (0x4800 bytes)

    adding as lhelper.xex at raw offset 0xe23800 len 0x00004800 (end 0x00e28000)

***** could not read file '..\launch.ini', skipping *****



------ adding 5 security files ------

<- Processing crl.bin ->

reading data/crl.bin (0xa00 bytes)

crl appears crypted, attempting to decrypt with CPU key...failed! Trying alternate key...success!

    adding as crl.bin at raw offset 0xe2c000 len 0x00000a00 (end 0x00e2ca00)



<- Processing dae.bin ->

reading data/dae.bin (0xad30 bytes)

dae appears encrypted, attempting to decrypt with CPU key...failed! Attempting to decrypt with alternate key...

success!

    adding as dae.bin at raw offset 0xe30000 len 0x0000ad30 (end 0x00e3ad30)



<- Processing extended.bin ->

reading data/extended.bin (0x4000 bytes)

    adding as extended.bin at raw offset 0xe3c000 len 0x00004000 (end 0x00e40000)



<- Processing fcrt.bin ->

    could not read fcrt.bin, using data from previous parse...

    adding as fcrt.bin at raw offset 0xe40000 len 0x00004000 (end 0x00e44000)



<- Processing secdata.bin ->

reading data/secdata.bin (0x400 bytes)

    adding as secdata.bin at raw offset 0xe44000 len 0x00000400 (end 0x00e44400)



------ checking for Mobile*.dat ------

MobileB.dat found, adding from previous parse

    adding MobileB.dat as type 0x31 at raw offset 0xe48000 len 0x800 (end 0xe48800)

MobileC.dat found, adding from previous parse

    adding MobileC.dat as type 0x32 at raw offset 0xe4c000 len 0x200 (end 0xe4c200)

MobileD.dat found, adding from previous parse

    adding MobileD.dat as type 0x33 at raw offset 0xe50000 len 0x800 (end 0xe50800)

MobileE.dat found, adding from previous parse

    adding MobileE.dat as type 0x34 at raw offset 0xe54000 len 0x800 (end 0xe54800)

Statistics.settings found, adding from previous parse

    adding Statistics.settings at raw offset 0xf78000 len 0x1000 (end 0xf79000)

Manufacturing.data found, adding from previous parse

    adding Manufacturing.data at raw offset 0xf74000 len 0x1000 (end 0xf75000)



------ adding smc_config.bin ------

adding smc config to offset 0x00f7c000, len 0x400



------ cleaning up image ------

Fixing up empty FS block entries...done!

Writing FS table to image offset 0xe58000 len 0x4000 (end 0xe5c000)...done!



------ finalizing image ------

fixing up big block controller on small block NAND LBA numbers...done!

calculating ECD bytes and assembling raw image...done!

remapping 1 blocks

    copying 0x4200 bytes of LBA 0x1a8 to block 0x3ff...zero fill origin...done!

done remapping!



------ writing image to disk ------

writing file 'W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\028769312905\updflash.bin' to disk...done!

---------------------------------------------------------------

W:\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\028769312905\updflash.bin image built, info:

---------------------------------------------------------------

Kernel    : 2.0.17559.0

Console   : Trinity

NAND size : 16MiB

Build     : Glitch (v2)

Xell      : power on console with console eject button

Serial    : asasasasas

ConsoleId : asasasasassa

MoboSerial: asasasasasas

Mfg Date  : 07/11/2011

CPU Key   :

1BL Key   :

DVD Key   :

CF LDV    : 9

KV type   : type2 (hashed - unchecked, master key not available)

---------------------------------------------------------------

    xeBuild Finished. Have a nice day.

---------------------------------------------------------------

 

[HawaiianInTown]

I don't see anything outta the ordinary, bad blocks are remapped and it looks like none are in the first fifty blocks of nand. Maybe try to build a nand with your keys, and see if it boots properly.

 

[ganjo]

Im getting a red light after building a donor nand. Ill try it again in a minute

=======================
Starting Donor Nand Creation
Copying Files Into Place...
Copied KV.bin
Copied fcrt.bin
Copied SMC.bin
Copied smc_config.bin
XeBuild Initialized
Kernel Selected: 17559
---------------------------------------------------------------
xeBuild v1.21.810
---------------------------------------------------------------
base path changed to \\NAS\gaming\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\xeBuild
---- { Image Build Mode } ----
building glitch2 image

---------------------------------------------------------------
\\NAS\gaming\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\028769312905\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17559.0
Console : Trinity
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : asasasass
ConsoleId : asasasas
MoboSerial: asasasasas
Mfg Date : 07/11/2011
CPU Key : asasasasasas
1BL Key : asasasasasas
DVD Key : asasasasasasas
CF LDV : 9
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Converting Image to RGH3...
RGH3 Conversion Finished!
Saved to \\NAS\gaming\Microsoft\Xbox360\JTAG-RGH\JTAG.Apps\J-Runner\J-Runner-with-Extras\028769312905
Image is Ready
Initializing updflash.bin, please wait...
Nand Initialization Finished

Checking Console...
Flash Config: 0x00023010

Writing updflash.bin to Nand
Write Successful!

 

[HawaiianInTown]

Keep us updated

 

[ganjo]

I got it to boot using a donor SMC but it still does the same thing.

 

[Ozito]

See if this helps you.

 

[ganjo]

I watched the video and the only thing I did different was I didnt rename the files. I tried it and it changed nothing. I was able to rebuild the NAND with my SMC config this time. Still fatal error

 

[Fien]

Does this Trinity have the onboard 4GB memory module? If yes, is it possible that a installed update on it cause these problems? You can try unplugging this module (small daughter board on the mainboard) before booting it.

 

[Blakejansen]

I just flashed this xbox. I see the logo then it says fatal crash intercepted and it keeps repeating about every 15 seconds. I have not installed a HDD or any apps. This is the first boot after flashing. I have tried reflashing multiple times with jrunner and through xell. Ive tried building with my original 16537 and 17559 NANDs but both give the same error. Anyone ran into this issue before? I've only ever seen this error after running apps

Bad PLL. Redo the PLL connection.

 

[ganjo]

It does not have the onboard memory

New PLL line and I also tried a 3k instead of a 10k and still fatal

 

[Ozito]

Have you tried bypassing dashlaunch settings by powering on the xbox and then pressing the eject after 1 sec? Or creating a blank "launch.ini" that you put in the root of a USB?

 

[ganjo]

I tried pressing eject 1 sec after booting and putting a blank launch.ini in the root of a USB and still fatal

 

[Ozito]

What happens if you undo the RGH cables and flash it with the stock nand dump?

 

[Blakejansen]

What happens if you undo the RGH cables and flash it with the stock nand dump?

It will work if he flashes stock. I am almost certain the soldering is sus.

 

[LuigiGad]

From what I remember, it's a software problem. If it was a hardware problem you shouldn't have had xell working

 

[ganjo]

Ya, it works fine if I reflash it back to stock. Im gonna replace all the wiring and see if that does anything

 

[DinohScene]

Make sure you haven't got your wires running near any MOSFETs or other sources of interference.

 

[ganjo]

Replaced wiring and resistor and still fatal. Made sure to route it away from any ICs and most of the SMDs. Its tthe normal place I route the wires