Hacking Question Totally new to Nintendo Switch (Need Help)

[Albytrozz]

Because even if they were on the mobo, they would still be microscopic.

LOL that dude is probably picturing little house fuses you can change out and not what they actually are, teeny tiny little pieces of wire barely visible to the human eye in the CPU that actually physically burn out... think the filaments in a lightbulb only at a microscopic level, there's no way you're getting at them unless you have access to MIT lol.

 

[KHEOPS]

Nothing is microscopic on mobo. LoL..

here is on x360 what it looks like......
good luck with your soldering iron

 

[Albytrozz]

here is on x360 what it looks like......
good luck with your soldering iron

And those are actual physical fuses too... the ones on the Tegra X1 are a fraction of a human hair thick and buried deep in the CPU... he might need laservision instead of a soldering iron lol.

 

[Kubas_inko]

here is on x360 what it looks like......
good luck with your soldering iron

those are just 0201 SMDs. Efuses are and would be way smaller.

 

[KHEOPS]

And those are actual physical fuses too... the ones on the Tegra X1 are a fraction of a human hair thick and buried deep in the CPU...

hello
Yeah, that kind of thing.

https://www.eetimes.com/author.asp?section_id=36&doc_id=1328184

 

[Albytrozz]

hello
Yeah, that kind of thing.
https://www.eetimes.com/author.asp?section_id=36&doc_id=1328184

I don't see what the issue is, he can probably just pick up an electron microscope at Amazon lol

 

[KHEOPS]

I don't see what the issue is, he can probably just pick up an electron microscope at Amazon lol

Yes, he can.
the microscope will cost him 250 switches

Oh, no, actually, it's not that expensive.
https://www.amazon.fr/gp/product/B0...=B001ARF1RY&linkCode=as2&tag=monmicroscope-21

 

[Albytrozz]

It's not on the motherboard. All fuse located in CPU. I would change the fuse myself if it is located on the mobo.

 

[KHEOPS]

you have found the solution

 

[kkcheong]

And those are actual physical fuses too... the ones on the Tegra X1 are a fraction of a human hair thick and buried deep in the CPU... he might need laservision instead of a soldering iron lol.

Thanks for agreeing with me.

 

[Albytrozz]

Thanks for agreeing with me.

No problem Mr. Trump... even when you're totally wrong you're right... but I wasn't agreeing. If we want to get real for a moment I'm making fun of you for talking out of your ass and showing you have absolutely no clue what you're talking about... unless Switches in Malaysia have vacuum tubes lol.

 

[kkcheong]

No problem Mr. Trump... even when you're totally wrong you're right... but I wasn't agreeing. If we want to get real for a moment I'm making fun of you for talking out of your ass and showing you have absolutely no clue what you're talking about... unless Switches in Malaysia have vacuum tubes lol.

You have to start to learn how to read English before you can make fun of me. My first statement is about Switch CPU having efuse instead of fuse on mobo. If you can't even read properly, you are just making fun of yourself and you are just telling people that you are a jerk.

Oh by the way, I am Trump supporter because of libertard. Enjoy mocking me as Trump supporter! LOL

 

[TR_mahmutpek]

A bit off topic but, why so many people uses 6.x/6.0.x firmware? Isnt it brick your joycon? Also what is the safest/best and latest firmware?

 

[Kubas_inko]

A bit off topic but, why so many people uses 6.x/6.0.x firmware? Isnt it brick your joycon? Also what is the safest/best and latest firmware?

Ninty can't legaly brick anything. Only if you have permanent bridge on your joy-con to enter RCM, it will soft brick = won't get recognized.
Every FW is safe and 1.0.0 is the best.

 

[TR_mahmutpek]

Ninty can't legaly brick anything. Only if you have permanent bridge on your joy-con to enter RCM, it will soft brick = won't get recognized.
Every FW is safe and 1.0.0 is the best.

I only have AutoRCM, no modchip, no wiring things...So, updating to 6.1.0 and updating controllers are fine?! Thx for answer!

 

[KHEOPS]

A bit off topic but, why so many people uses 6.x/6.0.x firmware? Isnt it brick your joycon? Also what is the safest/best and latest firmware?

that I know for homebrew, and cfw it remains the fw 5.1.0
the last 6.1.0 is not bad, hacks work, but not better than the 5.1.0

--------------------- MERGED ---------------------------

You have to start to learn how to read English before you can make fun of me. My first statement is about Switch CPU having efuse instead of fuse on mobo. If you can't even read properly, you are just making fun of yourself and you are just telling people that you are a jerk.

Oh by the way, I am Trump supporter because of libertard. Enjoy mocking me as Trump supporter! LOL

Trump?

 

[Adran_Marit]

Hello Everyone,

Its been quite time i am on this forum but never posted anything here before. So recently i just bought a used Nintendo Switch Neon system in $200 with following things.

• Nintendo Switch Console (Neon Joycons)
• Legend of Zelda : BOTW (Digitally Installed)
• Final Fantasy XV Pocket Edition (Digitally Installed)
• Skyrim (Physical Cartridge)
• 128 GB SD Card
• Original USB Type C Wire

Other things

• Firmware is 6.0.1
• Switch Serial is Jail-breakable
• There was no Box, Straps, Adapter or Dock for the switch.
• Battery is absolutely fine can play Zelda on the for max 3 n half hours.
• Condition of the switch is also great.
• Access to eShop and Online play is possible. (Already playing Paladins and Fortnite)

Now i want to Jailbreak my console to play backups and homebrews therefore need answer or tutorials of the following points.

1. Can install and use Customer Firmware for Backups and Official Firmware for Online play on my switch.
2. How i can make a clean backup of my official OFW.
3. What CFW should i install on my Switch.
4. Should i update to 6.1 of stay on the existing OFW.
5. Any possible way to play Videos, Movies on Switch.
6. How i can install or play backups on my switch

Your step by step help is required in this. Please let me know if i am doing anything wrong as its just a week and i am still trying to learn things for my Switch,

Sorry for the bad English its not my native language.

Thank you.

Please for the love of god and all things good and pure in this universe before you run any CFW in the aforementioned guides backup you system by following this guide

https://gbatemp.net/threads/backup-...-your-biskeys-tseckeys-keys-txt-guide.513386/

if you don't and you mess something up we can't help you fix it

 

[Kubas_inko]

Please for the love of god and all things good and pure in this universe before you run any CFW in the aforementioned guides backup you system by following this guide

https://gbatemp.net/threads/backup-...-your-biskeys-tseckeys-keys-txt-guide.513386/

if you don't and you mess something up we can't help you fix it

We actually can. All we need is prodinfo. But its the last help.

 

[Adran_Marit]

We actually can. All we need is prodinfo. But its the last help.

Better safe than sorry

 

[Albytrozz]

You have to start to learn how to read English before you can make fun of me. My first statement is about Switch CPU having efuse instead of fuse on mobo. If you can't even read properly, you are just making fun of yourself and you are just telling people that you are a jerk.

Oh by the way, I am Trump supporter because of libertard. Enjoy mocking me as Trump supporter! LOL

I never said I wasn't a jerk, but I was joking about the Trump stuff until you were serious... then I threw up. Anyone that says "libtard" (the real way of saying it if you're going to try to be funny, champ.. your engrish is showing) automatically shows their missing chromosomes.

So tell me, how did you vote for Trump from Asia? Do us a favor and keep his votes over there where people obviously need a few extra school grades or learn how to read a newspaper...