SvSIP: use your DS as a phone!

[mdsanta]

ok, i put in the new version and the new config setup.. but i never get anywhere.. i get a splash screen up top and a black screen on bottom....

my ds is flashme'd..Â

im using A cyclods evo

i have the .nds in both the root and in the folder.. neither work


aarrgh

(if i was at least getting error codes, i'd be less frustrated)

did you use the dldi program that was mentioned in the first few posts?

 

[nolanvoid]

cyclods auto patches dldi...

but if it's needed even considering that...

and would I get a top splash screen if dldi was not patched?

tried a generic dldi. about to try the evo's specific dldi...

ok tried the cyclo's dldi patch with chism's patcher no go same as before top splash black bottom screen

also i tried the 916 version still nothin

 

[mdsanta]

i guess next step would be to make sure your wireless is connecting properly, have you ran mario kart and tested your wifi?

 

[nolanvoid]

i guess next step would be to make sure your wireless is connecting properly, have you ran mario kart and tested your wifi?

I want to say yes, because it did last time I tried, but I'll do it agai now for the sake of troubleshooting


ok i tried the wfc connection. I have it connected... ( the wifi service) but the app still wont load

but the app shouldnt even check for a connection untill i try to connect... it just wont finish booting ( as far as I can tell)

 

[samuelv]

For micro volume option :

Just keep it in the sane range, say 0.1 to 10.0, and it should be
alright. Of course with more amplification, the audio may get
saturated (i.e. breaking up because the PCM value exceeds 16bit PCM
range).

 

[kenohki2]

Hi All,

Just wanted to add to the list of confirmed users.
I have a R4 v 1.11 using svsip 20070916.
The AP I connect to is using WRT54GL with DD-WRT using WEP.

All the svsip files reside in the svsip folder on root (/svsip).
No patch or dldi applied to the nds file.
I am using gizmo project for sip (sipphone.com).

Config File:

# This is a comment in the config file.

# Set domain sip provider (example: freephonie.net)
--domain proxy01.sipphone.com

# Set authentication username
--username XXXXX

# Set authentication password
--password XXXXX

# Optional registration interval (default 55) (for freephonie set 1800)
--reg-timeout 1800

# Optional microphone volume (default 1.0)
--micro-vol 3.0

I was able to call out with out any issues. I was also able to call into it using grandcentral with gizmo project,
but it will not work without DTMF tones (touch tone).

One thing I did discover is that the homebrew apps do not like it when you hid your ssid for your AP.

Other than those few things everything has been fine.

Thanks.

 

[zone97]

Ok, I dont get it I can not get this program to load on my R4... Here is what was tested.

R4 Kernel 1.11
Latest SvSip 20070619

Edited Config file for VoipBuster and my account.
setup and tested wifi with mario cart.

when the program loads, it get an upper splashscreen that has SvSIP on it..
lower screen is blank and green LED flashing.. This is all I have ever been able to get it to do?
Is there something Im not going right?

Update, just like kenohki2 Im am also useing a wrt-dd router, tried with and without wep.

 

[khan]

Click here to download icon which you can add using RomeR to svsip.nds.

icon gif is already optimized with settings required for it to be added by RomeR.

Hope you guys like it.

 

[zone97]

INTERESTING FIND!!!!!

I have 2 DS's a pink one (wifes) and black one... Both virgin ds's (never been flashed) I have an R4 both DS are set with the same wifi settings.

Auto IP, Web and manually set DNS entries.

SVSIP works on the black DS not the pink? how could this be? and by not working I mean you get the spash screen and nothing else?

Updated: Both DS's seem to have the same firmware.
v5: two magenta screens, so I dont think that is it.

 

[teapea]

I'm also not able to get this working.

DS Lite - M3 Simply (v1.02) - SanDisk Ultra II 1GB card

Tried several versions of SvSIP, tried patching and non-patching, tried different folder structures (as well as throwing them all in the root) and all I ever get is either:

No Patching: Splash screen and black bottom screen with error with libFat - to be expected
With Patching: Splash screen and just a black bottom screen... nothing else happens.

All my WiFi is correct, and I use the cmd line dldi patcher - which works for every other thing I've tried.

Any ideas as to what to try next?

 

[Excession]

Why does SvSIP not attempt to authenticate upon registration?

I see SvSIP attempt registration without authentication, then move straight on to issuing the INVITE.
Which, sadly, fails as well. Because there is no authentication.

 

[Excession]

OK, I should have looked at the SvSIP log. *facepalm*
I was reading the log from the SIP server side.

-Ex

 

[ZAFDeltaForce]

Click here to download icon which you can add using RomeR to svsip.nds.

icon gif is already optimized with settings required for it to be added by RomeR.

Hope you guys like it.

Nice

Thanks mate

 

[nolanvoid]

i'm glad that it seems im not losing my mind here... and that others have to share my frustration ( sorry guys, but at least im not alone)

 

[Duke_Jay]

Yay it works, it took me some time to figure it out but now i have a great time calling MC Donalds.

Thanks alot!

 

[thepete]

OK, here's a new wrinkle. I worked out what I was doing wrong with my config--I had sipphone.com instead of proxy01.sipphone.com. However, I still haven't made a successful call yet. I dial my cell phone number and it says the call is connected and "confirmed" but then I can't hear anything and my cell phone doesn't ring, either. I checked my cell phone signal strength and it's at 2 bars--not great, but good enough to get a ring and even if it wasn't wouldn't my SVSIP call go to my voicemail? I also know that I have fifty cents of credit left on my GizmoProject account, so that can't be it either.

Any ideas?

OH and I've also noticed a bit of a lag time hanging up--in the example above, I give up after 45 seconds, or so, and hit the red phone button to hang up and nothing happens for a good 15 seconds or so. Not a huge deal, just thought I'd mention it.

Any advice would be helpful! Thanks!

 

[nolanvoid]

oh, and btw, my SSID is not being broadcast, and wep is disabled on my network still no go

however i got an error message with dsorganize...

it said init fat... then this rom cannot be loaded..

 

[Tsuchy]

This is really weird i tried calling my friend who lives in South Australia from like Cali
so like i dialed 0061-041-638-2535
is basically sorta like the number she gave me its a fake one but anyways it keeps d/cing me is that right way to call there

 

[Excession]

i dialed 0061-041-638-2535


Try using 0061-4-1638-2535 instead. The Australian Telcos format mobile numbers in a funny way compared to landlines.

QUOTE(nolanvoid @ Sep 18 2007, 04:04 PM)oh, and btw, my SSID is not being broadcast, and wep is disabled on my network still no go

Lots of homebrew will not work if your (E)SSID isn't set to broadcast. Switch it back on

 

[gigermunit]

anyone wanna help me find connection info for icall.com?