1. froid_san

    froid_san GBAtemp Regular
    Member

    Joined:
    Oct 16, 2015
    Messages:
    143
    Country:
    Philippines
    I think we have a lot of eristas here (SE asia) since the 3 switch I've checked the serial before I bought mine last year are very close apart.

    also got v1
     
  2. GnK23

    GnK23 GBAtemp Regular
    Member

    Joined:
    Apr 6, 2016
    Messages:
    162
    Country:
    United States
    I have two suggestions on how to fix your problem

    1. Since your unit was bricked during the 3.0.2 os and you have emunand installed maybe the 3.0.3 os only patched the emunand. Try to insert a new sd card without emunand installed so that 3.0.3 update will fix your sysnand.

    2. Suggestion number 2 might fix or worsen your situation. Sir froid have you tried injecting the nand backup of your working emunand to your sysnand? It might fix your brick.
     
    Last edited by GnK23, Jul 3, 2020
  3. abk14459

    abk14459 Advanced Member
    Newcomer

    Joined:
    Aug 1, 2016
    Messages:
    71
    Country:
    United States
    Checkpoint 3.7.4 doesn't work on Mariko Switch on the latest version of SX
     
  4. squee666

    squee666 Trusted SX Core/Lite Installer
    Member

    Joined:
    Sep 17, 2010
    Messages:
    2,056
    Country:
    United Kingdom
    Hate to break it to you but it does used it multiple times.

    If it failed to mount save stop running the game first
     
  5. abk14459

    abk14459 Advanced Member
    Newcomer

    Joined:
    Aug 1, 2016
    Messages:
    71
    Country:
    United States
    I’ve been trying to run it in applet mode and it says to restart sx every time I try. Can you get it to run by going straight to homebrew and clicking checkpoint?
     
  6. squee666

    squee666 Trusted SX Core/Lite Installer
    Member

    Joined:
    Sep 17, 2010
    Messages:
    2,056
    Country:
    United Kingdom

    That's the only way I'm running it. Go to album and run it
     
  7. SrsRobert

    SrsRobert Member
    Newcomer

    Joined:
    Jul 19, 2017
    Messages:
    21
    Country:
    Romania
    NX-Activity-Log works on my v2 switch. Good app if you ask me, always wanted a tracker like on 3ds, it resembles that one
     
  8. IS_Nitro

    IS_Nitro Member
    Newcomer

    Joined:
    Jun 16, 2008
    Messages:
    41
    Country:
    Canada
    2nd.
     
    mussezera likes this.
  9. IS_Nitro

    IS_Nitro Member
    Newcomer

    Joined:
    Jun 16, 2008
    Messages:
    41
    Country:
    Canada
    Ok then, new development. Apparently Checkpoint on sxos can't handle an empty game-list error gracefully.

    I popped in one game cart to get a game icon in the menu and now checkpoint works fine.



    Anyone know how to get a ACNH save transferred? I tried JKSM but i got a "corrupted save" prompt upon game load.
     
    Last edited by IS_Nitro, Jul 6, 2020
    Supernova89 likes this.
  10. Jerriel

    Jerriel Advanced Member
    Newcomer

    Joined:
    Mar 13, 2018
    Messages:
    52
    Country:
    Philippines
    2. Incognito/Wipe serial in Tinfoil. Tested in emummc, your switch will freeze when booting, forcing you to recreate your emummc. I assume using this in sysmmc will result in a brick, please do not try. UPDATE: This feature has been purposely removed from newer versions of Tinfoil for Mariko sets.

    FML i got this problem for sysnand now im dead
     
  11. EAGLE-1

    EAGLE-1 Member
    Newcomer

    Joined:
    May 30, 2020
    Messages:
    13
    Country:
    Costa Rica
    hi guys, i have a mariko console with sx core installed,so if use the sx os 3.0.3 can i use ChoidujourNX for update to 10.0.4 without any risk? or better update with the nintendo servers?? thanks for the help !

    — Posts automatically merged - Please don't double post! —

    hi, i have a mariko console with sx core installed,so if use the sx os 3.0.3 can i use ChoidujourNX for update to 10.0.4 without any risk? or better update with the nintendo servers burning the fuses??,i still dont have a good info about if i use sx os 3.0.3 i can use Choidujour for update offline without any risk i really need update the console, thanks for the help,
     
  12. froid_san

    froid_san GBAtemp Regular
    Member

    Joined:
    Oct 16, 2015
    Messages:
    143
    Country:
    Philippines
    firmware 1.3 and sx os 3.0.3 should fixed the brick by ChoidujourNX and also make it safe to use ChoidujourNX on your mariko switch.

    if you are worried, use/create EMUNAND.
     
    EAGLE-1 likes this.
  13. EAGLE-1

    EAGLE-1 Member
    Newcomer

    Joined:
    May 30, 2020
    Messages:
    13
    Country:
    Costa Rica
    hi,thanks for your answer my mariko console is not brick,actually is a brand new console i just recent finish the install of the sx core,so do i need update the sx core first to 1.3 or in the moment i start sx os 3.0.3 the sx core update will update
    automatically? i ask this because i dont instal the mini usb port of sx core because is very hard to close the console,so for can use Choidujour do i need update first the sx core to 1.3 using the little ubs port?? because i dont install it :-( so still dont sure about how use Choidujour with sx core then,OR can update to 10.0.4 online? i really dont care much the fuse burning because i dont have any plans to go to a low firmware
     
    Last edited by EAGLE-1, Jul 7, 2020
  14. froid_san

    froid_san GBAtemp Regular
    Member

    Joined:
    Oct 16, 2015
    Messages:
    143
    Country:
    Philippines
    when I booted up sx os 3.0.3 on mine it asked to update my firmware to 1.3 (I also didn't put the debug usb)

    check your firmware version booing to sx os boot menu (power + vol+) -> option -> SX Core

    if on firmware 1.3 and so os 3.0.3 you can safely use Choidujour to update it on the new page of TX that's it safe to use now. Dunno about updating online.
     
    EAGLE-1 likes this.
  15. EAGLE-1

    EAGLE-1 Member
    Newcomer

    Joined:
    May 30, 2020
    Messages:
    13
    Country:
    Costa Rica
    Hi guys,well here is my case,well is a friend of mine,we install sx core in a mariko console everything goes fine,we put sx os in the micro sd card fat32 and boo fine,say about update sx core to 1.3 so we update and the console boot perfect,BUT then my friend use ChoidujourNX for offline update and now the switch only boot to sx logo and sx options but thats it,after that only get black screen,
    he trusted himself because whsta tx say about this "If you have updated SX OS past 3.03, it will be safe to update using Choi" so right now he can dump nand but can figure out whats can do now,because if sx core is in 1.03 and sx os in 3.03 why the console wont boot? really aprecaite any advice guys thanks a lot

    — Posts automatically merged - Please don't double post! —

    we do exact that as you say and console only show black screen after sx menu,we install sx core in a mariko console everything goes fine,we put sx os in the micro sd card fat32 and boo fine,say about update sx core to 1.3 so we update and the console boot perfect,BUT then my friend use ChoidujourNX for offline update and now the switch only boot to sx logo and sx options but thats it,after that only get black screen,
    he trusted himself because whsta tx say about this "If you have updated SX OS past 3.03, it will be safe to update using Choi" so right now he can dump nand but cant figure out whats can do now,because if sx core is in 1.03 and sx os in 3.03 why the console wont boot? really aprecite any advice thanks a lot
     
    Last edited by EAGLE-1, Jul 8, 2020
  16. IS_Nitro

    IS_Nitro Member
    Newcomer

    Joined:
    Jun 16, 2008
    Messages:
    41
    Country:
    Canada
    Did you make a NAND backup at any point before wiping the serial?


    Correct me if I am wrong gbatemp but from what I understand if you used Choi to update anything, it'll brick the sysnand. The 1.3 core firmware "detects"(?) this and fixes what Choi breaks. TX was very clear that Choi is still bricking HOS, but the core unit will turn around and fix it.

    If you bricked your console without the 1.3 firmware on the core you'll need to use the flex ribbon Micro USB on the core to update via the TX firmware updater software (Windows only atm).

    If you have a working Switch using 3.03 sxos will update the core, making core ready to deal with Choi's incompatibility with Mariko and iPached(?) units.

    I have not tested any of this, nor am I comfortable with trying yet... Waiting to see how things play out. I'm on 10.0.4 so I've got time.

    Also if you cut the RF shield you'll have the room you need.
     
    Last edited by IS_Nitro, Jul 8, 2020
    EAGLE-1 likes this.
  17. froid_san

    froid_san GBAtemp Regular
    Member

    Joined:
    Oct 16, 2015
    Messages:
    143
    Country:
    Philippines
    does booting on CFW or CFW emunand shows a Nintendo logo then a switch logo before going black screen?
     
    EAGLE-1 likes this.
  18. EAGLE-1

    EAGLE-1 Member
    Newcomer

    Joined:
    May 30, 2020
    Messages:
    13
    Country:
    Costa Rica

    hi!,nop only show the sx logo and then sx menu and thats all,after that black screen,i in sx core 1.3 and sx os 3.03

    — Posts automatically merged - Please don't double post! —


    well today i will try to use the little port of sx core but is not sense because right now the swicth is sx core 1.3 already and sx os in 3.03 PRIOR update with Choi so we dont know why the console wont boot
     
  19. Jerriel

    Jerriel Advanced Member
    Newcomer

    Joined:
    Mar 13, 2018
    Messages:
    52
    Country:
    Philippines
    i didnt its now bricked :( i got a new nand backup with the prodinfo but i need the biskeys to decrpyt it i contacted blawar and he gave me a program to restore it buttt i still need the bis keys
     
  20. froid_san

    froid_san GBAtemp Regular
    Member

    Joined:
    Oct 16, 2015
    Messages:
    143
    Country:
    Philippines
    have you tried making a emunand and booting from there? It's also a good idea to try a different SD card or try genuine boot (remove micro sd card if you are using a mariko unit or switch lite) It may also take a while to load 2 min tops.

    If you dump your prodkeys using the lockpick.nro before the brick you already got your biskey.
    you can also derive your biskey if you got your SBK (secure_boot_key) and tsec_key using this site https://www.sdsetup.com/biskeygen
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - compatible, Mariko, tools