Hacking The reply from Team Xecuter

Amabo

Suspended
OP
Suspended
Joined
Mar 27, 2018
Messages
71
Trophies
0
XP
562
Country
France
I sent my problem to Team Xecuter, I can't turn on my switch after used the Pro, They give me the reply
upload_2018-7-19_9-50-6.png
 

Attachments

  • upload_2018-7-19_9-48-4.png
    upload_2018-7-19_9-48-4.png
    31.5 KB · Views: 421

Amabo

Suspended
OP
Suspended
Joined
Mar 27, 2018
Messages
71
Trophies
0
XP
562
Country
France
It worked?
No, I can not turn it on

--------------------- MERGED ---------------------------

Isn't very clear exactly what you mean but can you load any payloads by PC? If so use Hekate and check your battery percentage
the dongle will not inject payload

--------------------- MERGED ---------------------------

Ok, I will do that,thanks
 
  • Like
Reactions: Shadow LAG

DocAmes1980

Well-Known Member
Member
Joined
Oct 31, 2016
Messages
873
Trophies
0
Age
43
XP
975
Country
United States
Not sure what the problem is. You've given us very little to work with. I'm guessing your Switch battery is totally drained. You may have to connect it to the charger for a while. Do you have another device that you could use to push a payload? See if that at least gets you the SX splash screen.

How about linking the video?
 

Soluble

Well-Known Member
Member
Joined
Mar 12, 2017
Messages
609
Trophies
0
Age
39
XP
588
Country
I put mine on the switch cradle. Left it for a few mins, held power(while still docked) for 15 seconds, charged the SX dongle with my S9 phone. Waited an hour and pulled the switch out of the dock. Plugged in the dongle, sxos showed up, chucked it back in the dock and let it charge.

I then removed autorcm because currently it seems to cause more issues than it solves.
 

djricekcn

Well-Known Member
Member
Joined
May 29, 2009
Messages
1,100
Trophies
1
XP
839
Country
United States
You just don't have battery in either the Switch or the Dongle

Dongle takes at most 30 seconds to charge
Switch, if it's drained, you'll need to charge it for a few hours (my friend said he charged for 6 hours) to get enough power to boot up the console in rcm
 

DocAmes1980

Well-Known Member
Member
Joined
Oct 31, 2016
Messages
873
Trophies
0
Age
43
XP
975
Country
United States
We need a stickied PSA thread about this. Powering off from Horizon does not actually power off when AutoRCM is enabled.

--------------------- MERGED ---------------------------

I put mine on the switch cradle. Left it for a few mins, held power(while still docked) for 15 seconds, charged the SX dongle with my S9 phone. Waited an hour and pulled the switch out of the dock. Plugged in the dongle, sxos showed up, chucked it back in the dock and let it charge.

I then removed autorcm because currently it seems to cause more issues than it solves.

That would probably solve the OP's problem.
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
19,012
Trophies
2
Age
29
Location
New York City
XP
13,391
Country
United States
We need a stickied PSA thread about this. Powering off from Horizon does not actually power off when AutoRCM is enabled.
Wanted to make a thread about AutoRCM actually reducing the charge rate of the Switch when in RCM after CTCaer hooked up an ammeter to the Switch to test it out but I'm not too well versed in the other intricacies about AutoRCM to make the thread.
 

Ferris1000

Well-Known Member
Member
Joined
Mar 10, 2017
Messages
249
Trophies
0
Age
33
Location
Titan
XP
2,369
Country
Germany
Try to send the payload using your pc and hold vol+ if your switch is booting into the sx os boot screen wait a few minutes and leave it connected to your pc, because with AutoRCM your Switch will turn on into rcm even if you dont press the power button.

Sometimes that’s the solution and you’ll also know your switch is in rcm or it’s powered off.
 

Soluble

Well-Known Member
Member
Joined
Mar 12, 2017
Messages
609
Trophies
0
Age
39
XP
588
Country
We need a stickied PSA thread about this. Powering off from Horizon does not actually power off when AutoRCM is enabled.

--------------------- MERGED ---------------------------



That would probably solve the OP's problem.
Yeah, my bro borrowed my switch for his work commute to see if he should get one. When he went to turn it on it was drained, he was stressing. I'd read infinite posts on here so wasn't too bothered. But combining what a few people had said that solution worked.
 

Amabo

Suspended
OP
Suspended
Joined
Mar 27, 2018
Messages
71
Trophies
0
XP
562
Country
France
Ok, here is the video
https://www.icloud.com/attachment/?...BEReNhQdw3lVhUVaQ&f=IMG_1384.MOV&sz=552316953

--------------------- MERGED ---------------------------

Not sure what the problem is. You've given us very little to work with. I'm guessing your Switch battery is totally drained. You may have to connect it to the charger for a while. Do you have another device that you could use to push a payload? See if that at least gets you the SX splash screen.

How about linking the video?
ok, here is the video, https://www.icloud.com/attachment/?...BEReNhQdw3lVhUVaQ&f=IMG_1384.MOV&sz=552316953
 

Blue

Well-Known Member
Member
Joined
Oct 2, 2015
Messages
2,606
Trophies
2
XP
1,060
Country
United Kingdom
You just don't have battery in either the Switch or the Dongle

Dongle takes at most 30 seconds to charge
Switch, if it's drained, you'll need to charge it for a few hours (my friend said he charged for 6 hours) to get enough power to boot up the console in rcm
6 hours... The dongle doesn't even have a battery it uses capacitors and they don't take nearly as long to charge.
 

qaz015393

Well-Known Member
Member
Joined
Jan 28, 2009
Messages
826
Trophies
1
XP
851
Country
United States
I had the same issue as you. I did a number of things. I quickly charged the pro dongle for a few seconds then I held the + bbutton and held it down while turning on the console to bring up the sx menu then I unpluged the dongle and plugged in my charger then selected the cfw. then I saw the console charging again once it booted. I noticed the console itself was died and with the autorcm enabled, it drained the console a bit so I disabled it (however I enabled it again bc I don't want to damage my pis with jig).
I hope it helps. the only issues I have is that the hbl (homebrew launcher) keeps giving me errors when I open it and emulators so I don't open it.
Oh and be careful when plugging in the micro usb, I actually cracked my dongle a bit when I used it (and still waiting to fix it by the end of the week)
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • Sicklyboy @ Sicklyboy:
    I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
  • TwoSpikedHands @ TwoSpikedHands:
    @Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
  • TwoSpikedHands @ TwoSpikedHands:
    I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
  • TwoSpikedHands @ TwoSpikedHands:
    I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
  • TwoSpikedHands @ TwoSpikedHands:
    I appreciate the insight!
  • The Real Jdbye @ The Real Jdbye:
    @TwoSpikedHands just switch, all the knowledge you learned still applies and most of the code and assets should be the same anyway
  • The Real Jdbye @ The Real Jdbye:
    and realistically they wouldn't

    be able to play it legally anyway since they need a ROM and they probably don't have the means to dump it themselves
  • The Real Jdbye @ The Real Jdbye:
    why the shit does the shitbox randomly insert newlines in my messages
  • Veho @ Veho:
    It does that when I edit a post.
  • Veho @ Veho:
    It inserts a newline in a random spot.
  • The Real Jdbye @ The Real Jdbye:
    never had that i don't think
  • Karma177 @ Karma177:
    do y'all think having an sd card that has a write speed of 700kb/s is a bad idea?
    trying to restore emunand rn but it's taking ages... (also when I finished the first time hekate decided to delete all my fucking files :wacko:)
  • The Real Jdbye @ The Real Jdbye:
    @Karma177 that sd card is 100% faulty so yes, its a bad idea
  • The Real Jdbye @ The Real Jdbye:
    even the slowest non-sdhc sd cards are a few MB/s
  • Karma177 @ Karma177:
    @The Real Jdbye it hasn't given me any error trying to write things on it so I don't really think it's faulty (pasted 40/50gb+ folders and no write errors)
  • DinohScene @ DinohScene:
    run h2testw on it
    +1
  • DinohScene @ DinohScene:
    when SD cards/microSD write speeds drop below a meg a sec, they're usually on the verge of dying
    +1
  • Psionic Roshambo @ Psionic Roshambo:
    Samsung SD format can sometimes fix them too
  • Purple_Heart @ Purple_Heart:
    yes looks like an faulty sd
  • Purple_Heart @ Purple_Heart:
    @Psionic Roshambo i may try that with my dead sd cards
    +1
  • Psionic Roshambo @ Psionic Roshambo:
    It's always worth a shot
  • TwoSpikedHands @ TwoSpikedHands:
    @The Real Jdbye, I considered that, but i'll have to wait until i can get the eu version in the mail lol
  • I @ I-need-help-with-wup-wiiu:
    i need help with nusspli failed downloads, can someone respond to my thread? pretty please:wub: