Hacking Homebrew Switchroot - Android 11 - Lite - Recalibrate after replace Joystick?

[cvskid]

Since android 11 is not supported anymore is this fixed on android 15

 

[TheStonedModder]

Since android 11 is not supported anymore is this fixed on android 15

Likely not Android 15 has a lot of the same crashing bugs and performance issues imo

And you can’t really report the bugs because the lead dev hates the switch community and loses his shit the instant it is mentioned (dead ass look at his XDA thread)

I’m sure it will be fixed eventually but who knows when

 

[Earthshine]

Perhaps the Driftguard app for Android can help? If it doesn't work, there's nothing lost outside of a very small amount of time.

https://play.google.com/store/apps/details?id=com.vestracode.driftguard&hl=en_US

 

[XRed_CubeX]

Since android 11 is not supported anymore is this fixed on android 15

I used the lineage OS latest release on Switch Lite, and after the stick change the problem manifested itself. however I solved it by making many attempts, now it does not drift anymore

 

[leloc900]

When I take those axes do I have to move the analog left or right? Do I have to keep the analog or leave it?

Just leave the analog at the center/ rest position (do not touch it) and take those data.

 

[XRed_CubeX]

Just leave the analog at the center/ rest position (do not touch it) and take those data.

However, I solved it by making enough attempts

 

[leloc900]

However, I solved it by making enough attempts

Good to hear that you got it working, sorry for late reply

 

[Nephiel]

3. Joystick Calibration in HOS is saved in HOS settings itself, atmosphere and others OS doesn't have access to those data.

Is this issue specific to the built-in sticks on the Lite model?

With external Joy-Cons and Pro Controllers (official ones, at least) the calibration is stored on the controller itself, right?

 

[leloc900]

Is this issue specific to the built-in sticks on the Lite model?

With external Joy-Cons and Pro Controllers (official ones, at least) the calibration is stored on the controller itself, right?

This guide is strictly for the build-in joysticks on Lite. Depends on the console you are using, the config file will be different:
- Switch v1/v2 + joycon/pro controller: If you calibarate in Hos then dump the config file in hakete properly before setup Android, the joystick for all controller should be centered by default when you connect them

 

[Zamaelalyssa]

Hello, I replaced my joystick with the set from Gulikit for my Switch lite and calibrated them on the main OS. However, when I boot into Switchroot, both stick are still not calibrated and have default offset (please see the attached image for more details)
I'm wondering if there is anything I can do to calibrate them on Switchroot. I have tried to use program like Tincore but to no avail.
I'm currently using Switchroot Android 11 on Switch lite.
Any suggestion is much appreciated. Thank you!

View attachment 445720

UPDATE #1:
If anyone encounter this issue in the future, please see the following guide to calibrate the joystick for switchroot. Please note that this only apply to switchroot on Switch lite only
1. Connect the Switch to PC (or use a File Explorer like Mixexplorer on Android)
2. Goto SD root/ Switchroot/ and open switch.cal file
3. Input the Data into the the template: https://docs.google.com/spreadsheets/d/1VdwfTqspDoRaviHHWnntWiQiKReoAf8BWGyJYpnr_q0/template/preview
4. Open a gamepad tester (e.g https://hardwaretester.com/gamepad) and input the data into the template
5. Follow the guide in the Template to calibrate the joystick
Credit to the dev on Switchroot Discord. You can follow there for more details.



Hi!!! How i can do the conversion from the values of the web tester to switch.cal file???
I got a lot of problems on Lineage OS with some games not all but yeah a few games....

Im tired to test values of others with same issue.

 

[leloc900]

Just make a copy of the sheet: https://docs.google.com/spreadsheets/d/1VdwfTqspDoRaviHHWnntWiQiKReoAf8BWGyJYpnr_q0/template/preview
and input the value from your switch.cal file and Webtester into it. The conversion should be automatically