Switch OLED Right Joycon Rail Wont Work Post Instinct NX install

[obnoxiousmods]

'

The right side joycon just isnt working at all, the inductors read 0.006 iirc in resistance mode on my multi meter and the resistors read 178.4 OHMs and 179.0 OHMs and theyre supposed to be 180..? I think thats right tho?

What can I do to fix it, the FPC looks perfect to me and i checked continuity from the FPC pins to the resistor/indcutors and they all seem to be okay, and they go into the 3rd or 4th layer so I don't think I can replace anything else, or am I missing something?

Anyone suggest something else to check or do to fix this

THANKS SO MUCH FOR READING OR REPLYING

 

[Nephiel]

I've read about this one before - look for damaged traces around the latches of the APU shield: https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/post-10341098

 

[thesjaakspoiler]

The joycon usb line runs next to the metal shield and can get damaged when trying to remove the metal shield.
My colleague had to cut away a piece of the shielding to find the broken trace.

 

[obnoxiousmods]

I took this video of the spots recommended in that thread, I can't find any issues

Post automatically merged: Oct 18, 2024

I took this video of the spots recommended in that thread, I can't find any issues

I've read about this one before - look for damaged traces around the latches of the APU shield: https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/post-10341098

I have tried looking at the spots recommended in the thread couldn't find anything here is a video if you can help at all

Post automatically merged: Oct 18, 2024

The joycon usb line runs next to the metal shield and can get damaged when trying to remove the metal shield.
My colleague had to cut away a piece of the shielding to find the broken trace.

Can you recommend a location to look for it? I have been looking and can't find anything

 

[thesjaakspoiler]

There was a good picture in the picofly thread but the user seems to have deleted it from his imgur account.
Maybe this helps :
https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/post-10340881

 

[obnoxiousmods]

There was a good picture in the picofly thread but the user seems to have deleted it from his imgur account.
Maybe this helps :
https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/post-10340881

Ya I was looking there, thanks so much for trying to help, will give it another look anyways

 

[Nephiel]

Check this area, the damage might be beneath the shield frame, closer to the APU.

 

[obnoxiousmods]

Check this area, the damage might be beneath the shield frame, closer to the APU.

Thanks a ton will do