Reball or reflow Tegra SoC.took out the usb-c port and now that line is showing as shorted to ground.
I've had several of these where the pins in the charge port get bent. This can short the chip in the data lines just above the charger or open the filter just above that resulting in no access to RCM. I've also had it damage the tegra. System still works as normal but the data lines won't communicate with tegra resulting in no access to RCMReball or reflow Tegra SoC.
Reball or reflow Tegra SoC.
I've had several of these where the pins in the charge port get bent. This can short the chip in the data lines just above the charger or open the filter just above that resulting in no access to RCM. I've also had it damage the tegra. System still works as normal but the data lines won't communicate with tegra resulting in no access to RCM
I don't have one. I always assumed it damaged that circuit going through the processor & was not a reflow candidate.i'll try reflowing as i only have a hot air station at the moment.
is there a photo showing where those pins go on the SoC?