Hacking System Halt

[hawkz02]

HI,
was tryin to run some DPG on my M3 real runnin on Sakura 1.12 english but was unsuccessful.
only two DPG file other than that the rest all runnin fine......
the error msg is -System halt
Please refer [/SYSTEM/m3sakura/logbuf.txt

SO what needed to be done to fix it??

 

[thedicemaster]

just to start, DO WHAT THE ERROR TELLS YOU TO!
right after you get the error, turn off your DS, pull out your microSD, and open logbuff.txt in notepad.

 

[hawkz02]

just to start, DO WHAT THE ERROR TELLS YOU TO!
right after you get the error, turn off your DS, pull out your microSD, and open logbuff.txt in notepad.

that what i did and this is what i get

Start log file. topsector=2296520 size=4096byte
AppName M3Sakura firmware Version 1.12+1
Jul 10 2008 10:54:06 GMT+09:00
ARM RVCT3.1 [Build 569]
__current pc=0x02001378 sp=0x02803da0
extmem: Max memory size is 33554432byte.
Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/M3SAKURA.DAT
IRQ jump table.
adr=0x1ff020c trig=1
adr=0x1ff0260 trig=10000
----------
Shell_FAT_fopen_LanguageInit=/SYSTEM/M3SAKURA/LANGUAGE.SET
Setup default code page is '932'.
Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/LANGUAGE/CHRGLYPH.932
FreeMem=2957312byte
mainloop.
Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/LANGUAGE/MESSAGES.932
Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/SPLASH.ANI
Initialize random seed.
Open setting file. [/SYSTEM/m3sakura/M3SAKURA.DAT]
DataSectorIndex=2296536.
Load settings.
Setting load from file.
Load launch data '/SYSTEM/m3sakura/LAUNCH.DAT'
launch data load from '/SYSTEM/m3sakura/LAUNCH.DAT'.
Add launch file. [CHECKD~1.NDS]
Add launch file. [IMAGEV~1.NDS]
Add launch file. [MOONSH~1.NDS]
Add launch file. [MORNIN~1.NDS]
Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/RESUME.DAT
ResumeDataSectorIndex=2296544.
Backlight set to 3.
Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/SWAPFILE.$$$
Plugin Read headers.
prf data=0 39817us
Plugin Registed. (24x12byte)
Check current path. [/NDS]
finded. [/NDS/]
Set skin.
SkinFile_Check(...);
Shell_FAT_fopen_FullPath=/SYSTEM/M3SAKURA/DEFAULT.SKN
SkinFile_Close();
extmem: TopAddr= 0x8000000.
extmem: TermAddr= 0xa000000.
SkinFile_Open(...);
Shell_FAT_fopen_FullPath=/SYSTEM/M3SAKURA/DEFAULT.SKN
Header size=0x1778
Load color table. [colortbl.ini]
FreeMem=2920448byte
Set NextProc.
FileExistsUnicode: Not find Unicode file item. [defaultn.nds]
Allocated memory information.
idx=0 adr=0x0212a7c0 size=384 locked.
idx=1 adr=0x0212e528 size=8192 locked.
idx=2 adr=0x02130540 size=8192 locked.
idx=3 adr=0x0212a970 size=6144 locked.
idx=4 adr=0x02132558 size=2048 locked.
------------------
Used stack size 2932byte.
Total stack size 11796byte.
Event loop...
Wait for key releases.
Shell_FAT_fopen_Data=/SYSTEM/M3SAKURA/BGBMP.DAT
extmem: Total=33554432byte, Used=574396byte, Free=32980036byte, Allocated=37.
Load icons.
Current folder refreshed.
FreeMem=2127872byte
!-


Maybe you can understand it better. THANKZ

 

[Cheater388]

I guess I'm not very good at finding the problem because the only problem I see in the log is the "!" at the end of it. Personally, "!" is uninformative, so I'll try to solve the problem by a few educated guesses.

1) You coded the DPG file in settings that would have made the playing extremely unstable. Check your encoding settings.

2) Your file is corrupt and needs to be recopied or, in the worst case, re-encoded. With dpgenc, there is a dpg movie player called dpgshow. It's in the same directory. Test the file with that exe.

 

[hawkz02]

HI,
i use the dpgshow as advice and it runnin fine so i don't think it the solution 2 problem...
Is it that i need some patch in order to run it??

 

[lilaznkilla]

Try running it with moonshell it should be located in the apps section of the Sakura firmware. If moonshell can't play it. Then there's probably an error during encoding. Try converting the video file again with the converter your using or another.